ReviewsLow Cost Cpe

Wireless Bridge Gigabit High Speed, Aitupal 5.8G 1Gbps Point to Point WiFi Outdoor CPE with 14dBi High-Gain Antenna, Lang Range Up to 5KM, Plug and Play, 48V PoE Power, IP65 Waterproof [2-Packs]

...equency range, avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
[Power over Ethernet] wireless bridge kit has integrated active 48V Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. it work with Ethernet PoE Switch.

Check Stock

AZH Carburetor Carb Replacement for 6875/5500 W Champion Generator Model 100340 with a 389CC Engine, Champion 100155 Generator Replacement, Champion Generator 5500 6875 with Huayi P27-2-h

Champion Power CPE 40050 40058 41113 5500 6800 Watt Generator Champion Power CPE 41119 338CC OHV 5400 6400W Generator Champion Power CPE 41155 5000/6000 Watt 338cc Generator.
Champion Power CPE 41430 420CC 7500 9375 Watt Gas Generator Champion Power CPE 41511 41513 439CC 7000 9000 Watt Generator.
Champion Power CPE 41532 439CC 7000 9000 Watt 16HP 18HP Generator Champion Power CPE 41535 41537 439CC 7500 9375 Watt Generator Manual.
Money back guarantee: within 30 days from the date of purchase. We are confident in the quality of our part, and you can be confident in us. If you are not satisfied with our product, a refund will be made.
The expected time you receive the product is usually longer than it actually is. You will receive the product 5 to 7 days from the date of payment..

Check Stock

TP-Link 5GHz AC867 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 23dBi | Passive PoE Powered w/Free PoE Injector | Pharos Control CPE710

【Superior Speeds with No Wait】23 dBi Directional 2 × 2 MIMO Antenna, 256 QAM and an 80 MHz bandwidth boosts overall speeds up to 867 Mbps..
【Long-Range Wireless Transmission】Excellent beam directivity, improved latency, and noise immunity makes CPE710 an ideal choice and cost-effective....
【Stable Structural Design and Flexible Installation】Snap-lock parts make assembly simple and convenient. Pole mount kits and the freedom of....
【Pharos Control – Centralized Management System】CPE710 comes equipped with Pharos Control centralized management software, the web-based PharOS....
【IP65 Weatherproof】Durable IP65 weatherproof enclosure along with 15kV ESD and 6kV lightning protection ensures all-weather suitability..

Check Stock

Festa Radon AMG Maverick Radon Fan - Quiet and Energy Efficient 260 CFM Radon Mitigation System Inline Duct Fan - 4" Electric Inline Fan - Made with Sturdy Glass Reinforced Poly-Resin – White

2 UNITS Ubiquiti NanoStation Loco M5 READY TO INSTALL, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor..
Ubiquiti NanoStation LocoM5 features the CPE design that expanded the global Wireless ISP industry..
Ubiquiti versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services..
Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks..
NanoStation locom5 can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE..

Check Stock

Ueevii 5.8G Point to Point Wireless Bridge CPE820&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional..
Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps..
360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and sm....

Check Stock

Ueevii 5.8G Point to Point Wireless Bridge CPE830&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

CPE830 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional..
Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps..
360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and sm....

Check Stock

Mikrotik Outdoor Access Point CPE DISC Lite5 ac Point to Point 21 dBi Dual Chain Antenna with 5GHz 802.11a/n/ac 716 MHz CPU 256 MB RAM and 1x Gigabit Ethernet Port

The DISC Lite5 ac (RBDiscG-5acD) is a low cost high gain 5 GHz CPE..
DISC Lite5 ac is equipped with 21 dBi dual chain antenna, 802.11a/n/ac integrated wireless, 716 MHz CPU, 256 MB RAM, 1x Gigabit Ethernet port and RouterOS Level 3 license..
It comes complete with a power supply, Gigabit PoE injector and a mounting ring..
The DISC Lite5 ac is also compatible with our SXT mounting systems, including the quickMOUNT pro series..
DISC Lite5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed..

Check Stock

Ueevii 5.8G Point to Point Wireless Bridge CPE452&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

...h-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost..
Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter..
360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM. Trees....

Check Stock

Ubiquiti NanoStationM2 Bundle of 2 NanoStationM Indoor/Outdoor airMAX CPE Router - NSM2

Ubiquiti NanoStation M2 NSM2 2.4GHz 2x2 MIMO Indoor/Outdoor airMAX CPE - Router 802.11n (2-Pack).
Featuring a panel antenna and dual-polarity performance, the NanoStation M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor..
The NanoStation M features the CPE design that expanded the global Wireless ISP industry..
The NanoStation M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE..
With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration..

Check Stock

Gigabit Wireless Bridge, KuWFi 1200Mbps WiFi Bridge Point to Point Outdoor, 2.4&5.8G Long Range WiFi Bridge CPE with Panel Antenna Up to 5KM with 48V PoE Power[2-Pack]

... Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, build in dual band panel WiFi antenna, the PTP/PTMP WiFi range more than 5KM.
Power over Ethernet - Outdoor AP CPE2200 has integrated active Power over Ethernet (PoE), 10/100/1000Mbps WAN/LAN ports, for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.
Multiple Operation Mode - support wireless AP, WiFi Repeater operation mode, max to meet with different operation request.
With Access Control System under AP/WDS operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore, Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this AP more professional in WiFi Projects.

Check Stock

KuWFi 2-Pack Wireless Ethernet Bridge, Long Range WiFi Access Point 5.8G Outdoor AP CPE Kit IP65 Waterproof WiFi Bridge Point to Point Support 2KM for PTP/PTMP(Pre-Program)

【What KuWFi CPE200 is】an 11AC 5GHz 900Mbps wireless bridge point to point outdoor CPE Kit with ethernet port. The Wi-Fi range to up to 2KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃.
【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200 gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR.
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode.
Support SSID broadcasting, Multi SSID up to 4.
WiFi coverage before 2 houses with 2KM distance. It transmits via wireless WiFi, reducing the trouble of wiring cable.

Check Stock