ReviewsLow Temp Pump

Ad-Tech 2201110 Multi Temp Glue Stick, 7/16-Inch x 10-Inch, 10/Pack

  • Hot glues bond better to craft materials than most liquid glues.
  • Multi-temp glue sticks are designed to provide a variable flow from low to high temperature.
  • Works in either high temp or low temp settings.
Check Stock

VEVOR Diesel Air Heater, 5KW 12V Parking Heater, Mini Truck Heater, Single Outlet Hole, with Black LCD, Remote Control, Fast Heating Diesel Heater, For RV Truck, Boat, Bus, Car Trailer, Motorhomes

  • All-in-one Diesel Heater: Heater Power: 5KW.
  • Oil Pump Working Temp: -40℃~+40℃. Fuel Consumption: 0.1-0.24 (L/H)/ 0.026 - 0.063 Gal.
  • Fuel Gasoline: Diesel Only. We have got you covered with this diesel air heater to warm your car and remove the windows' frost on cold winter days. With fast heating and low noise, the aluminum heater runs smoothly in any harsh environment..
  • LCD & Remote Control: Our diesel parking heater is equipped with an intelligent LCD monitor and remote control. Once activated, the heater's timer and thermostat can be automatically or manually adjusted by the built-in LCD panel. Moreover, You can change the temperature via remote control, allowing you to warm the car before entering it on the cold winter morning..
  • Professional Internal Structure: Our all-in-one diesel air heater is made of aluminum for excellent protection. The combustion chamber, the base, and the heat-dissipating scale are all sand-blasted aluminum parts. It is integrally formed, featuring uniform heat dissipation, fast heat. The muffler is a great way to reduce noise and give you a quiet space..
  • Effortless Installation: The fuel tank, heater, and fuel pump of the diesel parking heater have been installed a....
Check Stock

6-in-1 Soldering Gun Toolour Solder Gun Kit, 60W Temp Adjustable Solder Iron Gun, Automatic Hand-held Welding Guns with Tin Wire and Tweezers for Electrical Circuit Board Repair Rework Home DIY

  • ...int your tin wire and tin gun with all your hands again. And you won't burn your hands accidentally any more. Detachable solder wire stand provides the most convenient solder wire feeding way while soldering, which ensures the hands-free solder supply during soldering..
  • 【Temp Adjustable Solder Iron Gun】Adjusted temperature from 260 to 480℃(500-896ºF), set specific temp for soldering job without being too hot. Turn it on with the temperature knob, and change the temperature. Heat and impact-resistant screw thread make sure the iron head is not easy to drop. Premium inner–heated ceramic technology, make the solder gun heat up in 1-2 minutes, performs great in different welding needs..
  • 【Desoldering Pump Solder Sucker】High-quality ABS built, sponge covered handle, easy to hold. The nylon pump end endures high temperatures. The high-pressure pump helps you remove excess solder from the soldering points. Additional Anti-static tweezers used for picking up small objects from PCB broad..
  • 【30 Days Back Money Guarantee & 2-Years Warranty】- 100% costumers satisfaction is our unremitting pursuit. If you have a....
Check Stock

SainSmart ePA12-CF Carbon Fiber Nylon Filament 1.75mm, 0.5kg (1.1lbs), Dimensional Accuracy +/- 0.05 mm, Black

  • [Lowest Moisture Absorption]: An upgraded formulation of 85% PA12 + 15% Carbon Fiber, this brand new SainSmart Carbon Fiber Nylon Filament absorbs much less moisture than its predecessor. The mechanical properties and dimensional stability of which are less susceptible to the temperature and humidity of the ambient environment, providing a tough and no warp material..
  • [Excellent Mechanical Properties]: This upgraded carbon fiber nylon filament has superb strength, rigidity, outstanding resistance to impact, wear, chemical and temperature and also low surface resistivity, these properties combined making this PA12+CF Filament an ideal choice for high performance applications..
  • [Improved Printability and Finish]: Adding 15% carbon fiber, this carefully formulated blend ensures ease of printability, smooth surface finish and good layer adhesion with no warping and less shrinkage..
  • [Wide Industrial Applications]: The carbon fiber reinforced material enables weight reduction and durability, suitable for functional prototypes, tools, fixtures, end-use parts, pump impellers, mechanical gears, precision and engineering components, widely used in robots, drones, and automotive and aviation industry..
  • [Tips for Printing]: As an abrasive material, the ePA12+CF Fila....
Check Stock

ARRISEA Smart Toilet with Heated Bidet, Modern One Piece Bidet Toilet with Instant Water & Warm Elongated Seat, Built-in Water-tank Toilet with Dual Flush modes, Dryer, Pre-Wet, Night Light

  • Automatically heated seat: When the seat heating function is on and senses a presence, it automatically warms up to a comfortable 99 degrees Fahrenheit, then automatically cools down to 91 degrees Fahrenheit to prevent high temperature burns..
  • Built-in Water Tank and Booster Pump Design:The Large capacity Built-in Tank and Booster Pump can provide more stronger water pressure and keep working normally when the power off. Don't need to worry the odor from the toilet because of power down. Manual mode can work normally..
  • HD digital display indicates the real-time water / seat temp, easy to tell when the temp is right for you and safe for your family, helping avoid hot or cold surprises..
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit

