ReviewsLow Carbon Steel Wool

0.028 (24 ga.) x 12\ x 24\

  • 1095 blade steel specifications: 6 inches wide * 12 inches long * 0.16 inches thick.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

10.75 inches long Kukri point Blank blade, hand forged Ladder pattern Damascus steel hunting knife blade, knife making supplies, 3 Pin hole scale, 6" sharp cutting edge

  • Overall 10.75 inches Long hand forged full tang Ladder pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches Long Kukri Point Dao Blank Blade, Hand Forged Twist Pattern Damascus Steel Hunting Knife Blade, 5" Finger Serrated Space with Finger Guard, 6" Sharp Cutting Edge

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge, 4.5' scale space

  • Overall 10.75 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 5.5 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 4 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick Ladder pattern Damascus steel Tracker blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

LAJA Imports Grass Shears/Onion/Sheep Shears, 6 Inch Carbon Steel Blade, 13 Inches Long, Coated Handle

  • 6" (150 mm) long Carbon steel steel double blade.
  • R-shaped Design, Spring-loaded Action Automatically Opens The Blade After Each Cut.
  • Used For Tightly Shearing Wool, Harvesting Delicate Plants And Topping Or Harvesting All Kinds Of Lawns At Harvest.
  • Ideal For Topiary Shearing, Ground Cover Grass/small Hedges Trimming, Flowers/fruits Harvesting, Onions Topping After Harvest.
Check Stock

ScentLok Bowhunter Elite 1 Trek Merino Wool Base Layer Thermal Shirt for Men Black Large

  • SCENT CONTROL Carbon Alloy technology. Our industry leading technology combines activated carbon, treated carbon and zeolite concealed between....
  • MOISTURE WICKING Made with a fabric that keeps you cool and dry in those high energy deer hunting scenarios. This base layer shirt allows sweat to....
  • MAXIMUM COMFORT AND MOBILITY This mid-weight thermal base layer is designed with a blend of Merino wool, modal, and Tencel that is ultra-soft and....
  • EASY DRESSING AND VENTILATION The ScentLok Bowhunter Elite:1 Trek Merino Wool Base Layer has a quarter-zip design for easy dressing and to deliver....
  • VERSATILITY Whether you are hunting, camping, hiking, snowboarding, working, or just relaxing, this comfortable thermal top will keep you at the....
Check Stock

LAJA Imports Grass Shears/Onion/Sheep Shears, 6 Inch Carbon Steel Blade, 13 Inches Long, Red Coated Handle

  • 6" (150 Mm) Long Carbon Steel Steel Double Blade.
  • R-shaped Design, Spring-loaded Action Automatically Opens The Blade After Each Cut.
  • Used For Tightly Shearing Wool, Harvesting Delicate Plants And Topping Or Harvesting All Kinds Of Lawns At Harvest.
  • Ideal For Topiary Shearing, Ground Cover Grass/small Hedges Trimming, Flowers/fruits Harvesting, Onions Topping After Harvest.
Check Stock

Oster Professional Clipmaster Large Animal Single Speed Grooming Clipping Machine with Oster Top and Bottom Blade Set & Kool Lube Spray Coolant for Farming and Horse Care Equipment

  • ...s, which is convenient Work remotely. 3. High-end durable carrying case: convenient to store and protect your wool shears.
  • ▶Multiple Accessories: 1. The same high-quality blades increase the service life of the machine. 2. Clean the brushes of the machine. 3. Regularly maintain the lubricating oil of the blade. 4. Carbon brushes to increase the life of the motor. 5. Screwdrivers to remove the filter. 6. Instructions for use.
  • ❤NOTE❤1. Please operate by professionals or operate under the guidance of professionals to avoid injury to sheep. 2. The noise of high-power wool shears is 78 decibels, which is a normal phenomenon. 3. Please maintain the blade regularly.
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

15" Long hand forged Damascus steel Hunting Bowie Knife, 2 tone Black Dollar wood with Brass finger guard, Cow Hide Leather sheath with belt loop

  • Overall 15" Long Bowie knife. 9.5" long blade Hand forged Damascus steel blade with 9 Inches cutting edge..
  • 5.5" long Black 2 tone Dollar wood with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Ladder pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock