ReviewsMachine Tool Sleeve

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

Check Stock

Crimping Tool, Wire Rope Crimping Tool, Up To 2.2mm Swager Crimper Fishing Wire Crimping Tool with 100 PCS Aluminum Double Barrel Ferrule Crimping Loop Sleeves Kit with Cutting Function for Cable

【Premium Quality】- The wire crimping tool was made of heavy-duty stainless steel, which is corrosion and rust resistance. 4 positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm, It can easily crimp copper/aluminum sleeve and more from 50-450 lb test line..
【Special-Purpose】- Cable crimper tool With non-slip grips and self-locking. The safety lock is an easy way to keep your crimper closed when you don't use it. And the mechanism design makes it more relaxing to provide optimum pressure..
【Wide Application】- Crimping tool kit comes with 2 hardened steel side cutters, which can help you cut the wire without frays and the strong spring opens the cutters instead by your hands. Coordinate with aluminum double-barrel ferrule crimping loop sleeve can be widely used for wire rope..
【Package Included】- High precision wire rope crimping tool with a 100Pcs Aluminum double-barrel ferrule crimping loop sleeve kit..
【Pay Attention to】- ❶ The crimping tool can only be crimped to aluminum sleeves of 3/32" and below. ❷ The cutting section can only cut wire ropes 1/16" and below..

Check Stock

MAOPINER Universal Electric Drill Press Stand Tool Drill Stand Bench Clamp Drill Press Stand for Hand Drill Workstation Repair Tool Clamp

Application: Use this drill press stand for electric drills with collar diameter 38-43mm (1.7"or 1.5"), with a black plastic ring for a better fix..
Material of this Electric Drill Press Stand: Aluminum alloy base + solid column bar.
Drill Depth: up to 60mm(2.4"), single hole mount..
This universal bench clamp support tool is designed for use with power drills with collar diameter of 38mm or 43mm, can drill depth up to 60mm, comes with 2 holes for mounting.
Designed with slots on the iron base for installing machine vise, make it more convenient to operate, ergonomic rubber handle of the workbench repaur tool clamp is anti-slip and easy to grab.
The package includes 1 x Base, 1 x Column bar, 1 x Rocker, 1 x Lower limit Fixed sleeve, 2 x Adjustable plastic fixed sleeves, 1 x Hex wrench 5mm.

Check Stock

Mophorn 100Ft x 3/8Inch Drain Cleaner Machine fit 1 Inch (25mm) to 4 Inch(100mm) Pipes 370W Drain Cleaning Machine Portable Electric Drain Auger with Cutters Drain Auger Cleaner Plumbing Tool

...s, which can easily go through multiple crooked pipes to clear away the blockages. Moreover, you are allowed to change the cable movement’s direction to stretch it out or shrink it back just by turning the control handle..
Professional Tool for Drain Cleaning: Ideal for 1″-4″/25-100 mm pipe. This drain cleaner machine enjoys a good reputation for its robust performance. It is capable of carrying out heavy work and can clean long sections of sewers. Widely used in sinks, toilets, and floor drains. Once you own this machine, you can clean the pipes by yourself, rather than paying several hundred bucks to call in a plumber..
Air-Activated Foot Control: Motor Power: 370W.
Motor Speed: 1700 RPM. Equipped with an air-activated foot switch, this sewer machine helps you control the cable with fewer efforts, making the cleaning process cleaner and more effective. Unlike cleaning pipes with powder, our sewer snake does not harm the surroundings. Thus, it tends to be a perfect choice for long-term use..
Four Shapes of Cutters: Prepare to be dazzled by 4 different shapes of cutters: Arrow Cutter, Spade Cutter, C-Cutter, Boring Bulb Cutter. The quick-change design makes the cutters easily connected or disconnected. Multiple attachments contribute a lot to clea....

Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
Fit for the newest Cummins seal and sleeve perfectly.
Remove and install front crankshaft seal easily and without damage.
Made of high quality steel and black finish.

Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

... Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.
[HIGH Performance】-Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um.
Min resolution of digital display angle :0.0001/pulse, Linear Scale/Magnetic scale Interface: DB9(TTL/EIA-422-A).
【Wide Application】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement,.
【Special Function】1:Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..

