ReviewsMachining Shaft

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Straight-type handle body for holding small drilling, milling tools..
You can reduce the use of longer tools, which can reduce costs and improve efficiency..
Stable diameter, other parts have been accurate ground to eliminate imbalance..
Mainly used for various types of drilling and milling machine, spindle Morse taper machine..

Check Stock

24 Pieces Aluminum Dart Shafts Dart Shafts for Steel Tip Soft Tip Dart Accessories 1.97 Inches Hard Metal Dart Stems with Rubber O Rings Darts Sharpener for Sports Outdoor Dart Flight (Black, Silver)

Sturdy Material for Long Time Use: these aluminum dart shafts are made of quality aluminum, with precision machining process, not easy to break and bend, lightweight and stable, sturdy and serviceable, nice to fit different kinds of darts, also very suitable for both steel tips or soft tips.
Shaft Lock Hole Design for Safe Use: these dart shafts for steel tip are designed with lock hole, allowing you to fix the shaft to the dart barrel with levers, without worrying about the shaft falling off during use, also making you safe in the process of use.
Portable Size for Easy Carry: these dart shafts are about 50 mm/ 1.97 inches in length in total, about 45 mm/ 1.77 inches without thread in length, lightweight and portable, easy to carry and store when you are not using them, without taking up much space.
Complete Accessories: the dart stems are equipped with rubber O rings, which can fix the dart rod firmly, making the flight path more stable and smooth.
And the round dart sharpener is nice to remove the metal burrs, making the tips round and keeping the darts pointed.
Sufficient Quantity: the package comes with 24 pieces of shafts for darts, equipped with 40 pieces of O rings, and 1 piece dart sharpener, enough quantity and complete combination can meet your....

Check Stock

Lovejoy Size D12B Universal Joint, 1\ Round Bore and 1\ Round Bore, 1/4\ x 1/8\ Keyway with Setscrew, 2.00\ Outer Diameter, 5.44\ Overall Length

Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 1,750 RPM.
Compensates for angular misalignments and shaft separation.
Bored hubs fit onto shafts without the need for machining.
Operating temperatures range from -30 to 212 degrees F.

Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

Machining Range: precision machining, rough machining, plane processing and step processing..
High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
Made of cemented carbide, which has high hardness with good impact resistance..
New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..

Check Stock

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..

Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..

Check Stock

Lovejoy Size D12B Universal Joint, Stainless Steel 303, 1\ Standard Bore and 1\ Standard Bore, No Keyway, No Setscrew, 2.00\ Outer Diameter, 5.44\ Overall Length

Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 1,750 RPM.
Compensates for angular misalignments and shaft separation.
AISI 303 stainless steel for corrosive environments and where sanitation requirements are a factor.
Bored hubs fit onto shafts without the need for machining.
Operating temperatures range from -30 to 212 degrees F.

Check Stock

WEDO Stainless Steel Slotted Screwdriver, Flat-Head Screwdriver, Corrosion Resistant, Rust Proof, Ergonomic Soft Grip TPR Handle, 5mm Head, 4\ Blade Length

...great shock resistance. Overall heat treatment adds extra strength and durability to it. Its nickel and chrome plating brings rust and corrosion resistance..
ERGONOMIC NON-SLIP TPR HANDLE: Made with quality thermoplastic rubber (TPR), the handle provides a secure and comfortable grip..
PRECISE FIT: Adopting precision machining, the flat blade provides an exact fit in fasteners. The slotted screwdriver from WEDO is designed for screws with all kinds of Specification..
ENVIRONMENTALLY FRIENDLY: WEDO Stainless Steel Slotted Screwdriver are environmentally friendly, surface without chrome or any other plating. This kind of tools are corrosion-resistant, high-strength, not easy to break or rust, and have good ductility and toughness. WEDO Stainless Steel Slotted Screwdriver can be used in harsh environment (including antacid or alkali environment).
SERVICE: WEDO TOOLS has been highly praised by our new and old customers because of our user-friendly design concept, continuous improvement of excellent quality and after-sales services. WEDO Stainless Steel Slotted Screwdriver have been exported to more than 106 countries and regions. To enhance customers’ satisfaction, we set up service centers in Germany, Russia, South Korea, Singapore, Canada, the United Sta....

Check Stock

Simple Woodturning Tools 3 Carbide Wood Turning Tools with Rougher Finisher Detailer & 12 Color Coded Solid Aluminum Lathe Tool Handles USA Made

These high quality carbide turning tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
Easy tool selection with color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8" outside diameter by 12"....
Carbide turning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is easy....
Designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9"..
Greatly simplifies woodturning with no need for any sharpening equipment..

Check Stock

Target Darts Adrian Lewis 18G Black Edition 90% Tungsten Soft Tip Darts Set, (210182)

Player endorsed and used by top PDC player Adrian 'Jackpot' Lewis - Designed to Adrian’s definitive requirements in 2022 - Soft Tip 18 Gram Weight.
Precision Milled Barrel Design - (51mm Barrel Length, 6.1mm Barrel Diameter) The 90% tungsten barrel features a combination of CNC mills and radial grooves throughout which is overlaid with black PVD coating. The barrel contrast is created by re-machining and layering a vibrant blue finish within the grooves.
Adrian Lewis Gen 1 Dart Sets - These darts have great balance and design with the range featuring in 3 different weights for every dart player.
Stylish Design - The dart is completed with a black Pro Grip shaft and Adrian Lewis black Signature flight.
Pack Contains - 3 x Dart Barrels, 3 x Black Pro Grip Short Shafts, 3 x No.2 Adrian Lewis Black Edition Designed Flights, 3 x Black Pixel Points.

Check Stock

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.

Check Stock