ReviewsLs To Turbo 35adapter

Billet Black Aluminum Valve Cover Oil Cap w/-10 AN Fitting for LS LSX LS1 LS2 LS3 LS6 LS7

  • Our auction is for LS1/LS6/LS2/LS3/LS7 Billet Black Valve Cover Oil Cap w/ -10 AN Fitting..
  • This valve cover adapter replaces the original oil fill tube on the factory valve cover..
  • It is CNC-machined from billet aluminum for precise fit then anodized black, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter..
  • The top of the adapter is machined to accept a -10 AN hose end to facilitate the installation of a custom crank case evacuation system, PCV system, or for use with a vacuum pump..
  • Designed to fit nearly any LSX engine!It will protects your engine and lets it breathe freely..
Check Stock

Brian Tooley Racing BTR Turbo LS Stage 1 Cam, Spring Kit with Steel Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft and Spring Set)

  • Brian Tooley Turbo Stage I Cam includes Spring Kit and 7.400" Chromoly Pushrods.
  • Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
  • Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Steel Retainers, Spring Locators.
  • .505" ID, .060" Thick, LS Valve Seal Kit.
  • Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
  • When the combination calls for something a little milder, the stage 1 is where to look..
  • It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..
Check Stock

Set of 4 Ignition Coil Packs Fits for Mazda RX-8 RX8 RX 8 1.3L R2 2004 2005 2006 2007 2008 2009 2010 2011 Replaces# UF501

  • Necessary Harness to connect LS2/LS7/Truck coils to factory RX-8 harness.
  • The LS2/LS3 Ignition Coils to RX8 Harness Adapter allows you to use GM LS2/Truck ignition coils on your factory Mazda RX8 wiring harness without....
  • Fits the following ignition coil packs: D581 ( 12558693 ) Truck Coil.
  • D585 ( 10457730 AC Delco )( 19005218 Delphi ) Yukon/Truck Coil.
  • Package Includes: 1pcs Wire Harness Adapter kit as pictures shows..
  • Any questions or installation issues please contact us freely..
Check Stock

WATER PUMP for Ford New Holland Tractors, Boomer, Skid Steer Replaces SBA145016780, SBA145017780,SBA145017790, SBA145017721, SBA145017780, SBA145017730, SBA145016901, CSU80-0012

  • New Water Pump Suitable for Ford New Holland 1720 1925(FROM 01 OCT 1993)1920(FROM 01 JAN 1987 TILL 30 SEP 1993).
  • Fits: New Holland Compact Tractor: 1920(FROM 01 JAN 1987 TILL 30 SEP 1993), 1320, 1520, 1620, 1715, 1720, 1925(FROM 01 OCT 1993), TC30, TC33D, TC33DA, TC35, TC35A, TC35D, TC35DA, TC40, TC40A, TC40D, TC40DA, TC45, TC45A, TC45D, TC45DA, TC48, TC55, T2310, T2320, T2330, T2410, T2420 New Holland Boomer: 2030, 2035, 3040, 3045, 3050, 3415(FROM 01 JAN 1987 TILL 30 SEP 1993), 4055, 4060.
  • New Holland Skid Steer Loader: L140, LS140, L150, LS150, L160,LS160, L170, LS170, L175, L465, LX465, LX485, LX565, LX665 Shibaura Engine : N843-C, N843-H, N844L-C, N844LT-C, N844T, N844.
  • Directly replaces New Holland Part No. SBA145016780, SBA145017780, ,SBA145017790, SBA145017721, SBA145017780, SBA145017730, SBA145016901, CSU80-0012.
Check Stock

Akozon 16pcs C5 Filter Fuel Injection Line Fitting Adapter Kit OE: GF822 10299146 19239926 Fit for LS1 LS2 LS6 LS3 LQ4

