ReviewsLong Spiral Drill

SharCreatives 35-Piece Screw Extractor and Drill Bit Set, Drill Bits and Multi-spline Extractors for removing tricky, stripped. damaged, broken screws, bolts, studs, fittings and more.

✔ PREMIUM 35 PCS SCREW EXTRACTOR SET - (16) left hand cobalt drill bits (5/64" - 1/2"), (13) multi-spline screw extractor (1/8" - 1/2") and (6) spiral screw extractors (#1 - #6). Ideal for removing stripped , rounded off, painted over or rusted screws and bolts. Suitable for majority sizes of a screw or a bolt..
✔ PROFESSIONAL HEAVY DUTY WITH IMPRESSIVE DESIGN AND SUPERIOR QUALITY - The left hand drill bits are made of high-quality high-speed steel. It has high hardness and durability, and it is easy to disassemble damaged screws. The spiral screw extractor made of chrome-molybdenum steel (high carbon steel) and sandblasted surface for greater durability and to withstand corrosion. The spiral pattern design can provide sufficient gripping force to facilitate removal..
✔WELL ORGANIZED IN THE CARRYING CASE - laser etched markings of sizes on bits that organized in the heavy-duty and lightweight plastic case for easy storage and transportation..
✔ COMFORTABLE, CONVENIENT AND EFFECTIVE FOR WIDE RANGE OF APPLICATIONS - The spiral flutes designed to enter deeply into the metal as you turn the tool for ....

Check Stock

Jayzod 3.5

【Make life more convenient】Save time and energy. Use in any electric or cordless drill that can accommodate a 3/8″ bit. No better tool for digging holes in your yard..
【Effective digging post holes】Jayzod’s heavy duty steel augers work with any 3/8″ or larger chucked drill, 18V or greater drill recommended. Digging hundreds of holes in minutes without worry about bending or broke,which will maximize improve your planting job..
【strong and sturdy】This garden auger spiral drill bit is so easy to use, just put it in your drill, drill a hole anywhere from an inch to several inches deep in just a couple seconds, drop your flower bulb in the hole and enjoy the beautiful flowers next spring..
【Various Applications】This solid spiral hole drill not only widely used for planting bulbs,potted plants, vegetables, flowers, bare root trees and shrubs,but also nice for drilling a hole in sand to anchor your beach umbrella,drilling holes for tents and so on..
【user-friendly size design】3.5″x16″ design will help save your back, don’t need to bent down to do your garden work.Easily digging 3.5″x16″ by using the power of your hand held drill..

Check Stock

IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119)

Designed to remove broken studs, bolts, socket screws, and fittings.
Aggressive left hand spiral design for extra gripping power.
Easy out style spiral flutes embed themselves to increase grip as resistance increases.
Extractor size and recommended drill bit size are etched on each tool.
Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5.
drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case.

Check Stock

Auger Drill Bit for Planting 4\x12\

...h.63/64 inch (2.5cm) steel shaft with non-slip hex drive 0.31 inch (0.8cm). 4" x 12" drill bit auger can work with any 3/8" or larger chucked drill,You can quickly dig holes up to 12 inches deep and 3 inches wide using the power of handheld garden drill..
【Upgrade Drill Bit for Planting】Upgraded the shape of the spiral drill bit, increased the friction of the drill bit, more time saving, faster and more convenient. 4" x 12" auger drill bit which can be used with any electric or cordless drill (18V or greater drill recommended )that can compatible most 3/8" bit..
【Garden Drill Planter】This is a kind of professional garden spiral drilling bit, made of firm heavy duty steel material, with glossy black painted finish,auger design for maximum digging performance.Perfect for planting bedside plants, bulbs, seedlings or fertilizing shrubs and trees to deep water aeration and even weed and root removal..
【Multi-Purposes】The planting auger for drill can be widely used for planting bulbs,vegetables,flowers,potted plants,bare root trees and shrubs.The drill bit can pulverizes the soil, giving your plants better soil-to-root contact.The hole digger for drill is also great for mixing paint,mortar,grass seed or fertilizer.Meanwhile,it's a good helper on y....

Check Stock

Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)

High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..

