ReviewsLong Jaws

MAXPOWER 2-Jaw Gear Puller 6 Inch, Reversible Puller Made with Drop-Forged and Heat-Treated Cr-V Steel, 8-Way Internal and External Removal Tool for Gears, Pulleys, Bearings and Flywheels, 2.3 Ton

  • DURABLE MATERIAL – Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. Made with carbon steel and heat-treated for durability, the drive screw runs smoothly under pressure..
  • RUST PREVENTION & CORROSION RESISTANCE – Two jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphating..
  • UNIVERSAL 8-WAY DESIGN – Versatile puller supports 8-way gripping. Reversible jaws with two holes achieve both inside and outside grip in short and long reach (short, standard, long and extra long)..
  • DAMAGE-FREE REMOVAL – Two-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • VERSATILITY – Jaw Spread: 6in, Jaw Reach: 6-1/2in. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Achieve more with its adjustable and reversible jaws..
Check Stock

SP Ableware Maddak Catheter Bathroom Clamp (729420001) ,Universal

  • Molded of strong, durable plastic with serrated jaws 1 1/16¨ (2.7 cm) long..
  • Stays on when the catheter is open to prevent loss.
Check Stock

5 1/4\ Hand Vise Jewelers Metalsmith Hobbyist Tool

  • The jaws open and close with a large wing nut.
  • The handle is hollow so that long wire will pass through.
  • The jaws measure approximately 7/16" (11 mm) wide and open to 1.5 mm.
  • It measures approximately 5 1/4" (133 mm) long.
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

IRWIN VISE-GRIP Pliers Set, 2-Piece (2078702)

  • Constructed from durable nickel chromium steel. Machined jaws for maximum gripping strength..
  • Anti-pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue..
  • Includes 6-inch slip-joint and 6-inch long nose pliers..
  • Variable-size jaws on slip-joint pliers are a flexible solution for most household needs. Long-nose pliers reach into confined areas..
Check Stock

SAMSFX Aluminum Fishing Pliers Hook Remover Braid Line Cutter with Coiled Lanyard and Sheath, Fly Fishing Knot Tying Tool & Retractors (Gray & Red Handle-7'' Split Ring Nose, Fishing Knot Tying Tool)

  • CORROSION RESISTANT MATERIALS: The anodized aluminum body delivers excellent corrosion resistance.This fishing tackle is great for long-term use without any signs of oxidation and rust.Replaceable and durable coated stainless steel jaws can open split ring and remove hooks.
  • BRAIDED LINE CUTTERS: The replaceable tungsten carbide cutter is very sharp and can cut tough braided fishing line,mono, fluorocarbon,the heaviest mono leader,fly fishing line and backing line.Only just need to line up the pliers to get a smooth and clean cut.
  • MULTI-FUNCTION JAWS: Use the serrated jaws to grab and remove any fish hook. Small hook at the top of jaws is great for opening the stubborn split rings,it can help you repair your lures.There are split lead and single-barrel crimping position on the jaws.
  • SAFETY LOCK: Unlike the spring loaded pliers, SAMSFX pliers designed with unique lock switch keeps the pliers open and close freely with just one hand. Especially when the fish tongs are not used for a long time, locking the pliers can avoid accidental injury.
  • SHEATH/LANYARD/ACCESSORIES INCLUDED:Includes....
Check Stock

Weller Xcelite NN7776VN Long Nose Plier , green

  • Weller Xcelite 6" Long Needle Nose Plier with serrated jaws is designed for accurate work in hard-to-reach area and to handle most forming, looping, twisting, insertion, and pickup jobs.
  • Extra long nose handle coil spring allows faster cutting action with reduced user fatigue.
  • Features blue cushion grips for maximum comfort.
Check Stock

RIDGID 31010 Model 10 Heavy-Duty Straight Pipe Wrench, 10-inch Plumbing Wrench, Red, Black, 250mm (10in)

  • 10" STRAIGHT PIPE WRENCH: Accommodates all forms of pipe work with strength and accuracy with a pipe capacity of 1-1/2 in..
  • FAST AND POWERFUL: Full-floating forged alloy steel hook jaws provide maximum gripping power and quick ratcheting action during pipe adjustment jobs.
  • DESIGNED FOR EASE: Features convenient self-cleaning threads and easily and quickly replaceable hook jaws, heel jaws, and spring assemblies.
  • DURABLE CONSTRUCTION: Built with ductile-iron housing and an easy to hold I-beam handle to provide long-lasting strength that can withstand heavy-duty and long-term use.
  • STANDS OUT/COMPLYING: Wrench's red color makes it easy to locate in your toolbox, and wrench complies with GGG-W65IE, Type II, and Class A federal specifications.
Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

  • Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
  • Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
  • pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
  • #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
  • #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
  • With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
  • including bowls, spindles, pens, other small turning projects, and much more.
  • Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock