ReviewsLow pressure Gas Regulator

Gas One 2106 3 ft Regulator Fire Pit Grill Heater Propane Hose, 3 feet

  • ✓ A TOP QUALITY PROPANE REGULATOR AND HOSE - maxing out at 80, 000 BTU, this 3Ft low pressure propane regulator is fiber reinforced to ensure quality performance. The hose is the perfect fit for a wide variety of grills, fire pit tables, and other propane appliances.
  • ✓ LONG LASTING AND DURABLE - Gas One’s 2106 Low Pressure Propane Regulator provides an air-tight connection for your propane appliances. Made with high quality rubber and brass connections, the 2106 ensures a stable connection and a leak-free experience.
  • ✓ MEASUREMENTS- The 2106 Propane Hose measures at 3ft long (91. 4cm) and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an inside ⅜-inch flare fitting and has an outside diameter of ⅝ inches.
  • ✓ READY FOR US - The low pressure hose is ready to use right out of the box and requires no additional tools to set up. Simply connect the regulator to the tank and appliance when ready to use.
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

MRbrew CGA-320 Keg Regulator, Quick Disconnect CO2 Kegerator Regulator with Pressure Adjustment Knob, Beer Regulator with Safety Manual Pressure Relief Valve, with 2 Swivel Nut & 1/4’’ & 5/16’’ Barbs

  • 【1/4’’ QUICK DISCONNECT】MRbrew thread to barb keg beer regulator comes with 1/4” swivel nut, allows CO2 regulator to be used with 1/4″ and 5/16″ I.D size hoses, threaded setting makes disconnection between regulator and gas hoses a great breeze!.
  • 【EXCELLENT SEALING & ANTI-BACKFLOW】Durable thick nylon washer achieves quad—Ring inlet seal at connection between tank and regulator, perfectly avoids one leakage source, turning off ON/OFF valve avoids back-flow of beer, worry-free operation with MRbrew keg regulator!.
  • 【YOUR SAFETY, THE FIRST!】Integrated sintered bronze mesh inlet gas filter perfectly controls co2 gas flow, manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator!.
  • 【DUAL GAUGE & STABLE PRESSURE】MRbrew upgraded regulator comes with dual pressure gauges, displays pressure clearly, easy to adjust and stabilize to the pressure you want by pressure adjustment knob, a well-built regulator for getting accurate pressure!.
  • 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew keg regulator is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you....
Check Stock

DOZYANT 4 FT 0-30 PSI Adjustable High Pressure Propane Regulator and Hose with Gauge Fits for Grill Burner Turkey Fryer Cooker Firepit Forge and More

  • Output pressure 0~30 PSIG adjustable regulator with outlet gas flow indicator 0~60 PSIG. Hose measures 4 Feet long..
  • 130,000 BTU/hr rating at 30 PSIG pressure. Equipped with Excess Flow Protection. When your propane gas left in your tank too low, or the capacity flow....
  • Adjustable 0-30 PSI high pressure output propane regulator with 4 feet hose is a must have item for your propane burners, stove, turkey fryers,....
  • High quality and excellent sealing quality is promised for your safety. This propane regulator with hose has excess flow protection for your safety....
  • No tools needed, easy and quick attachment for easier installation..
Check Stock

Smelting Pot

  • All In All: The complete set covers all of the basics, includes Furnace, burner, gas hose with regulator, 6KG crucible, fire pad, tongs, PTFE tape, manual, worry-free 12-month warranty, technical support 24 hrs..
  • No Rust At All: Heavy Duty stainless steel 304 furnace body, Anti-rust, corrosion resistance, durable..
  • Reach High Temperatures Quickly: Heavy Duty stainless steel 304 gas burner offers 135,000 BTU output, heat up to 2600°F/1426°C, melt copper wire in 15 minutes..
  • Pro Heat Insulation: Built-in ceramic fiber heat insulation Thickness up to 25mm, Excellent heat insulation effect..
  • Safety: Come with CSA gas hose and 30 psi regulator, professional design for working with America standard Propane Tank directly, Easy to use.(It does not work with BBQ low pressure gas tank fitting).
Check Stock

Nitrogen Regulator with 60' Hose for HVAC Purge, 0-800 PSI Output Pressure, CGA580 Inlet Connection and 1/4'' Male Flare Outlet Connection

  • 【Connection】CGA-580 Inlet Connection fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier.1/4" Male Flare Outlet Connection fits HVAC Charging Hoses for Purging ,Pressure Testing and High-pressure lines..
  • 【Accurate Pressure Gauge】The Nitrogen Gas Regulator has two Easy to read pressure gauge,covered with scratch-resistant plastic protective film and rubber cover.Input: 0-4000PSI.Output: adjustable 0-600PSI.The display show 800PSI that you can rate them at 600PSI, but they are able to go up to 800PSI..
  • 【Durable Construction】Our Nitrogen Regulator is made of solid brass,so the surface can keep good looking in a long time. Precision thread design ensures high sealing performance and avoids gas leakage. You can adjust the nitrogen regulator smoothly and accurately through the T-handle to prevent galling..
  • 【Application】The Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas stored in a tank.It is great for HVAC purging,pressure tests,inertization,leakage tests,and Soldering,like the accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC puring..
  • 【Filter Structure】A filter structure is used at the connection, which can effectively ....
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock

Robertshaw 700-503 Millivolt Gas Valve, 250 To 750 Millivolts

  • Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
  • Natural to lp and lp to natural conversion kits available for standard and slow opening gas valves.
  • Description: 24 vac dual intermittent pilot, slow opening gas valve with 3/4 in. X 3/4 in. Inlet/outlet, standard opening and 3.5 in. Wc pressure regulator setting.
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • 【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....
Check Stock

PatioGem Propane Regulator with Hose 2FT LP Gas Hose 1Psi Propane Regulator with Hose Propane Hose with Regulator Low Pressure LP Gas Regulators fit for BBQ Grill Heater Fire Pits—CSA

  • 【LOW PRESSURE PROPANE REGULATOR-BEST for OUTDOOR COOKING】PatioGem low-pressure propane regulator with hose is your excellent choice for outdoor....
  • 【UNIVERSAL FIT & SEALED CONNECTION】Accurately designed & constructed from 100% solid brass, the Type 1/QCC1 tank connector acts as an easy....
  • 【SECURE CONNECTION with CSA CERTIFICATION】With 3-layer hose structure and constructed from high-quality flame-retardant PVC, PatioGem propane hose....
  • 【CONSISTENT& STABLE GAS FLOW】The outlet pressure of the PatioGem low pressure regulator is at 11” W.C (1/2 PSI). Playing its role beyond your....
  • 【PatioGem’s 1 YEAR WARRANRY & Professional Customer Service 】With ONE-year product warranty and 24hrs/7days non-stop customer support provided....
Check Stock