  • The machine is made of 6061 aluminum, 4-piece of chrome steel and 12 ton hydraulic cylinder..
  • Dual heating rods for each 4x7" heated platen - 300 watts per rod, 1,200 watts in total..
  • Recommend pairing it with 12 ton hydraulic hand pump (dp-cp590g) or other pump with NPT 1/4" male coupler..
  • Both PID temp controller and hydraulic cylinder allow replacing for a long service life..
  • Dual 15mm thick insulation wood to protect the equipment from overheating..
Check Stock

RKV4G40 4000 PSI Pressure Washer Pump Replaces RSV4G40 RRV4G40 Whats HOT

  • This pump is also a better replacement for the RSV4G40 and RRV4G40 pumps. It is commercial grade with an excellent warranty. And for the price you....
  • Both pumps side by side going through the same rigorous work, the RKV4G40 will hands down last longer than its RSV and RRV counterpart. Also the RKV....
  • With the built in unloader you run the risk of getting internal damage to the pump head and you also are limited to only being able to use one....
  • Specifications: Max. Volume: 4.0 GPM Max. Discharge Pressure: 4,000 PSI Max. Pump Speed: 3,400 RPM Shaft Diameter: 1” Hollow Max. Horsepower....
  • Max. Fluid Temp.: 140° F. Oil capacity: 13.35 oz Unloader Inlet: 3/4" GH (garden hose) Unloader Outlet: 3/8" Male Weight: 20.10 lb. This pump....
Check Stock

Happybuy MP-15RM beer brewing pump Plastic Head with 0.5 inch MPT Magnetic home brew pump 110 Volt Inline Home Brewing System Beer Pump

  • 【EASY OPERATION】- Prime by running liquid through pump prior to turning on.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • 【OPERATION QUIET】 – Advanced magnetic drive technology with static-impeller, without any leakage ever.Brew pumps very quiet..
  • 【USED WIDELY】 -This homebrew pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..
  • With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
  • 【SPECIFICATIONS】-1/2inch MPT Inlet&Outlet.
  • 【MATERIAL】- The food grade pump MP-15RM features with food grade high temp plastic head 1/2 inch thread to transfer hot and cold liquids, is the most efficient way to move piping hot and heavy loads of liquid.
Check Stock

Swimables 2 Hi-Temp Union for All Pentair Whisperflo and Intelliflo Pumps for Inground Swimming Pool 21063-200-000-2 MIP x 2 Slip PVC - Made in USA - 2 Pack

  • Perfect Fit: Custom molded to fit directly into the Whisper flo and Intelli flo pool pump. 2 inch fitting will make your plumbing work fast and easy..
  • 2 Inch Connection: These Hi Temperature Unions are made for 2 Inch PVC pipe. The threaded end is designed to fit into a 2 inch female threaded pool....
  • Installation: Simply apply a joint stick or Teflon tape to the black threaded end of the union and rotate the union onto the pool pump. Give a tight....
  • Taking Pump Out: When needing to remove your pool pump, simply untighten the union from the back ribbed nut and the pump will separate..
  • 100% Satisfaction Guaranteed: Buy with confidence, as our premium quality Hi Temp Unions are built to last, and if you're not satisfied with it at any....
Check Stock

Maverick M Remote Smoker Thermometer [ET-73] - Gray

  • 500FT remote monitoring: Unlike with bluetooth meat thermometer limited range of only 100ft.
  • ThermoPro wireless thermometer for cooking provides best in class, reliable connection of up to 500ft to ensure you can monitor from anywhere.
  • Smart alerts & timer: Always stay informed with our smoker thermometer allows you to view temp and timer simultaneously.
  • Once the food temperature reaches your preset temp, bbq thermometer will beep and flash.
  • Accurate dual meat temperature probes: Digital food thermometer features high heat resistant meat probes, measuring temp range from 14℉ to 572℉ with an accuracy 1.8°F/1°C to let you Cook Like a Pro.
  • 8 temp presets and BBQ mode: Kitchen thermometer for food features a HI/LOW temp setting to monitor the ambient temp of your oven/smoker/grill and know exactly when to add more fuel.
  • Large backlit display & simple interface: Large display coupled with a simplistic interface, allows you to operate the device with ease.
  • Probe thermometer for smoker features a unique anti-slip grip to reduce the chance of accidents.
Check Stock

Vintage Tupperware Condiment Pump Dispensers Retro Orange

  • 2.4QT Large Capacity: The cheese dispenser with pump uses a 2.4Qt (2.3L) stainless steel tank, that can hold a large amount of cheese or hot fudge. It features a durable dispenser, so the pump can also dispense melted creams or sauces. Single output: 1/3 ~1 ounce(10-30ml)..
  • Convenient Temp Control: A rotary button for easy adjustment of temperature (30-110℃ / 86-230℉). A 650watt band heating element block is attached to the pump to ensure that the temperature of condiments is optimal. 2 indicator lights directly show the working status. Don't miss a step with our warmer..
  • Details Made Just For You: The top pump can rotate 360 degrees, making it convenient and cleaner for you to operate in any direction. Anti-skip pads ensure smooth operation and our nacho cheese dispenser doesn't need to assemble, saving you lots of effort and time..
  • Wide Application: The premium pump, large tank, and stainless steel material make this nacho cheese machine a must have, it can be used for melting cheese, hot fudge, caramel, etc. Perfect for stores, concession stands, restaurants, snack bars, ice cream shops, and cafeterias..
Check Stock