ReviewsLs420d080eus

Tektall LS Cast Aluminum Valve Covers with Coil Mounts Compatible with Che-vy Small Block V8 293 325 346 364 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum and it is black anodized. High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably..
  • 【Fitment】 Valve cover mounts to SMALL BLOCK V8 GEN. III/IV (LS BASED) LS1, LS2, LS3, LS6, and LS7 engines.
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration..
  • 【Features】 The cover has an increased height to allow for added valvetrain clearance and features studs for mounting LS coils with 72mm bolt spacing. It also features a baffled stock-style ventilation set-up and finish-matched oil fill cap..
  • 【Notes】 These work with Delco 510C 05-up coils found on the LS2, LS3, LS7 ETC. It also features a baffled stock-style ventilation set-up, mounting hardware, gaskets, and oil fill cap..
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

WILDFLOWER Tools 589818701 Mower & Tractor Muffler, for YT4, YTH Models

  • OEM Quality Muffler, ASM Twin MNTG Bracket.
  • Measures approximately 9.7" x 4.8" x 4.5".
  • Compatible with various Husqvarna models, including: 96041030800, 164T, 184T, 224T, 224TFI, CTH163 T, CTH164 T, CTH164T, CTH184 T, CTH204 T, CTH224 T, CTH224T, CTH224TFI, CTH2642 TRE, GT48 XLS, GT48DXLS, GT48DXLS CARB, GT52XLS LS, GT52XLSI, GT54 LS, GT54CS, GT54LS, GTH24V52 LS, LG2654, LGT24K54, LGTH 22V48, LGTH26V54, TC 139T, TC 238, TC 239T, TC142, TC142T,.
  • YT42 XLS, YT42CS, YT42DXL, YT42DXLS, YT42LS, YT42XLS, YT46LS, YT48 XLS, YT48DXLS, YT48XLS, YT54 LS, YT54LS, YTA20V46, YTA22V46, YTA24V48, YTH184 T, YTH184T, YTH18K46, YTH20K42, YTH224 T, YTH2242 TDRF, YTH2242TDRF, YTH2246 TDR, YTH2246TDR, YTH224TFI, YTH22V42, YTH22V42 LS, YTH23V48, YTH24V48LS, YTH26V54.
  • Contact us if you have any questions about this part or your model.
Check Stock

Original TV BN59-1357A TV Remote Voice Solar Samsung

  • For model numbers: QN50QN90AAFXZA QN55QN90AAFXZA QN65QN90AAFXZA QN75QN90AAFXZA QN85QN90AAFXZA QN65QN900AFXZA QN75QN900AFXZA QN85QN900AFXZA....
  • QN50LS03AAFXZA QN55LS03AAFXZA QN65LS03AAFXZA QN75LS03AAFXZA QN55Q80AAFXZA QN65Q80AAFXZA QN75Q80AAFXZA QN85Q80AAFXZA QN55Q70AAFXZA QN65Q70AAFXZA....
  • QN32LS03TDFXZA QN32Q60AAFXZA QN43LS03ADFXZA QN43Q6DAAFXZA QN50LS03ADFXZA QN50Q6DAAFXZA QN50Q80AAFXZA QN50Q8DAAFXZA QN50QN9DAAFXZA QN55LS03ADFXZA....
  • QN70Q6DAAFXZA QN75LS03ADFXZA QN75Q6DAAFXZA QN75Q7DAAFXZA QN75Q8DAAFXZA QN75QN850AFXZA QN75QN85DAFXZA QN75QN9DAAFXZA QN85Q6DAAFXZA QN85Q7DAAFXZA....
Check Stock

RJSPHH 13702 Rocker Arm Trunnion Upgrade Kit WITH Bolts for GM LS1 LS2 LS6 LS3 4.8 5.3 5.7 6.0

  • Fits LS1 LS2 LS3 LS6 L99, LS4, LS7, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 4.8 5.3 5.7 6.0 6.2 7.0.
  • 16 x Rocker Arm Trunnions, 32 x Rocker Arm Bearings, 32 x Rocker Arm Retaining Rings, 16 x Bolts, 2 x Washers.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications..
  • These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
Check Stock

COMP Cams 1779-16 7 Degree Tool Steel Retainer Set of 16 for 8mm Valve w/ 26926 Springs

  • FITS: for Chevy Camaro Corvette for LS1 for LS2 for LS3 for LQ4 for LS4 for LS6 for L76 for L92 for L99 for LQ9 for L33 for LSA for LS Cam. NOT fit for LS9 cylinder heads..
Check Stock

BOJACK 20 Values 50 Pcs SN74LS and SN74HC Series Low-Power Logic IC Chip Assortment Kit for IC Chip Work