Check Stock

MIXXIDEA 10.6 Inch Pack of 4 Folding Ring Spiral Ground Anchors, Orange Metal Spiral Stake Outdoor Heavy Duty Camping Stakes Spiraling Anchor Ground Anchors for Tent, Trampolines, Sheds, Swings

STURDY SPIRAL GROUND ANCHORS - The 10.6 inch folding ring spiral ground anchor is made of powder-coated solid steel and is not easy to rust. Metal spiraling anchor has multiple uses-manual and automatic. There is a nut in the middle that can be rotated and disassembled. You can drill this spiral anchor directly into the ground with an electric drill.
EASY INSTALLATION AND USE - You only need to push the ground screw anchor head of the garden spiral stake into the ground, and you can directly rotate it by hand or electric drill until the spiral anchor is fully inserted into the ground. Outdoor camping stakes are sturdy and durable, very convenient to use, and very safe. This outdoor Spiral anchor is a good helper for your life..
MULTIPLE APPLICATIONS - You can easily use our yard anchor, it can be applied in many places, such as metal fences and wooden fences, dogs, sheds, car ports, gazebos, travel trailers, trampolines, cabins, garages, mobile homes, small buildings, playground sets, Children's swing, slide, deer stand, canopy, camping, etc..
HAPPINESS OF LIFE - When you want to read a book or listen to music in the g....

Check Stock

32\ x 2\ Extended Length Garden Auger Drill Bit for Planting Bulb & Bedding Plant Auger 100% Solid Barrel-No Need to Squat Post Hole Digger for 3/8\ Hex Drive Drill- Earth Auger Bulb Planter Tool

【No Need to Squat】Our auger drill for planting has been upgraded to extended length with seven spiral blades,longer than the old version on market.This extended length auger drill bit allows you to stand and dig. No need to squat and protect your back and knee.It can save much effort for you in massive digging.If your height is above 5.7 ft (175 cm), the 32 inches drill bit should be a better choice for you..
【Premium Quality】100% Solid Barrel,Bulb auger for cordless drill made of heavy duty steel with premium paint coated for long service time. A professional landscapers’ choice for dramatically increasing efficiency when planting bulbs, potted plants, vegetables, flowers, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes.
【Specification】Size: 0.3 inch steel shaft with non-slip hex drive 0.3 inch；2 inch diameter x 32 inch length.7 laps spiral blades.Will work with any 3/8-inch or larger drill on low (slow) speed.
For cordless drills a 14V drill minimum is recommended.Triangle drill bit designed for breaking the soil in a fast way even on hard soil..
【Widely Application】The augers post hole digger not only can he....

Check Stock

Gunsmithing At Home For Beginners And Novices

49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....

Check Stock

SharCreatives 55-Piece Master Screw Extractor Drill Bit & Guide set, Broken bolt extractor set, Multi-spline Extractors & Drill Bits for Removing Stripped, Frozen, Rusted, Roundoff Bolts, Screws, Pins

...to withstand higher temperature. This bolt extractor set makes it the ideal set for removing broken screws, bolts, studs, fittings, threaded pipes pins and more..
The Master set contains 16 high-speed steel drill bits, 13 multi spline extractors, 10 drill bit guide bits, 6 spiral screw extractors , 5 extractor pins, 5 nut extractors. Multiple specifications and sizes to meet your various work needs..
Wide range of applications: All the screw extractors are precision engineered to easily remove seized, broken studs, bolts, pipes, lugs, socket screws and fittings.
The aggressive left handed drill bits and extractors create extra gripping power. Easy-out style spiral flutes embed themselves to increase grip as resistance increases. Drill bit kit guide and long extractor pins for hard-to-reach and tight areas. Fit where others won't and can't..
55 Pieces includes: 16 high-speed steel drill bits Size:（5/64"，7/64"，1/8"，5/32"，3/16"，7/32"，1/4"，19/64"，9/32"，5/16"，11/32"，3/8"，13/32"，7/16"....

Check Stock

OXMUL Step Drill Bits for Metal, 1/8 to 1/2, Cobalt Bit, Heavy Duty for Stainless Steel,Metal, Aluminum, Wood, Copper, Wood, 13-Steps. #202

【Heavy Duty for Stainless Steel】 The Cobalt Drill Bits(1.3243 STEEL) can drill 6X longer life and 2X faster. This Drill bits is heavy duty for Stainless Steel, Metal, Galvanized Steel, Aluminum,Iron, Wood, PVC and Copper. If you want to drill faster and many holes on metal, please choose this step drill bit.
【Cobalt Bits】 Prefect for Stainless Steel/Metal Sheet/Wood/Plastic/Aluminum Sheet/Copper and other metal sheets. This Drill bit can successfully drill more and more holes easily into Stainless Steel plate like knife through butter!.
【120-DAYS WARRANTY】 - If not satisfied, Any Reason, please contact us for 100% refund or replacement.
【13 Steps︱2-Spiral-Flute︱1/4" Shank】 13-STEPS: 1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32 to 1/2 inches. 2-Spiral Flute:Clears Chips faster.
【Cutting Fluid】 Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent!.

Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

[M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
[Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
[12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
[118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
[3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.

Check Stock