ReviewsM12 Thread Repair

Compression Tester Automotive - 8PCS Engine Cylinder Pressure Gauge for Petrol Gas Engine Automotive Tool Gauge for Car & Truck

...1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm. Pressure gauge diameter: 75mm, four thread size: M10 x 1.0mm, M12 x 1.25mm, M14 x 1.25mm, M18 x 1.5mm. M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
【100% SATISFACTION】: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..

Check Stock

WASTOREEL 12mm x 1.25 HSS Metric Right Hand Thread Tap and Die Set M12 x 1.25mm Pitch

MODEL: M12 x 1.25 Metric Tap and Die set, Material: HSS.
ROUND THREAD DIE: Not easily broken tooth chip fast, abrasion resistance and long service life..
THREAD TAP: debris rapidly discharged in the tank. No blocking, fast efficiency and high efficiency..
CHARACTERISTICS: Heat treated and tempered for file hard threads and a long, useful life..
PACKAGE INCLUDES: 2pc M12 x 1.25 Metric TAP & 1pc M12 x 1.25 Metric DIE.

Check Stock

Dorman 610-558 9/16-18 Serrated Wheel Stud - .65 In. Knurl, 2.5 In. Length Compatible with Select Dodge / Ram Models, 10 Pack

COMPATIBLE WITH Toyota Tacoma Models Equipped with M12 x 1.5 Factory Studs..
CONTENTS: (12x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Front or Rear fitment. Two sets need to be purchased to replace studs on all 4 wheels. Please verify fitment compatibility prior to ordering..
BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..

Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..

Check Stock

Supreme Suspensions - Extended Wheel Studs Kit for Toyota, Scion and Lexus IS300 with M12X1.5 Studs 3/4\ Longer Than Stock Wheel Studs (24PC PRO Kit)

COMPATIBLE WITH TOYOTA, SCION and LEXUS IS300 Models Equipped with M12 x 1.5 Factory Studs. *Does NOT Fit 2007+ Toyota Tundra..
CONTENTS: (24x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Please verify fitment compatibility prior to ordering..
BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..

Check Stock

M12 x 1.25 Metric 12MM High Speed Steel LEFT HAND Plug Tap 4FL LH

12 mm x 1.25 mm 4FL high speed steel LEFT HAND high speed steel plug tap.
Package Included: 1 piece of M12 x 1.25 Plug Tap.

Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

3 types of universal socket wrenchs cover various situations of oxygen sensor location.
Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..

Check Stock

uxcell M4 x 60mm 304 Stainless Steel Fully Threaded Rod Bar Studs Hardware 10 Pcs

【DIAMETER】The diameter of the rods is industrial 15mm standard.
【INNER THREAD】M12 inner thread on each end of a rod, so that you can 1) use M12 threaded connector (SMALLRIG 900) to lengthen the rod 2) use M12....
【COMPATIBILITY】Mainly used on camera riser system and filmmaking accessories, such as matte box, follow focus, lens support, etc..
【HIGH QUALITY】Made of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable.

Check Stock

Lens Board OV5647 Sensor for Raspberry Pi Camera, Arducam Adjustable and Interchangeable Lens M12 Module, Focus and Angle Enhancement for Raspberry Pi 4/3/3 B+

... is slightly larger(36cm) than the official Raspberry Pi Camera V2 so it does not fit some cases for Raspberry Pi, but it’s natively compatible with the commands and scripts.
2. It works with Pi Zero, but you will need to buy an extra cable. 3. Be gentle while changing the lens and holders or you might damage the thread, but it’s easily fixable with a new m12 holder.

Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

【32pcs Tap and Die Set】The package includes 28pcs (each size including 1x taper tap, 1x second tap, 1x plug tap and 1x die): M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75.
1 x Tap Wrench, 1 x Die Stock Wrench, 1 x Thread Pitch Guage, 1 x Screwdriver, to cover all your needs..
【Product Function】Tap and die set in metric is perfect for rethreading fasteners, fastener holes for auto and machinery repair. Threading tool with storage case, can greatly increase your productivity and act as an important part to your work..
【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you ....

Check Stock

Spark Plug, 2Pcs Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5

【Brand New】100% brand new high quality spark plug repair tool, strictly full tested to ensure the best quality before shipment, safe to use..
【Great for】The spark plug tool is a good tool for repairing damaged spark plug installation threads..
【High Quality】The spark plug tap tools are made of quenched carbon steel,these accessories have strong strength and long durability..
【Practical】The sizes of tap tools are M10 * 1.0 / M12 * 1.25, M14 * 1.5 / M18 * 1.5..
【Easy to Use】Re-thread tool is easy to use and operate. Let's have a try..

Check Stock