ReviewsLubricant Mold Release Agent

Pack of 2 Cat Paws Shape Epoxy Mold Cute Catie Footprint Resin Casting Silicone Mold, 3.8 x 3.5cm

  • Material: Silicone. Soft, flexible, durable and reusable, easy to get the mold out..
  • Pack of 2 cat paws silicone mold. The finished products are very shiny and clear..
  • Fun DIY craft mold, you can add some resin pigment or filters to make the cat paw more attractive..
  • After your project is fully cured, it will be easy to pop out of the resin mold. You can use soapy water as a mold release agent. Keep stored in a dry dust free area. Stay away from strong acids..
Check Stock

Polytek Pol Ease 2300 Release Agent (1 Can)

  • A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can.
  • Pol-Ease 2300 is an effective release for most Polytek products, but should not be used before pouring or brushing liquid silicone mold rubber.
Check Stock

Polytek Pol Ease 2300 Release Agent (Case of 12 cans)

  • A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can.
  • Pol-Ease 2300 is an effective release for most Polytek products, but should not be used before pouring or brushing liquid silicone mold rubber.
Check Stock

Accumetric 02583CL10 Boss 820 Pool & Spa Silicone Lubricant - 5.3 oz

  • Boss 820 Pool and Spa Lube is a silicon dioxide thickened,high molecular weight dimethyl polysiloxane-based material. It is a stiff, tacky dielectric....
  • Excellent release agent and lubricant for rubber and plastic parts such as O-rings, valves or plastic gears.
Check Stock

Quest Specialty Micro-Dry PTFE Dry Lubricant & Release Agent, 10 oz. can, 1 Count

  • The low odor, colorless formula is non-oily but slicker than silicone and graphite.
  • Excellent anti-stick properties for an effective release on die casts and injection molds.
  • Excellent for use on hinges, gears, metal extrusions, axles, pulleys, bushings, munitions, locks and catches, synthetic filters, machine parts, cord, twine or rope, chains, paper, glass, leather and elastomers.
  • use as a release agent on conveyor belts, chutes and skids, industrial blenders, bins and spray booths.
Check Stock

CRC Food Grade Silicone Lubricant, 15 fl oz Non-Aerosol Spray Can, Clear/White,3039

  • NSF H1 registered for incidental food contact.
  • Meets FDA regulation 21 CFR 178.3570 for incidental food contact.
  • Wide effective temperature range -40 to 400 degrees F.
  • Excellent release agent and lubricant for all surfaces.
Check Stock

Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass

  • 8" Ingot Mold Mould is equipped with a wooden handle, which is safer to use..
  • 8" iron Ingot Mold Mould, more durable than graphite crucible..
  • There are three iron blocks, you can easily adjust the capacity of Ingot Mold Mould..
  • You can apply release agent or some oil before use, so that it can be released easily..
  • If our products have any problem, pease sontact us,we promise to help you within 24hrs..
Check Stock

Veneer Stone Rubber Molds for Concrete, Retaining Wall Block 10', Recycled Material

  • Create your own custom color retaining wall blocks and save money.
  • No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds.
  • Each mold creates 2 retaining wall blocks for walls, gardens, planters, etc..
  • Made in the USA from plastisol rubber, including recycled plastisol.
  • Production quality molds can be used hundreds of times.
Check Stock

Mold Release | Stoner E236 Urethane Release (Case of 12 Aerosol Cans)

  • PARTALL Hi-Temp Wax is a premium multi-release mold release agent formulated from a blend of hydrocarbon and micro-crystal-line waxes and fortified with PTFE polymer.
  • It is particularly recommended for use with epoxies or phenolics or as part of mold-ing processes that cure and/or catalyze at higher temperatures (150 - 350 °F (65 - 177 °C)) when casting composites parts or molds from plugs..
  • may be used with most thermoset resins at ambient or elevated temperature cure, and is especially useful in applications where standard silicone waxes hinder post-finishing operations.
  • PARTALL Hi-Temp Wax has a creamy texture that makes for ease of application..
  • Use PARTALL Film #10 or PARTALL Coverall Film in conjunction with PARTALL Hi-Temp Wax to initialize new or reconditioned polyester or vinylester molds, or on molds that are particularly intricate or too expensive to risk demolding problems..
Check Stock

Veneer Stone Rubber Molds for Concrete, Retaining Wall Block 11.5', Recycled Material

  • Create your own custom color retaining wall blocks and save money.
  • No release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds.
  • Each mold creates 2 retaining wall blocks for walls, gardens, planters, etc..
  • Made in the USA from plastisol rubber, including recycled plastisol.
  • Production quality molds can be used hundreds of times.
Check Stock

Resin Keychain Molds Silicone molds for epoxy Resin Casting Key Ring Bracelet Bangle Mold Kits for Women Large Circle Handbag Handles Rings Molds DIY Art Crafts Jewelry Making

  • It can be used as Resin, Cabochon, Polymer Clay,Gum Paste, Pmc, Wax, Candle, Soap Mold.
  • Finish product inner diameter: 4 sizes: 2.12", 2.28",2.36" 2.44".
  • Cleaning: Wipe with alcohol or direct water to wash and clean..
  • Use: With silicone mold release agent is more durable..
  • Package included: 4 size silicone bracelet mold.
Check Stock