ReviewsLow Profile Jack

Cable Matters 10-Pack Low Profile 4-Port Cat5e, Cat6 Keystone Jack Wall Plate in White

  • 4 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
  • Accepts many types of keystone jacks including RJ45 Cat 6 Ethernet, HDMI, RG6 coax, banana plug, and more.
  • Single gang cover plate fits a standard-sized receptacle with the included mounting screws.
  • Add a new patch cable location using a low voltage mounting bracket.
  • Low profile cable wall plate with a cover that is almost flush with the wall.
  • Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.
  • Cost effective 10 pack of keystone jack wall plates provides enough outlet plates for a few renovation projects at home or in the office.
  • UL listed keystone jack (E486099) wall plate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic construction.
Check Stock

Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord

  • TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
  • THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
  • EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
  • MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
  • Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
Check Stock

Jackco 3 Ton Low Profile Aluminum Racing Floor Jack with 3 Ton Aluminum Jack Stands

  • 3 Ton Aluminum Low Profile Racing Jack: Aircraft billet aluminum construction Dual Plunger for quick lift.
  • 3 Ton Aluminum Jack Stands: Aircraft-grade aluminum Lightweight - less than 5 lbs. each 6 adjusting positions from 9.5” to 15.25”.
Check Stock

UrMarketOutlet Megan Racing 2PCS Universal Low Profile Drive-On Detachable Auto Service Ramp Black MR-RAMP-01

  • Material: High Strength Plastic Composite.
  • Style: Low Profile Drive-On (Detachable).
  • Dimension: 27.8" x 7.8" x 3.5" (707 x 200 x 90mm).
  • Quantity: 2 Pieces (Detachable into 4 Pieces).
Check Stock

Tomioka Racing Super Slopes - Low Profile Car Ramps Perfect for Lowered Cars, Raise Your Car Up for Floor Jacks

  • Compact design perfect for storing in your garage, both sit into each other.
  • Raises vehicle 3 inches off the ground to give access to floor jack points.
  • Perfect for lowered vehicles that are not tall enough to get a floor jack under.
  • Low Profile with a low slope incline that works well to save the front lip of your car.
  • Light Weight & Easy to Store giving you an easy tool to tuck away under your tool box.
Check Stock

9TRADING 1100 lbs Auto Transmission Jack Adapter Capacity Transform Automotive Floor Jack

  • OTC's rugged, stable, 2,000 lb. capacity transmission jack is ideal for handling heavy transmissions like the Eaton Fuller Roadranger transmissions used in most Class 7 & 8 trucks (adapter included).
  • Low profile design gets under the lowest clearance trucks making it ideal for clutch repair work.
  • Built in safety overload feature prevents using the jack beyond its rated capacity.
  • safety bypass protects the hydraulic cylinder from damage.
  • Features a pump handle that conveniently rotates a full 360 degrees for use in any position and 3.5 inch, ball bearing swivel casters for easy jack positioning.
  • Min. height - 6-7/8 in., max. height - 35-1/4 in., max. forward tilt - 24 deg., max. backward tilt - 18 deg., max. side tilt (either side) - 11 deg., overall length - 43-1/2 in., overall width - 26 in..
Check Stock

Arcan 2 Ton Low Profile Quick Rise Steel Floor Jack A20015 / XL20 Black 26 Inch & Pro-Lift T-6906D Double Pin Jack Stand - 6 Ton 1 Pack

  • Product 1: COLORS MAY VARY: XL20 = A20015.
  • Product 1: LOW PROFILE FRAME: For easy access under low ground clearance vehicles..
  • Product 1: DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load..
  • Product 1: UNIVERSAL JOINT RELEASE MECHANISM: Provides precise control of jack..
  • Product 2: Sturdy stamped Steel Construction with 6 ton capacity.
Check Stock

Arcan 2 Ton Low Profile Quick Rise Steel Floor Jack A20015 / XL20 Black 26 Inch & Pro-Lift T-6903D Double Pin Jack Stand - 3 Ton 1 Pack

  • Product 1: COLORS MAY VARY: XL20 = A20015.
  • Product 1: LOW PROFILE FRAME: For easy access under low ground clearance vehicles..
  • Product 1: DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load..
  • Product 1: UNIVERSAL JOINT RELEASE MECHANISM: Provides precise control of jack..
  • Product 2: Sturdy stamped Steel Construction with 3 ton capacity.
Check Stock

HPDMC 22 Ton Quick Lift Air/Floor Hydraulic Air Axle Bottle Jack - Heavy Duty Steel Service Bottle Jack Truck Lift Built-in Wheels

  • 【Excellent Support Performance】Racing floor jack can be used for general or specialty use and features a 2.5 ton (5,000 lb) load capacity.
  • Quick lift pump allows you to easily raise the jack to the desired height..
  • 【Low Profile Frame】For easy access under low ground clearance vehicles.
  • Ideal for most cars, motorcycles and other lifting support needs..
  • 【Premium Manufacturing Level】Constructed with heavy duty steel, providing long term durability with an industrial luster.
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability..
  • 【Eassy Carrying】Built-in carrying handle, allowing for the jack to be lifted quickly.
  • Includes a portable carrying case for easy storage when not in use..
  • 【Greater Safety And Reliability】Features a built-in safety overload system prevents use beyond load capacity.
  • Includes a limited 1 year manufacturer warranty..
Check Stock

Heavy duty 3 Ton Floor Jack Low Profile Hydraulic Jack Steel Service Jack Quick Rise With Double Pump Quick Lift

  • 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm).
  • Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue..
  • Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point..
  • Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle.
  • Low Profile jack complies with ASME PASE/2014 Safety Standard.
Check Stock

K Tool International 2 Ton Extra Low Profile Service Jack; Long Pump Handle, Dual Pump Pistons, Hydraulic Ram Protection, Heavy Duty Steel; KTIXD63105

  • [2 TON CAPACITY]- 2 ton capacity extra long low profile service jack for easy access under low ground clearance vehicles.
  • [LIFT RANGE]- Lift range from 2.75" to 24" provides users with variable lifting capabilities.
  • [LONG PUMP HANDLE]- 45.25" long pump handle for easy pumping under load.
  • [DUAL PISTONS]- Dual pump piston power unit raises saddle to maximum height in 8 full incremental pump strokes with no load.
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity and over extension of ram.
Check Stock