ReviewsM5 m20 Tap Set

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

[What You Will Have] Set of 6 metric tap drill bit set M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately.
[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency.
[Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
[Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please c....

Check Stock

QISF Adjustable Silver T-Handle Ratchet Tap Holder Wrench with 5pcs M3-M8 3mm-8mm Machine Screw Thread Metric Plug T-shaped Tap

Chromium-plated finish for the highest durability.
Size of screw thread taps : M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25.
Easily switched from left to right handed operation, or locked for non-ratcheting use.
T-Handle Ratcheting Tap Wrenches Three position gear box for quick, efficient ratcheting action Designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank.
Package included: 1-Piece Adjustable T-Handle Ratchet Tap Holder Wrench + 5Pcs Taps(1Pcs M3.

Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

[What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
[Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
[Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.

Check Stock

3D Printer Accessories Screw Kit. Hex Socket Head Cap Screw & Tap Tool Set for 3D Printing Models, M3-M5 Size，High Strength Black Carbon Steel. for 3D Printer Upgrade, DIY Projects, and Handcraft

【Common Sizes and Precise Fit】Screw size: M3(L=8mm,12mm,20mm,30mm), M4(L=8mm,16mm,25mm), M5(L=10mm,20mm,35mm).
【Premium Materia】These screws are made of high-quality carbon steel. Its strength is enough for most fastening and not easy to get slipped..
【Screws and Tools】This kit includes the often used screws and nuts set + M3-M5 Tap set+ Two handy Hex Key wrench for M3 and M4 screws, which helps you with your projects comfortably and effectively..
【Careful Package】each set of screws is packed individually to prevent them from mixing up during the delivery and accidental falling..
【Wide Applications】3D printing projects: part assembly, upgrade, DIY parts. Woodworks, Handcraft, and more..

Check Stock

Highking Tool 114pcs Oil Pan Drain Sump Plug Key Thread Repair Tool Kit Set Drain Plug with Carry Case

114 PCS are ideal for repairing sump, gearbox and differential drain plug threads..
Compatible Vehicle: For Audi, VW, BMW, Citroen, Fiat, Ford, Seat, Honda, Mazda, Mitsubishi, Opel, Peugeot, Renault, Toyota and Volvo.
This Set Includes: 6 x TAPS: M13 x 1.25P / M13 x 1.5P / M15 x 1.5P / M17 x 1.5P / M20 x 1.5P / M22 x 1.5P.
36 x Oil Drain Plugs: M13 x 1.25 (x6), M13....
Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.
This kit provides new enlarged thread and replacement drain plug screws.

Check Stock

uxcell Thread Milling Threading Tap 7/16\-20 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

Tap Size: M20 x 2.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

Copper Washers, 280pcs 12 Sizes Automotive Motorcycle Assorted Solid Copper Crush Washers Flat Brass Round Seal Flat Rings Kit with Storage Box Assortment Kit Set Assorted SAE

【High-quality copper】Solid copper has high conductivity, heat resistant and high voltage resistance. Ideal for sump plugs, water, fuel and hydraulic fittings..
【Application】Copper washers are perfect used for electrical connections, such as household, commercial appliances, automotive, marine, generators, machinery and plant..
【Function】Flat washers can spread a load, and prevent damage to the surface being fixed, and insulate steel screws from surface. Reduce friction, prevent loosening or dispersing pressure..
【Size and quantity】Copper washer set contain 280Pcs/12 Sizes（M5 M6 M8 M10 M12 M14 M16 M20）of the most commonly used copper washers..
【USAGE】The washer is a thin disk-shaped plate with a hole in the middle that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, wear pad, pre-load indicating device, locking device, and to reduce vibration.

Check Stock

Sunxenze 8pcs Metric Thread Machine Taps Set, Hand Screw Thread Plug Taps M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''

Specifications: M3×0.5, M4×0.7, M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.75 that you can use for tapping various threads..
Material: high speed steel 4241/ bearing steel, suitable for soft metal, such as aluminum plate, iron plate. High speed steel 6542, suitable for ordinary stainless steel and other hard materials..
Standard thread distance design, clear and tidy, no burr..
One set including 8 tools：M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Wrench 1/16-1/2''..
These machine hand taps are used for machining nuts or other common thread on the machine..

Check Stock

Walton 10253 1/4\

LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.

Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

...ABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..

Check Stock