Check Stock

VEVOR Drain Cleaner Machine 100ftx1/2in Electric Drain Auger 550W Sewer Snake Drill Machine fit 1 Inch 25mm to 4 Inch 100mm Pipes w/Wheels Cutters Foot Switch for Drain Cleaners Plumbers

...ughness, which can easily go through multiple crooked pipes to clear away the blockages. Moreover, you are allowed to change the cable movement's direction to stretch it out or shrink it back just by turning the control handle..
Professional Tool for Drain Cleaning: Ideal for 1"-4"/25-100 mm pipe. This drain cleaner machine enjoys a good reputation for its robust performance. It is capable of carrying out heavy work and can clean long sections of sewers. Widely used in sinks, toilets, and floor drains. Once you own this machine, you can clean the pipes by yourself, rather than paying several hundred bucks to call in a plumber..
Air-Activated Foot Control: Motor Power: 550W.
Motor Speed: 1700 RPM. Equipped with an air-activated foot switch, this sewer machine helps you control the cable with fewer efforts, making the cleaning process cleaner and more effective. Unlike cleaning pipes with powder, our sewer snake does not harm the surroundings. Thus, it tends to be a perfect choice for long-term use..
Four Shapes of Cutters: Prepare to be dazzled by 4 different shapes of cutters: Arrow Cutter, Spade Cutter, C-Cutter, Boring Bulb Cutter. The quick-change design makes the cutters easily connected or disconnected. Multiple attachments contribute a lot to clea....

Check Stock

LASCO 13-2708 Compression Sleeve Puller for 1/2-Inch (5/8 OD) Copper Pipe

Compression Sleeve Puller pulls the nut and compression sleeve off of the copper pipes.
Saves time and effort when replacing old angle stops.

Check Stock

Mophorn 100FT x 3/8Inch Drain Cleaner Machine fit 1 Inch (25mm) to 4 Inch(100mm) Pipes 370W Open Drain Cleaning Machine Portable Electric Drain Auger with Cutters Glove Drain Auger Cleaner Sewer Snake

...s, which can easily go through multiple crooked pipes to clear away the blockages. Moreover, you are allowed to change the cable movement’s direction to stretch it out or shrink it back just by turning the control handle..
Professional Tool for Drain Cleaning: Ideal for 1″-4″/25-100 mm pipe. This drain cleaner machine enjoys a good reputation for its robust performance. It is capable of carrying out heavy work and can clean long sections of sewers. Widely used in sinks, toilets, and floor drains. Once you own this machine, you can clean the pipes by yourself, rather than paying several hundred bucks to call in a plumber..
Air-Activated Foot Control: Motor Power: 370W.
Motor Speed: 1700 RPM. Equipped with an air-activated foot switch, this sewer machine helps you control the cable with fewer efforts, making the cleaning process cleaner and more effective. Unlike cleaning pipes with powder, our sewer snake does not harm the surroundings. Thus, it tends to be a perfect choice for long-term use..
Four Shapes of Cutters: Prepare to be dazzled by 4 different shapes of cutters: Arrow Cutter, Spade Cutter, C-Cutter, Boring Bulb Cutter. The quick-change design makes the cutters easily connected or disconnected. Multiple attachments contribute a lot to clea....

Check Stock

Seatek Roto-Flex Roto-Split RF-120A Giant Armored Cable Cutter, 0.75-1.125 in, 7-1/4 in L

Ultra-Grip Wire Stripper Technology: Our stripping machine improved with ultra-grip wire feeder technology. This technology massively increases torque, reduces slippage and straightens mangled wires to get them through the drill-powered wire stripper tool. It will untangle mangled wires effortlessly without any slips or jams. This unique cable stripper is an industrial grade automatic wire stripper for all your scrap wire..
Portable Wire Stripper: You can bring this wire stripper machine where all the scrap wires and cables need to be stripped. The tool is lightweight, portable, and can easily fit in a bag or at the back of your truck or car for easy transport and storage. This wire stripping machine won't require a lot of space to strip all the copper wire you have. This drill-powered wire stripping machine is manufactured in North America and uses top-grade materials.
Drill-Powered Wire Stripping: Got a hand drill at home? Pair it with the StripMeister original wire stripping machine and you've got a powerful tool that will go through various types of wires, from 18 gauge wire to 250 MCM, including ROMEX and braided (stranded) wire. This wire stripper is your partner for practical and economical wire recycling..

Check Stock