  • 【Application】The Fuel Line Kit fits for LS1, LS2, LS6, LS3, LQ4, LQ9, LM7, L99, L76, LSX..
  • 【OE Number】Replacing OE numbers for reference: GF822, 10299146, 19239926. Built to meet standard specification, strictly follow factory quality control..
  • 【Practical Accessories】The Fuel Line Kit includes 1pcs C5 fuel filter, 1pcs high pressure fuel injection hose, 1pcs LS fuel rail adapter 5/16, 2pcs LS fuel rail adapter 3/8, 1pcs LS filter connector 3/8 (Already Installed in the Filter), 2pcs AN6-1/4NPS, 2pcs AN6-45° straight fittings, 6pcs AN6-0° straight fittings..
  • 【High Quality】New and quality Fuel Line Kit, manufactured with the highest quality aluminum + rubber material, high strength for maximum durability, high reliability..
  • 【Simple Installation】Simple and convenient to install, no complicated tools required. If you understand your vehicle perfectly, you can choose to install it yourself..
Check Stock

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

  • High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
  • Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
  • Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
  • Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....
Check Stock

Rexka 30pcs Fender Liner Under Cover Wheelhouse Liner Screw Bolt Compatible with Toyota Lexus 90159-60477

  • Other Names: Mount Bracket Bolt, Wheelhouse Liner Screw, Air Deflector Screw, Deflector Screw, Bumper Cover Bolt, Bumper Cover Screw, Side Shield....
  • Fits: ES300h, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GS430, GS450h, GS460, HS250h, IS F, IS250, IS350, LS430, LS500, LS500h, LX470, RC F, RC300,....
  • Fits Avalon, C-HR, Camry, Corolla, Echo, Highlander, Prius, Prius AWD-e, Prius C, Prius Prime, RAV4.
  • M6.2 x 22mm 18mm Washer Diameter 10mm Hex, Black E-Coat Phillips Hex Head Screw.
Check Stock

Pedro A Bailey Valve Cover Oil Cap Billet Black for AN10 LSX LS1/ LS6 LS2/ LS3 LS7

  • This valve cover oil cap fit for LEXUS LS1/ LS6 LS2/ LS3 LS7..
  • This billet black valve cover cap is made of high quality material and durable in use. It adopts premium material and advanced technology, which having high performance and longer service lives..
  • The prominent advantage of the valve cover cap is easy and simple installation, which convenient for assembly and disassemble..
  • This valve cover adapter replaces the original oil fill tube on the valve cover..
  • It is CNC machined from billet aluminum for precise fit, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter..
Check Stock

Replacement USB PC Charger Data Cable Cord Lead for Panasonic Camera Lumix DMC-ZS25 DMC-TZ35 DMC-G7 ZS40 ZS50 TS30 SZ3 TZ8 TZ11 TZ15 TZ24 by AlyKets

  • USB PC Charger Data Cable/Cord/Lead For Panasonic CAMERA Lumix DMC-ZS25 DMC-TZ35.
  • Compatible with: Lumix DMC-F2, DMC-FH25, DMC-FH4, DMC-FH5, DMC-FH6, DMC-FH7, DMC-FH8, DMC-FP5, DMC-FP7, DMC-FP8, DMC-FS12, DMC-FS14, DMC-FS16,....
  • Compatible with: Panasonic Lumix DMC-FS3, DMC-FS30, DMC-FS33, DMC-FS35, DMC-FS37, DMC-FS40, DMC-FS41, DMC-FS45, DMC-FS5, DMC-FS62, DMC-FS7, DMC-FT20,....
  • Also compatible with: Panasonic Lumix DMC-FX8, DMC-FX80, DMC-FX9, DMC-FX90, DMC-FZ1, DMC-FZ10, DMC-FZ15, DMC-FZ150, DMC-FZ18, DMC-FZ2, DMC-FZ20,....
  • Also compatible with: Panasonic Lumix DMC-L10, DMC-LS1, DMC-LS2, DMC-LS3, DMC-LS6, DMC-LS70, DMC-LS75, DMC-LS80, DMC-LS85, DMC-LX1, DMC-LX2, DMC-LX3,....
Check Stock

BTR Brian Tooley Turbo LS Stage 2 Cam, Spring Kit with Steel Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

  • Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
  • Cast passenger and driver side manifolds.
  • -4AN oil feed kit with adapter plate + Hardened stainless hardware.
Check Stock