ReviewsLow temperature Adhesive

Wire Harness Automotive Cloth Tape,Adhesive Wire Loom Harness Tape High Noise Resistance Heat Proof Chemical Fiber Fabric Electrical Tape for Car Automotive Heat Resistant Insulation

☆ High Quality Materials -- Made of Polyester cloth base with strong acrylic pressure sensitive adhesive materials, this automotive high temperature wiring harness tape has strong ability of corrosion resistance, oil resistance, high and low temperature resistance, wear resistance..
☆ High Viscosity & Good Flexibility - High viscosity, no hazardous substances, automotive high temperature tape wiring harness tape has good flexibility, anti-tear. Low temperature is not hard, easy to operate, has excellent stain resistance,aging resistance, also has a certain isolation minus sound effects..
☆ Easy To Operate -- Adhesive high noise resistance heat proof chemical fiber fabric electrical tape is widely used in the area near the engine,battery or on normal wire harness.Hand tear, easy to operate, winding harness, specifically for the automotive industry..
☆ Wide Application -- Ideal for automotive interior parts of the harness use noise reduction, such as the dashboard wire harness and main harness wound.Also can be used in the engine compartment and the passenger compartment harness machine after conversion winding insulation and protection..
☆ Best Choice -- Wire harness automotive cloth tape is designed for bundling and wire protection against abra....

Check Stock

3M 5958FR/BLK055 Scotch 5958FR VHB Tape: 1/2" x 15 ft, Black

3M 5958FR VHB Tape is a flame retardant, very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film release liner. It bonds high, medium and medium/low surface energy substrates and provides handling convenience, cushioning, damping, and impact resistance..
Great for industries like aerospace where flame redundancy is often a requirement. It is part of the 3M 5952 family of VHB products which providing adhesion to the broadest range of substrates, including most powder coated paints..
Carrier/Backing: closed-cell acrylic foam (conformable). Adhesive: modified acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner)..
Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F (minimum)..
Density: 50 pounds per cubic foot. Dynamic Overlap Shear: 100 pounds per square inch. Short Term Temperature Resistance: up to 300F. Standards Met: FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).
Toxicity (Draeger Tube ABD0031, AITM 3.0005. Core: 3-inch diameter..

Check Stock

GSSI Sealants Butyl Tape 1/8

Greater cohesive strength. Superior adhesive strength. Withstands extreme roof temperatures..
Superior low temperature compressibility. Cold flow resistant. Resistant to UV light..
Seal not affected by normal movement of building. Wide service temperature range..

Check Stock

3M TALC Scotch-Weld 08961 Urethane Adhesive DP604NS 48.5mL 12 per case DP604NS Black

Fast-curing adhesive delivers tough, flexible bonds quickly.
Designed for vertical and other applications that require no slumping or sagging of the adhesive bead.
Flexible adhesive that is capable of bonding dissimilar substrates.
Non-Newtonian: (Chemical reaction two-parts).

Check Stock

2Pcs Caulk Strip, 1.5\ x 10.5Ft Self Adhesive Caulking Tape, PVC Adhesive Caulk Sealing Tape for Kitchen Bathtub Shower Toilet

【Fast and easy installation】Single sided self adhesive caulk strip, just press self-adhesive strip to the surface in minutes. No tools, No mess, hassle and waste, easy alternative to regular caulk The clear caulk strip can be applied to any flat and smooth surface. When installed, the best indoor temperature is range of about 25¡æ, if the temperature is too low, you can use hair dryer to heat the adhesive, and then paste in the corner..

Check Stock

3M 425/SI160 Scotch 425 Aluminum Foil Tape: 1" x 60 yd, Silver

...available. This tape is ideal for masking, sealing, seaming, shielding, chemical stripping, harness wrapping, joining, electroplating, plastic protection, chemical milling, heat shielding, heat reflecting and paint stripping..
3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It’s also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking..
The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments..
Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in “white goods” appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in “white goods” appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier....

Check Stock

3M 425/SI260 Scotch 425 Aluminum Foil Tape: 2" x 60 yd, Silver

...available. This tape is ideal for masking, sealing, seaming, shielding, chemical stripping, harness wrapping, joining, electroplating, plastic protection, chemical milling, heat shielding, heat reflecting and paint stripping..
3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It’s also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking..
The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments..
Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in “white goods” appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in “white goods” appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier....

Check Stock

Double Sided Mounting Tape 1”x 32.8 Ft 3M 9448A Double Coated Tissue Tape Strong Adhesive Heavy Duty Transfer DIY Tape White Color for LED Strip Light Office Home Car Décor(9448AB)

...and conversion. The acrylic adhesive on this 0.15 mm double sided tape is tested for substrates including PE and stainless steel. The carrier can provide dimensional stability to foams and, with the PCK liner, makes for easy die cutting and laminating..
HIGH QUALITY: ① Adhesive formulated to hold well even in high temperatures. ② Medium-firm acrylic adhesive system delivers high adhesion to a range of substrates. ③ Non-toxic and environmental. ④ High temperature resistance and waterproof.and durable.⑤ Strong adhesive and easy to removal. ⑥ Powerful ability to bond a variety of surfaces. ⑦ Tissue carrier adds dimensional stability and improves conversions..
RECOMMENDED: Recommended applications for Nameplate bonding，Plastic film lamination/bonding，Foam bonding，Splicing， Lens bonding applications. Logo bonding. Touchpad bracket assembly. Module bonding to PET card. Touch panel bonding. Rubber feet bonding. Low surface energy bonding..
INSTALLATION AND REMOVAL: After application, The bond strength of 3M Laminating Adhesive 9448A increases as a function of time and temperature, and has very high initial adhesion when the adhesive flows onto the surface. Besides the bong strength will build over time. Using a knife to cut an open on bac....

Check Stock

High Temp Tape, FORTSPANG PTFE Coated Fiberglass Teflon Tape, High Temperature Adhesive Tape, Drying Conveyor Belt; Welding Sealing Tape Heat Resistant Up to 300℃ (50mmx10m)

【Material】Teflon tape / PTFE roll with self-adhesive back. Width: 50 mm.
【High quality】Our Teflon tape is pressure-resistant, corrosion-resistant, abrasion-resistant, high-temperature resistant, smooth surface, low-friction. High temperature resistance from -196 ° C to 300° C..
【Widely used】Ideal for a variety of home and commercial projects such as high speed sealing machine, food packaging, hot melt machine, 3D printing, high temperature powder coating, etching etc..
【Easy to use】Simply pull the tape off the roll and place it in the right place. Self-adhesive Teflon tape is easy to apply and remove without leaving any residue..
【Make sure the equipment runs smoothly】Pressure-sensitive silicone adhesive tapes offer excellent drainage properties and non-stick coated surfaces, replace deteriorated or burned-out Teflon tape / PTFE tape so that machines and equipment can run smoothly and efficiently..

Check Stock

POMOCA Climb 2.0 Climbing Skins 100mm, XL

Minimal effort required to separate adhesive sides from each other.
simply wash the adhesive layer to restore tackiness.
Excellent ski base adhesion on multiple ascents.
Excellent tack even at very low temperatures.

Check Stock

3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes

...e bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount..
➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace..
➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem..

Check Stock