ReviewsMachining Sleeve

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

• ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
• Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
• ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
• ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
• ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

• Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
• The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
• For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
• The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

• Machining: Copper And Aluminum Medium Finish Machining.
• Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

• 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
• 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
• 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
• 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
• 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..

1-3/32 High Speed Steel Expansion Reamer Straight Flute Taper Shank

Drill America Bridge (Construction) Reamer 1-1/8\ Magnetic Hex Shank Bridge Reamer

Drill America Bridge (Construction) Reamer 1-1/16\ Extra Long Magnetic

Mako Universal Picatinny Rail Mount Fits Most Pistols

• Easy to install, additional machining may be required for some models.
• Accepts all sights designed to fit a standard Picatinny rail.
• Easy to install.Additional Machining May Be Required For Some Models.

Amerock BP8704-ORB Double Demountable Hinge 1/2-Inch Overlay, Oil Rubbed Bronze (10)

• Single Demountable, 1/4" Overlay, Sold as a pair.

MRELC Universal Motorcycle 7/8 22mm Handlebar Brake Master Cylinder Clutch Lever CNC Left & Right Set Compatible with Harley Honda Kawasaki Suzuki Yamaha（ Piston Diameter 12.7mm Blue

• 【Compatible With】:Universal Motorcycle 7/8" 22mm Brake Master Cylinder Clutch Lever,uitable for most Chinese motorcycles. (Compatible with Eg Harley Honda Kawasaki Suzuki Yamaha).
• 【Reasonable design】： Adjustable design, clear between each gear, not easy to slip. The pivot design allows the lever to fold outward to prevent bending or breaking in the event of a collision..
• 【Material】：6061-T6 Aluminum Alloy， corrosion-resistant alloy, high hardness (up to HV90 degrees), good oxidation effect. There are no trachoma pores, and the flatness is better..
• 【Processing technology】: Aluminum Alloy Lever Body + CNC pump.CNC machining process，stable machining quality, high machining accuracy,100% Brand New..
• 【Package includes】: 1* Left pump + 1* Right pump +1*brake light switches).

ISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC

• Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
• Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
• ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
• Grade or Coating Type: Uncoated / Coating Layers: Uncoated.