  • Product Features: have the advantages of small size, light weight, long life, high reliability, good performance, and the power consumption is low, so you don't have to worry even if you work for a long time..
  • IC chip contains: SN74LS00N, SN74LS02N, SN74LS04N, SN74LS08N, SN74LS32N, SN74LS47N, SN74LS86N, SN74LS90N, SN74LS138N, SN74LS245N SN74HC00N, SN74HC02N, SN74HC04N, SN74HC08N, SN74HC14N, SN74HC32N, SN74HC138N, SN74HC164N, SN74HC165N, SN74HC595N..
  • There are 2 models for each model, a total of 40, The packaging is sorted accordingly in plastic storage boxes Including 5 pcs DIP14 socket, 5 pcs DIP16 socket..
  • Function: NAND, NOR, Inverter, OR, Decoders/Demultiplexer..
  • Wide Applications: suitable for automotive electronics, medical equipment, security monitoring, household Electrical appliances, student experiments and communication equipment..
Check Stock

RJSPHH Pushrod Set 7.400\ Longx .080\

  • 7.400" One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16).
  • made of 4130 Structural Steel material for premium quality and high performance.
  • Replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
  • Compatible with 99-02 Camaro & Firebird, 10-13 Camaro, 99-13 Corvette, 04-06 Pontiac GTO, 04-07 Cadillac CTS-V, 08-09 Pontiac G8, 00-13 Tahoe/Yukon/Escalade, 03-09 H2 , 01-13 Chevrol Avlanche, 99-13 Silverado & Sierra 4.8L/5.3L/6.0L.
  • High Quality, Long Lasting Finish - Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely..
Check Stock

Glarks 40Pcs 74LSxxx and 74HCxxx Series Low-Power Logic IC Assortment Kit

  • ♛ [What You Get]: This set includes 74LSxxx and 74HCxxx Series Low-Power Logic IC Chip, 74LS-00/25, 74LS-02/25, 74LS-04/25, 74LS-08/25, 74LS-32/25, 74LS-47/25, 74LS-86/25, 74LS-90/25, 74LS-138/25, 74LS-245/18, each for 2pcs. And 74HC-00/25, 74HC-02/25, 74HC-04/25, 74HC-08/25, 74HC-14/25, 74HC-32/25, 74HC-138/25, 74HC-164/25, 74HC-165/25, 74HC-595/25, each for 20pcs. They are placed in a transparent plastic box, easy to transport and storage..
  • ♛ [Small Component]: Our IC chips are small electronic components, small in size, they only take up very little space in the application. And the power consumption is low, can work normally with little consumption..
  • ♛ [High Temperature Resistance]: The IC chips have good high temperature performance and can work normally between -40 to 85 Celsius (-40 to 185 degree). So you don't have to worry about the high temperature after connecting them to the peripheral circuit, or burning out the it after long time use..
  • ♛ [Long Life Service]: ICs are made of high-quality materials, they are very durable, can serve you for a long time. And the safety and reliability are high, so you don't have to worry even if you work for a long time..
  • ♛ [Widely Application]: 74LSxxx and 74HCxxx Series ICs can be used as Bistabilit....
Check Stock

Sealed Power 1404M Camshaft Bearing Set

  • 【Application】for Chevy G/M LS Engine, LS1, LS2,LS3,LS6, LQ9.
  • 【Cam Bearing Installation Tool】This tool is used to remove and install cam bearings. Professsional cam bearing tool for all LS based engines. This tool is a must when installing cam bearings in big block for Chevys..
  • 【Note】This is a must have for the LS engine builder, you can save time and money by installing your own cam bearings..
  • 【Using Our Cam Bearing Installation Tool】You can remove the old cam bearing and install the new cam bearing like a professional. Easy to install, which helps to keep the cam bearing in the correct position.
  • 【Durable】Made of 45# steel ,maximum durability, the total length is 33 inches, and the end is detachable..
Check Stock

MR HELLO LS Valve Spring Compressor Tool Compatible for Chevy LSX LS1 LS2 LS3 LS6 4.8 5.3 5.7 6.0 6.2 Engine 67605

  • Compatible For:LS Valve Spring Compressor Tool fit LS1 LS2 LS3 LS6 Chevy Chevrolet LSX,4.8 5.3 5.7 6.0 6.2L 67605.
  • LS Compressor Tool Made of stronger steel plates and hardware Strength is better than what you can buy at the market..
  • LS Valve Spring Compressor Tool is for 4.8, 5.3, 5.7, 6.0, 6.2L LS Engines..
  • Compatible with Chevrolet,Silverado,Camaro,GTO,Trans am,Corvette,CTSV,Sierra,Tahoe,Suburban,G8,GM Trucks.
  • 24 hours support: If you have any questions, please contact us.
Check Stock