ReviewsMachiing Center

4 Inch Marking Center Finder Stainless Steel Center Scriber Marking Centerline Tool Woodworking Center Gauge Line Scriber Center Finder Ruler for Woodworker Carpenter

  • Use tip: it is recommended to use this center finder in conjunction with a 2B pencil, which is very suitable for determining the precise center of the....
  • Size detail: the steel scribe tool is measured about 5.7 x 0.2 x 0.07 inch, small and compact design is very suitable for finding the center of the....
  • Material: the center finder tool is made of stainless steel, which is sturdy, reliable, labor-saving, with high measurement accuracy, easy to operate,....
  • Designed for woodworking: woodworking center gauge slides very smoothly and protects your working fingers from burrs, suitable for woodworking work.
  • Apply to: the center marking tool can be applied to mark the center of a board whose thickness or width does not exceed 4 inch.
Check Stock

Stainless Steel Center Finding Ruler. Ideal for Woodworking, Metal Work, Construction and Around The Home (24\ Ruler)

  • When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time..
  • The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see..
  • To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler..
  • The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from “0” in the middle of the ruler, the scale is in 32nds..
  • The ruler may also be used as a standard type ruler with the 16th scale on the bottom side. This makes the center finder ruler even more versatile. The Center Finding Ruler is available in 12” and 24” sizes, which are both sold separately..
Check Stock

LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock

  • ✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
  • ✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
  • ✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
  • ✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

POWERTEC 71421 10' Round Center Finder Compass (Tool) for Wood Turning Lathe Work – Clear Acrylic

  • INCLUDES: (1) Circle Center Finder Tool (10 inches).
  • FUNCTION: A quick and easy solution to finding the center of irregular shapes, drawing circles and perfect for laying out wood for bowls, platters, trays and more.
  • FEATURES: Marks circles up to 10 inches in 1/2 inch increments with 18 accurately cut 1/8”diameter holes, and 1 center disc hole.
  • EASY TO USE: Simply tap a small nail or pin through the center hole, insert a pencil in your choice of diameter hole, and pivot around the center point to make your circle mark.
  • PREMIUM DESIGN: Made from clear acrylic, these center finder woodworking tools possess a truly transparent profile and contain sharply laid out markings and visual aids along the disc.
Check Stock

300mm /11.8inch Round Center Finder Compass for Wood Turners Lathe Work Clear Acrylic Drawing Circles Diameter

  • This center finder is perfect for laying out bowls, trays and platters.
  • Finding the center of irregular shapes to optimize yield is simple and easy.
  • Made from clear, fully transparent acrylic with a center hole and clearly marked circles in 5mm increments.
  • The circle center finder tool helps produce maximum yield on logs smaller than 300mm in diameter.
  • The lathe center finder works on wood, poster board, plastic, metal, glass, composites and more! Center Finder Compass is perfect for wood turners, arts,crafts, school projects, rough and finish carpenters or use it anywhere you need to draw a circle.
Check Stock

BCDshop Center Finder Woodworking Precision Marking Gauge Scribers Rockler Centre Offset Marking Tool Fits Standard Wooden Pencils Woodwork Measuring Tool Blue

  • Used to determine the exact position of the center of the board during board cutting, pin joints, assembly, etc..
  • The center scriber is made of ABS plastic and is environmentally friendly and durable..
  • The multi-function scribe can mark the center of the sheet with a thickness of 64mm..
  • You can move the scribe to draw a 1/16" 3/16" 5/16" 7/16" 1/8" 1/4" 3/8" 1/2" edge..
  • Marking Center Finder, Woodworking Precision Marking Gauge Scribers,Woodworking Center Scribe Marking Center Gauge, Woodworking Drilling Positioner....
Check Stock

Mini Center Finder With 1/4 Diameter X 7/8 Long Shank

  • Finally! A round stock center finder that fits Our Line of Micro Mark Precision Drill Presses..
  • Special Indicator Locates Drill Chucks Exactly On Center.
  • Never drill off-center holes again...use our Center Finder to quickly and easily position your drill press chuck directly above the exact center of a....
  • And this smaller version of our 3/8” shank finder is 50% smaller in length so it makes small length drill bits able to reach the object to be....
Check Stock

Rockler Hardwood Center Mount Drawer Slides - Wooden Drawer Track Features Classic “T” Shaped Design – Center Mount Slide Made of Hardwood - Drawer Center Track Fits the Slide Guides

  • Center Mount Drawer Slides: Got old or broken dresser drawers? The Rockler wood track slide center is the perfect replacement solution. Our wood....
  • Deluxe Center Drawer Slide: Our wood center track is made from hardwood, kiln-dried birch or maple & fits the wooden drawer Slides Guides #28357 (Sold....
  • Features: This drawer track wooden slide features the classic "T" shaped design and cabinet drawer tracks can easily be cut down from its original....
  • Easy Installation: The center drawer track was created with easy installation in mind. The center guide track can even be cut to meet your needs (made....
  • Optional Slide Guides Available (#29892): Along with our wood drawer slides center mount, we offer separate self-lubricating plastic glides which keep....
Check Stock

Sweet Pea Linens Red Romance Print Charger-Center Round Placemat

  • Sold as an Individual Charger-Center Round Placemat..
  • Measures: Center Round-Charger placemat measures approximately 13 inches in diameter..
  • Content: 100% Cotton outer, with 100% Polyester fill. Care: Machine Washable. Dry Flat..
  • Red Tonal Leaf and Floral Charger Center Round. Same tonal floral on the front and back. Background is white..
  • Reversible design. Center Rounds work great as an accent in the center of either a round or rectangle table or they can be used as a charger on any table..
Check Stock

MT2 Live Center, 0.0002' High Accuracy 60 Degree Lathe Center with 18mm Shank Diameter for Lathe Wood Metal Turning Tool

  • [Specifications] This MT2 60 degree live center, its runout is 0.0002", the cone shank is 18mm, its hardness is 55-60 hrc.
  • Long-Term Practical: Features excellent dustproof and liquid proof seal while the rolling live center has long service life..
  • Making Material: The rolling lathe live center is made of high quality metal, this rolling lathe live center has high hardness and is durable in use..
  • Working Performance: The rolling lathe live center is professional manufacturing for good working performance..
  • Scope of Application: The rolling lathe live center is suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

  • LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
  • NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
  • You will appreciate not having to mark the center on each blank.
  • EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
  • There is no need to change the setup again to center and drill multiple pen blanks.
  • USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
  • VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.
Check Stock