ReviewsMagikflame Insert

1/4-20 Threaded Insert for Wood Hex Drive Threaded Wood Inserts 1/4 Wood Nuts 40 Pieces

  • 1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws..
  • Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm..
  • Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided..
  • In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place..
  • In very Harder wood such as white oak or maple, drill a hole size (3/8.
Check Stock

Carbon Fiber Full Shoe Arthritic Insert 26 cm Men's Size 9 or Women's Size 10 Made in The USA

  • MAXIMUM STIFFENING INSERT WITH TRACE/MINIMAL FLEXIBILITY Carbon Fiber Insert SOLD AS A SINGLE PIECE, NOT AS A PAIR.
  • HARD, FLAT CARBON FIBER INSERT can be used in EITHER RIGHT OR LEFT SHOE BY SIMPLY TURNING PRODUCT OVER.
  •  helps with pain with daily activities with mid-foot arthritis, advanced hallux rigidus post-op care of foot and toe surgeries, or other conditions requiring minimal movement of the foot.
  • Not recommended for athletes to compete in.
  • INSERT MUST BE PLACED DIRECTLY UNDER THE REMOVABLE SHOE INSOLE OR UNDER ORTHOTIC.
  • Our inserts are prescribed by sports orthopedic surgeons, sports medicine physicians, podiatrists, chiropractors, athletic trainers, and physical therapists.
  • Used by used by professional, college, high school, and recreational athletes, as well as active people such as hikers, walkers, and laborers.
  • FOR PROPER FIT CARBON FIBER INSERT MUST not be longer than your foot, measure foot standing.
  • If in between sizes or half sizes round down to smaller size.
  • If necessary, measure in inches and use the ruler in the images to determine the appropriate size in centimeters.
  • to fit the stiff carbon fiber in the shoe, the insert should be ¼ - ½ inch (approximately 1 cm) SHORTER than removable soft insert in shoe.
Check Stock

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
  • IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Slow Feeder Dog Bowls Insert: Slow Feeder Silicone Insert - Sprial Food Bowl Insert with Strong Suction Cup for Small Medium Large Dog Elevated or Basic Dish, Helpful to Slow Down Eating

  • 23 strong suctions: Our slow feed dog bowl insert has 23 strong suction cups at the bottom, which is much more than other products on the market, which can be firmly fixed to the bottom of the dog bowl without adding water. Note: The suction cup base is only suitable for flat surfaces and cannot be rotated..
  • Spiral Slow Food Bowl Insert: Our slow feeding dog bowl insert consists of 6 pieces of food-grade silicone spiral pieces, the silicone texture is soft and elastic to avoid scratching your pet's mouth and tongue. Reminder: dog silicone slow feeder insert is not a chew toy, if your pet is an aggressive chewer, please supervise your pet when using it..
  • Promote slow food to improve digestion - Our dog bowl insert can help dogs effectively slow down their eating speed and prevent a series of problems such as swallowing, bloating, obesity, choking, and vomiting caused by feeding too fast. Slow down bowl insert suitable for wet dog food, dry dog food, and dog treats..
  • Special design, wide applicability: The end of this dog slows feeder insert has several cutting marks, you can cut it according to your dog food bowl size. With humanized design, the dog bowl slow eating insert is compatible with stainless steel, Ceramic, glass, and many other sizes and diffe....
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Love Is Infinite Potential (417hz)

  • Accent your home with Hofdeco His and Her Gray Love Is All You Need Infinite Love pillow covers and make yourself the envy of the neighborhood. Made from HEAVY Weight Cotton Linen fabric, this decorative pillow cover is comfortable, and crafted for durability with fine detail which provides beautiful color definition while also being the perfect complement to your couch!.
  • Details: Front side printed, blank back side.
  • Notice: Package includes 2 pieces of pillow cover. Pillow inserts or forms are Not included.
  • Please be aware that color of blank parts and back side of pillow cover is Light Beige, Not pure white. This is the color of natural cotton linen fabric..
  • For the suitable pillow insert, please search "Pillow Insert".
  • Pillow insert should be 1" or 2" larger than your sham for attractive firm and fluffy look. 20"x20" pillow insert is suit for 18"x18" pillow cover, 22"x22" pillow insert is suit for 20"x20" pillow cover, 13"x21" pillow insert is suit for 12"x20" pillow cover.
Check Stock

JessEm 02314 Rout-R-Lift II Router Lift for Rigid Brand Router Motor 29302

  • The JessEm 02314 Rout-R-Lift II router lift is compatible with Rigid brand router motor 29302..
  • Features a 9-1/4" x 11-3/4" Phenolic insert plate..
  • Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts..
  • Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench..
  • Additional insert rings available separately..
Check Stock