ReviewsLow Frequency Transforme

DDARKHORSE TX12 Karaoke Pre-Effects KTV Professional Digital Audio Echo Effect Processor DSP Audio Processor with Bluetooth USB (TX12-110V)

  • Professional pre-amplifier adopts dual-mode reverb processing, which makes the vocal effect more abundant, natural and transparent. It is a high-fidelity smooth natural sweet style stereo dual reverb and multi-purpose karaoke effect. The output has front (rear) left and right channels, center channel, and subwoof frequency channel. And it is very simple and convenient to use like karaoke amplifier..
  • High-grade aluminum alloy panel is transported, 1U ultra-thin design, using karaoke adjustment to make debugging more convenient and easy.
  • This machine has Bluetooth audio input, optical fiber input, USB input.
  • LED display screen, four sets of output with spectrum jump..
  • The microphone is equipped with 6-band parameter equalization adjustment, the adjustment range is wider, the sound is more delicate and soft, and the original tone is not damaged, the single-band sound quality effect is improved, and the howling frequency is effectively processed..
  • Subwoof channel output design with crossover point and adjustable output gain.
  • Subwoof channel has a perfect anti-low-frequency self-excitation circuit, when entering the MIC, the low-frequency signal output port is automatically attenuated by half to prevent low-frequency howling and damage to the device.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • Features: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M....
Check Stock

Juried Engineering CD4046BE CD4046B CD4046 CMOS Micropower Phase-Locked Loop Breadboard-Friendly IC DIP-16 (Pack of 5)

  • ...gnal-input amplifier and a common comparator input..
  • Very low power consumption: 70 µW (typ.) at VCO, VCO inhibit control for ON-OFF keying and ultra-low standby power consumption fo = 10 kHz, VDD = 5 V, Source-follower output of VCO control input (Demod. output), 100% tested for quiescent current at 20 V.
  • Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k, High VCO linearity: 003c1% (typ.) at VDD = 10 V, 5-V, 10-V, and 15-V parametric ratings.
  • Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V, Choice of two phase comparators: Exclusive-OR network (I) Edge-controlled memory network with phase-pulse output for lock indication (II), Zener diode to assist supply regulation, Standardized, symmetrical output characteristics, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
  • A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization, Voltage-to-frequency conversion, Tone decoding, FSK - Modems, Signal conditioning,.
Check Stock

Juried Engineering CD4046BE CD4046B CD4046 CMOS Micropower Phase-Locked Loop Breadboard-Friendly IC DIP-16 (Pack of 10)

  • ...gnal-input amplifier and a common comparator input..
  • Very low power consumption: 70 µW (typ.) at VCO, VCO inhibit control for ON-OFF keying and ultra-low standby power consumption fo = 10 kHz, VDD = 5 V, Source-follower output of VCO control input (Demod. output), 100% tested for quiescent current at 20 V.
  • Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k, High VCO linearity: 003c1% (typ.) at VDD = 10 V, 5-V, 10-V, and 15-V parametric ratings.
  • Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V, Choice of two phase comparators: Exclusive-OR network (I) Edge-controlled memory network with phase-pulse output for lock indication (II), Zener diode to assist supply regulation, Standardized, symmetrical output characteristics, Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
  • A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization, Voltage-to-frequency conversion, Tone decoding, FSK - Modems, Signal conditioning,.
Check Stock

Amprobe ALC-110 True-RMS AC Leakage Current Clamp with Mechanical Lock Jaw, 6000 Counts Digit Large Scale, Red

  • Low influence of external low frequency magnetic fields: @ IN: 3. 500 mA – 600. 0 mA ≤ 30 A/m, operating class 2.
  • True-rams measurements for accuracy when measuring complex, non-sinusoidal waveforms.
  • Mechanical jaw lock to assure accuracy of low current measurements, avoiding disturbance from measured wires and magnetic fields.
  • Selectable filters: low pass 50/60Hz filter to perform measurements on equipment driven by variable frequency drives (VFDs) or affected by high frequency noise, appliance filter to conduct leakage current measurements on appliances and no filter.
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

ButtKicker BK-LFE Low Frequency Effects System

  • Offers true infrasonic, or low-frequency response with a resonant frequency of 9 Hz.
  • Attaches to seats and floors, and sends low-frequency sound directly into the listener's body.
  • Accurately reproduce the feeling range of many natural and man-made sounds.
  • Power handling ranges from a minimum of 400 watts to a 1,500-watt maximum.
  • Measures 5.375 x 5.5 x 5.375 inches (WxHxD), and weighs 11 pounds.
Check Stock