ReviewsLow level Hardware Abstraction

APC by Schneider Electric Smart-UPS 2200VA LCD RM 2U 120V with Network Card

Universal It enclosure for low to medium density server and networking applications.
Compact width to optimize data center space.
42u height to easily roll through doorways.
Includes: baying hardware, doors, Key(s), keyed-alike doors and side panels, leveling feet, mounting hardware, pre-installed casters, Qty 4 - bolt-down brackets, roof, side panels, unpacking sheet.

This listing contains: (1) NA1600.2 1600 Watt Max 2-Channel Class A/B Amplifier Bridgable (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set.
2 x 400W @ 4 Ohms 2 x 800W @ 2 Ohms 1 x 1600W @ 4 Ohm.
Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz High-Pass Crossover: 60Hz - 1.2kHz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 25 Amp x 2.
Product Dimensions: 7.01" x 2.09" x 10.24" (178 x 53 x 260mm).

REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
Type 303 stainless steel top cap screws with black oxide finish.
BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte....

Original visual communication graphic art created by a professional artist.
Unique artwork abstraction with colors and design techniques used to create this visual composition.
Lightweight, Classic fit, Double-needle sleeve and bottom hem.

REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
Type 303 stainless steel top cap screws with black oxide finish.
Micro-radiused on all machined leading edges to ensure a non-marring design.
BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
Hard Case and T15 and T25 Torx driver bits included.

Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.

Connectivity: This amplifier can accept low- or speaker-level inputs so it'll work in almost any system, and the package includes screw-on RCA-to-bare wire adapters for the speaker-level signal. JBL has also included their electrical anti-rotational locking (E.A.R.L.) ground terminal, for a more conductive and secure ground connection for the amplifier. The Stadium 1000 sub amp will integrate perfectly and look fantastic in a system that uses the matching JBL Stadium 4 four-channel full-range amplifier..
Mono subwoofer amplifier: 700 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms).
Variable low-pass filter (32-320 Hz, 12 dB/octave) / Variable bass boost (0-9 dB at 70 Hz) / Phase switch (0, 180 degrees).
E.A.R.L. ground terminal included / wiring and hardware not included with amplifier / 4-gauge power and ground leads recommended.

REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
Type 303 stainless steel top cap screws with black oxide finish.
Micro-radiused on all machined leading edges to ensure a non-marring design.
BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
Hard Case and T15 and T25 Torx driver bits included.

Original visual communication graphic art created by a professional artist.
Unique artwork abstraction with colors and design techniques used to create this visual composition.
This premium t-shirt is made of lightweight fine jersey fabric.
Fit: Men’s fit runs small, size up for a looser fit. Women’s fit is true to size, order usual size..

REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware.
Type 303 stainless steel top cap screws with black oxide finish.
Micro-radiused on all machined leading edges to ensure a non-marring design.
BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring.
RECOIL LUG: Integral bottom recoil lug for best alignment and a secure zero under the harshest recoil.
DURABLE & ULTRALIGHT: Approximately 4.41 oz. with screws (pair 30mm low).
Made of 7075-T6 aluminum, Mil-Spec, Type III, 30-micron hard anodized matte black finish.
Hard Case and T15 and T25 Torx driver bits included.

One unbalanced aux level output (Phono connector).
Five unbalanced aux level inputs (Phono connectors).
12V phantom power for condenser microphones.
Ideal for the following smaller applications: Meeting rooms, Houses of worship, Broadcast, Educational paging and public address, Sound system rental.
Juke Box Muting and "Paging with Ducking" Functions:. Juke Box Mute feature mutes background audio signal when a connected juke box is active. Paging with Ducking allows the SCM268 to be used as a paging mixer.
Unit fits into a half-rack space and includes all the necessary rack mounting hardware.