ReviewsMag Gas Shielded Welder

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

TIG Welding Torch WP17FV Flexible 13 Feet Air Cooled with 10-25/35-50 Plug Valve 0.04 -1/8 Tungsten Electrodes TIG Welder Adapter for High Frequency/Lift TIG Welder

  • [Plug Size] WP17V flexible comes with quick fitting connector 10-25 and 35-50 plug(can be replaced as needed), air cooled with valve.
  • 0.02" to 3/32" tungsten electrode available.
  • [Flexible TIG Torch] Torch head can be adjusted to any angle as you want.
  • V-style torch knob to control gas on/off for quick and convenient control of shielding gas.
  • [Applicable Models] Can work with Reboot RBM-1300/RMB-1600/RBM-2100D/RBM-1550D as those welders support a LIFT TIG mode.Also the RBT-200PD/ACDC high frequency tig welder..
  • [How to use Lift Tig?] Connect to negative on the mig or stick welder with the quick fitting connector(correct your plug),blue cable for gas connection and leave the 2pins socket along,plug the ground clamp to positive.
  • [Standard Length] 13 Feet ,M16*1.5 & Two-pin socket,please check your tig welder before orders.
Check Stock

Eastwood Mig Welder Consumables Kit Contact Tip Set Torch Gun & Gas Nozzles in Plastic Storage Case

  • Kit Includes A Complete Set Of Consumables For Your Eastwood Mig135 Or Mig175 Welder Or Any Other Mig Welder With A Tweco-Style Torch..
  • With 20 Contact Tips (Ten 0.023 in./0.6 Mm And Ten 0.030 in./0.8 Mm).
Check Stock

display4top Portable No Gas MIG 130 Plus Welder Flux Core Wire Automatic Feed Welding Machine,DIY Home Welder w/Free Mask - 110V

  • ★Flux-Cored Wire, Gas Less Welder - Display4top MIG 130 welder machine uses convenient Flux-Cored Wire.Automatic Thermal Safety Protection,suit for welding carbon steel,aluminum,stainless steel etc..
  • ★Strong & Durable - Compact and exquisite MIG welder, made of heavy duty stainless steel body, painted with durable red paints, ensure its long-last serving life-span, a strong and durable welding machine for your long term use..
  • ★Overload Safety Protecyion - MIG 130 PLUS welder come with a safety feature where the welder is automatically turned off when it it too hot or the volt and current exceed their range. This function will keep you and your welder safe. Internal fan-cooling system,there are fans helping to cooling the welder when working..
  • ★Wide Applications - Portable design light weight, easy for translation and storage. Comes with a comfortable hand grip, making it easy for you to carry anywhere you want.It is perfect for home DIY and general repairing work..
  • ★Accessories Included - 1x welding gun with on/off safety contro,1 x grounding clamp,1x brush , 1x protection mask and several other small accessories.
Check Stock

Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire

  • 【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
  • 【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
  • 【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
  • 【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
  • 【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..
Check Stock

LDHTHOPI MIG Welder 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder.

  • 【Easy Control Panel & 3 In 1】LDHTHOPI MIG welder machine has combo MIG (Gas/Gasless) MMA TIG welding mode. The welding machine has included with....
  • 【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-140A. Duty....
  • 【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The....
  • 【Compact and Portable】:The LDHTHOPI Welder Machine is true compact design. Lightweight machine body only weighs 10 lbs. And with a comfortable....
  • 【Accessories Included】The LDHTHOPI MIG Welder package includes all welding equipment you need: 1 MIG welding torch with 2m cable.
Check Stock

FORZA FEYER MIG 140 Welder Portable Flux Core Wire Automatic Feed 140 Welder Welding Machine w/Free Mask ARC 110V with Welding Gun,Work Clamp Input Power Adapter Cable and Brush Orange

  • Powerful Capable:0.8-1.0mm flux core wire. Dedicated 110 AC, 60 Hz.Up to 140 Amp output that allows you to weld mild steel, weld steel, stainless....
  • Control Mode:MIG 140 welder has Synergic Adjustment Function, no need to match working voltage and feeder speed seperately,easy to operate. 1-110V....
  • Portable & SAFE :This 140 welder features a easy carrying handle,compact design, Heavy duty stainless steel machine with Electric choke control, less....
  • WELDING PROCESS:The 140 welder working principle of Synergic Co2 gas shield Mig welder is to rectify AC input current to direct current, and then use....
  • Wide Application:The welder has a adjustable wire feed speed and welding current, easy to start arc, allow weld raw steel, white steel, staircase,....
Check Stock

MIG TIG WELDING CART

  • Includes two shelves below the welder for extra storage, two safety chains for securing gas cylinder.
  • Tilted top shelf for easier access to welder controls.
Check Stock

Klutch 2-Tier Welding Cart with Locking Cabinet - 31 1/2in.L x 16 1/8in.W x 28in.H

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

MIG Welder ，MYYWELD Welding Machine 160A 3 in 1 MMA/MIG/LIFT TIG Welder Machine with IGBT Inverter，Flux Core Welder Gas/Gasless Welding Wire Dia 0.8-1.0 mm 2lbs Welding Wire Stick Welder 220V

  • 1.EASY TO USE-This welder is a perfect entry level dual digital display easy to read and set. Besides, the welder machine uses 0.8mm.or 1.0mm flux....
  • 2.BROADLY APPLIED- Our stick welder is a wide range of uses-suitable for basic DIY such as household welding, hanger, covering, guardrail, Repair,....
  • 3.IGBT TECHNOLOGY -Using IGBT inverter technology gives a more stable performance than traditional welder. It has the following advantages--stable....
  • 4. MULTIPLE WELDING-MIG/lift TIG/stick/MMA welding machine,gas/gasless modes all are available. Can be used for welding kinds of metals. Meeting....
  • 5. THE PACKAGE INCLUDS -1 MIG-160Welder Machine, 1 welding holder, 1 ground clamp ,1 welding torch, 2 hose clamps , 2lbs welding wire, 1 transparent....
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock