ReviewsLow Smoke And Flame Heat Shrink Tubing

DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power

  • 1.Heat Shrinkable Tubing Thicknessl is 0.15MM,Length is 3M..
  • 3.Warm Reminder :Battery Heat shrink Tubing Width is 150±1MM .So Pls calculate ur battery pack or mechine size exactly,IF not ,it will too big or small .coz I hope i dont waste ur time and hope u have a Happy Shopping..
  • 4.PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯.
  • 5.Shrinkable Plastic Tube Sleeve ,Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
Check Stock

10pcs 6 Gauge 6 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

Wirefy 1-1/2\ Heat Shrink Tubing - Large Diameter - 4:1 Ratio - Adhesive Lined - Industrial Heat-Shrink Tubing - 50 Feet Roll - Black

  • 4:1 SHRINK RATIO - Recovers to 1/4 of its original diameter, and makes a tight seal. Highest heat shrink ratio on the market..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Marine grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1-1/2" (40.0mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

Wirefy 1/4\ Heat Shrink Tubing - 3:1 Ratio - Adhesive Lined - Industrial Marine Heat Shrink Tubing Roll - Black - 50 Feet Roll

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1/4 INCH (6.4mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

High Heat Shrink Tubing Tube - 2:1 Heat Shrink Ratio Flame Retardant 9 Color 6 Size 162 PCS in Transparent Plastic Box (2019 New Packing Design)

  • ✔ Heat Shrink Tubing Heat Shrink Ratio: 2:1.
  • ✔ Wide Operation Temperature Range from -67℉ to 257 ℉.
  • ✔ 9 Color Available Including Yellow/Green.
  • ✔ 4" Long, 6 Different Diameters,Enough for Normal Use.
Check Stock

PRECIHW 250 Pcs Heat Shrink Spade Connectors Male and Female Wire Spade Connectors Insulated Quick Disconnect Electrical Terminal Wire Connectors 22-10 Gauge

  • ✔Package included: 250 Piecs heat shrink male/female spade connectors. These spade connectors are crafted from high quality copper, as well as heat shrink tubing with adhesive lining..
  • ✔Solid Connectioins: Our male/female spade connectors can be easily mated and pulled apart. Easy to use, more leverage for clean, solid and tight connections!.
  • ✔Male and female spade connectors comes with three different sizes, which are perfect for 22-10 gauge wire, perfect for Vehicles, boats, motorcycles, DIY electrical repairs or anything that requires an excellent waterproof connection..
  • ✔Wide Application: Ideal used for Automotive, Marine/watercraft, Electronics industries and other Outdoor Applications..
  • ✔Durable and Waterproof Heat Shrink Connectors: Waterproof dual-wall Heat Shrink Tube is Polyolefin outside and hot melt Inside to provide a fully secure seal, wire corrosion. Shrinking ratio is 3:1 to provide high tensile strength and resistance to stretch and mechanical damage. It's flame-retardant, waterproof, and can be used underground..
Check Stock

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of or....
Check Stock

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation

  • Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector).
  • Butt connectors are made of pure copper with excellent electrical conductivity. Tin plated for corrosion resistance. Perfect for marine environments and outdoor use..
  • Dual wall polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 2 inches of heat shrink tubing per connector..
  • Designed to fit solid or stranded wire. Easily connect spliced cables to connectors for a non-insulated seamless connection. Connectors can be crimped or soldered. .
Check Stock