ReviewsLonger Lkpro 3d Printer

Longer LK5 Pro 3D Printer FDM Large Size 3D Printer 11.8x11.8x15.7 Inch Big Print Size 90% Pre-Assembled Dual Blower Kit Silent Motherboard for DIY Home School Printing

  • 【Upgraded Dual Blower Kit】Equipped with the dual blower kit, the filament can be cooled quickly after extrusion so that the model is not prone to....
  • 【90% Pre-assembled with Stable Triangular Structure】The Upgraded Longer LK5 Pro 3d large printer is 90% Pre-assembled with build size of....
  • 【Silent and Open source Motherboard】Backed by TMC2208 ultra-silent driver, it demonstrates firm properties as well as reduces noise. With....
  • 【4.3inch Full Color Touch Screen】 The 3d printer with a 4.3inch full-color touch screen, you can say goodbye to the era of manual knobs and....
  • 【More Functions Provided】The Upgraded LK5 Pro FDM 3D Printer uses lattice glass plate, which not only makes the model easier to disassemble but....
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Black, MP05775

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot MP05792 PLA Filament, 1.75 mm Diameter, Small Spool, Natural

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05823 PLA Filament, 1.75 mm Diameter, Small Spool, Black

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Flexible TPU 3D Printers Filament 1.75mm Color is Clear Accuracy +/- 0.05mm Net Weight 1KG(2.2LB) Transparent TPU Hardness 95A…

  • 【1.75MM TPU(flexible) FILAMENT】 The TPU(flexible) filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle TPU(flexible), TRONXY 3D printer filaments have adjusted the degradability of the material for optimal performance, so TRONXY TPU(flexible) filaments are not brittle during 3D printing jobs.
  • 【+/-0.02MM TOLERANCE】TRONXY TPU(flexible) 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments.
  • 【VACUUMED SEALED PACKAGING】Some 3D printing materials can be negatively affected by moisture, so this is why TRONXY 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【100% ENVIRONMENTAL FRIENDLY】TRONXY 3D printer filaments comply with the Restriction of Hazardous Substance (....
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Cool Gray, MP05784

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05779 PLA Filament, 1.75 mm Diameter, Large Spool, Red

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05783 PLA Filament, 1.75 mm Diameter, Large Spool, Warm Gray

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

ANYCUBIC Photon Mono 4K, Resin 3D Printer with 6.23' Monochrome Screen, Upgraded UV LCD 3D Printer and Fast & Precise Printing, 5.19' x 3.14' x 6.49' Printing Size

  • 6.23″ Large Screen: Photon Mono 4K Resin 3D Printer is upgraded to a 6.23″ Monochrome LCD screen, 29% larger than ANYCUBIC Photon’s 5.5″ screen. Rapid prototyping greatly improves printing efficiency by printing single layer in 1.5S. The LCD screen is more durable, 4X longer lifespan than RGB screen..
  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19″ x 3.14″ x 6.49″, which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners..
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate..
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer’s max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in model, 2.5X faster than regular resin printers. This 3d printer is an ideal choice for you to obt....
Check Stock