ReviewsLow temperature Brazing Alloys

0.2mm x 200mm x 240mm Titanium Plate Ti Titan TC4 Gr5 Plate Sheet Foil

High heat intensity, temperature of several hundred degrees higher than aluminum..
Good corrosion resistance, Titanium work in a humid atmosphere and seawater, the corrosion resistance is far superior to stainless steel.
for pitting, etching, stress resistance particularly strong..
Good low temperature performance titanium alloys at low temperatures and extremely low temperatures, can still maintain its mechanical properties..
Large chemical activity, chemical activity of titanium is large, with atmospheric O, N, H, CO, CO2, etc. have a strong chemical reaction..
Suitable for Aerospace industry, marine industrial machinery, etc..

HIGH TEMPERATURE RATED. Tested to handle up to 2400F (1315C) heat. Asbestos-free, Low Thermal Conductivity, Low Thermal Shrinkage, Strong, High Tensile Strength, Non-Toxic..
SPECIFICATIONS: 1" Thick X 24" X 12". Density 8 lb/ft3. Weight 1.33 lbs..
EXCELLENT HEAT INSULATION. MaxWool ceramic fiber products used for Wooden Stoves, Baffles, Fireplaces, Furnaces, Pellet Stoves, Chimneys, Boilers, Pizza Ovens, Brazing, Soldering, Welding, Foundry, Pottery Kilns, Refractory, Glass Blowing, and more..
EASY TO CUT AND SHAPE. Cut with a sharp knife or heavy scissors.
soft and flexible enough to mold into the shape needed for your installation..
MADE IN USA BY A TRUSTED INDUSTRY LEADER. Nutec has more than 45 years of experience in the manufacturing of high temperature insulation fibers. Its quality thermal solution products are sold in more than 50 countries..

WHY SHOULD I USE A HOT POT 2? The Hot Pot 2 was designed to make lead casting a whole lot easier. It melts lead quickly and can process over 20 pounds per hour. The Hot Pot 2 runs off of electricity.
MELTS LOW-TEMPERATURE ALLOYS – The Hot Pot 2 is capable of melting all low-temperature alloys such as lead, tin, and so many more.
PERFECT FOR SINKERS & BULLETS – The Hot Pot 2 works great for melting lead for sinker and bullet molds. Is has pouring spouts on either side to make it easier to pour into the molds small holes.
EASY TO USE – Designed to be easy to use, the Hot Pot 2 is great for hobbyists. As with any equipment that heats up, always ensure that proper safety precautions are taken and clothing is worn.
MADE IN THE USA – All Hot Pot 2 melting pots are made in the USA using local materials and labor. This is quality that will last a lifetime.

PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.

...ng regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
Enhanced metallicity: The addition of silver will improve the metallic plasticity, increase the strength and strengthen the toughness of the metal in the welded joint. Wettability: The addition of silver will improve the wettability of the welded joint, thus allowing perfect filling of every gap..

15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%.
Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!.
Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006.

MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux.
Formulated for high tensile strength and ductility.

304 Stainless Steel Plates with 99.9+% Copper Brazing.
Low Pressure Drop Economy Beer Wort Chiller.
Recommended Max Water Flow Rate: 18 gpm, Design Temperature: -195°C to +220°C (-319°F to 430°F).

Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.