ReviewsM18x2 Pipe Tap

Water Connector Universal Tap to Garden Hose Pipe Connector Mixer Kitchen Tap Adapter Faucet Hose Connector for Indoor Outdoor

  • Suitable for a maximum width of 34mm and a tap height of 35mm..
  • Designed to fit a wide variety of indoor kitchen tap..
  • Provided with one washers to fit a variety of taps..
  • Indoor Kitchen Mixer Tap Hose Pipe Connector.
Check Stock

Ruiwaer 1/2 inch NPT Thread Forming Taps Round Shank with Square End

  • The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness..
  • Size of square end of product: 0.55 x 0.55 inch..
  • 1/2'' NPT pipe joint is mainly used for cleaning and thread chasing..
  • The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints..
  • The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing..
Check Stock

IRWIN Tap Set, Taper Pipe, 6-Piece (1921ZR)

  • Tap sizes: 1/4"-18 NPT, 3/8"-18 NPT, and 1/2"-14 NPT.
  • Die sizes: 1/4"-18 NPT, 3/8"-18 NPT, and 1/2"-14 NPT.
  • Precision ground heat treated alloy steel.
Check Stock

QWORK 1/2\ - 14 NPT Pipe Tap, Carbon Steel, for Clean and Re-thread Damaged or Jam Pipe Threads

  • Characteristics:QWORK 1/2"-14 NPT Pipe Tap is an ideal choice for pipe fittings..
  • Size: 1/2" size with 14 NPT (National Pipe Taper)..
  • Usage: Used to cut internal threads of pipes..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

1 - 11 BSPP Right hand Pipe Tap

  • 1" - 11 HSS British Standard Pipe Parallel right hand thread tap.
  • 1" is nominal pipe size - the actual thread major diameter is 33.249mm.
Check Stock

3/8 - 19 BSPP Right hand Pipe Tap

  • 3/8" - 19 HSS British Standard Pipe Parallel right hand thread tap.
  • 3/8" is nominal pipe size - the actual thread major diameter is 16.662mm.
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Check Stock

General Tools 715 Tap and Drill Reference Table

  • DOUBLE SIDED TOOL: This guide features a Tap Drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths.
  • FRONT SIDE: Front side has a machine screw size tap drill chart for recommended 75% depth thread..
  • BACK SIDE: Features a decimal equivalents table in 64ths from 1/64" to 63/64"..
  • WORKS WITH: National Fine, National Course, American Standard Pipe and metric threads..
  • ESSENTIAL TOOL: Essential tap drill and decimal equivalents reference table for toolmakers, machinists and mechanics..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Rain Bird DRIPPAILQ Drip Irrigation Repair and Expansion Kit

  • 【15m 9/12mm tube】 stable water pressure, efficient irrigation system. The 15m 9 / 12mm water pipe thick and long enough, to effectively maintain the water pressure, to solves the problem of low pressure. Water all your plants at one time with 15m + 20m irrigation tubing which made from high quality and UV resistant..
  • 【with elastic clamp】use for firm connectors，we gift about 50 elastic clamp, the connectors tees is fixed with threads and snap. Water pipes will inevitably aging for a long time, spring clamps can prevent the leakage of water pipes after aging, less worry about water leakage and trouble..
  • 【make full use】the end of the first-level water pipe uses an adapter instead of a plug to make full use of the water pipe and reduce more problems.comes with 10 misting nozzles +20 adjustable dripper. ***NOTICE: 12mm= 1/2" OD, 8mm=3/8" IND, therefore, please use 3/8" water pipes for expansion. Our products are actually a complete set..
  • 【Arbitrarily expand】This system allows you to increase or decrease the quantity according to your needs, is a good helper for home irrigation garden. this kit includes 2 types of tap connectors, and the two size tube and connectors, at the end are dripper, sprinkler and snap. With a threaded tap connection ....
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Renovators Supply Manufacturing Antique Brass Outdoor Garden Faucet Dragon Design Spigot Spout Tap with Decorative Wall Flange Solid Brass Backyard Bibcock Fine Detailed Dragon 5.5\ L X 4\ H

  • DURABLE MATERIAL - This beautiful indoor/outdoor spigot faucet is constructed of solid brass. Our exclusive Antique brass finish protects the tap from tarnish and weather elements for many years to come. Consists of an easy Swivel Turn Lever Handle..
  • ANTIQUE DESIGN - Attractive and detailed Dragon shaped backyard faucet is crafted to instantly impart an ambience of power, strength and nobility. Dragons are believed to bring good luck in East Asian culture. It comes with a decorative wall flange..
  • WORKS WITH - A 3/4 Inches ID Male Hose x 1/2 Inches Female Pipe (not included) to use with a standard hose. This outdoor tap measures - Overall Height = 4 Inches, Backplate diameter = 1.9 Inches and Projection = 5.5 Inches..
  • EASY INSTALLATION - Involves a super easy hassle free wall mount installation. The ornate vintage style wall flange covers the area around pipe hiding all the damage, scratches or imperfections. Recommended with Quick Connect Garden Hose or Adapter..
  • BUY WITH CONFIDENCE - This outdoor tap curb appeal is carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock