ReviewsMagnaflow Catalytic Converter

MagnaFlow Universal Catalytic Converter HM Grade Federal/EPA Compliant 99205HM - Stainless Steel 2.25in Inlet/Outlet Diameter 13in Overall Length No O2 Sensor - HM Replacement

  • EPA OBDII COMPLIANT - This catalytic converter is designed to meet or exceed Federal EPA (Environmental Protection Agency) OBDII emissions....
  • KEEP THE CHECK ENGINE LIGHT OFF - This MagnaFlow HM Grade catalytic converter has been engineered to satisfy the vehicle computer control monitoring....
  • STAINLESS-STEEL CONSTRUCTION - The utilization of highly corrosion resistant stainless-steel construction, free-flowing mandrel bent pipes and....
  • 5 YEAR / 50,000-MILE LIMITED WARRANTY - Worry-free ownership is made possible thanks to the 5 year/50,000-mile construction and 25,000-mile emissions....
  • UNIVERSAL FIT - MagnaFlow recommends professional installation for the universal configuration of this catalytic converter as cutting, fabrication....
Check Stock

48V 60V 72V to 12V 50A Buck Converter 600W Step Down DC to DC Converter Transformer Reducer for Golf CART Scooters & Bicycles

  • FEDERAL/EPA COMPLIANT - Extensive testing and certification processes are followed to guarantee that 99205HM meets emissions standards set by the Federal EPA..
  • UNIVERSAL INSTALLATION - Universal catalytic converters allow you to place it in the exact location and orientation required for your vehicle. Professional installation is highly recommended..
  • CLAMSHELL DESIGN - Durable stainless-steel construction and integrated OEM-like O2 ports guarantee optimal catalytic converter performance and reliability. The clamshell design features a continuous seam weld that ensures superior thermal insulation..
  • HM GRADE - Catalytic converter 99205HM is built to HM Grade standards, meaning that it contains extra catalysts to further improve the conversion of unwanted emissions..
  • 5 YEAR / 50,000-MILE LIMITED WARRANTY - Worry-free ownership is made possible thanks to the 5 year/50,000-mile construction and emissions warranty included with this MagnaFlow catalytic converter.
Check Stock

MagnaFlow Universal Catalytic Converter OEM Grade Federal/EPA Compliant 51356 - Stainless Steel 2.5in Inlet/Outlet Diameter, 15in Overall Length, Midbed O2 Sensor - OEM Replacement

  • FEDERAL/EPA COMPLIANT - Extensive testing and certification processes are followed to guarantee that 99205HM meets emissions standards set by the Federal EPA..
  • UNIVERSAL INSTALLATION - Universal catalytic converters allow you to place it in the exact location and orientation required for your vehicle. Professional installation is highly recommended..
  • CLAMSHELL DESIGN - Durable stainless-steel construction and integrated OEM-like O2 ports guarantee optimal catalytic converter performance and reliability. The clamshell design features a continuous seam weld that ensures superior thermal insulation..
  • HM GRADE - Catalytic converter 99205HM is built to HM Grade standards, meaning that it contains extra catalysts to further improve the conversion of unwanted emissions..
  • 5 YEAR / 50,000-MILE LIMITED WARRANTY - Worry-free ownership is made possible thanks to the 5 year/50,000-mile construction and emissions warranty included with this MagnaFlow catalytic converter.
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 16638

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
Check Stock

J2 Engineering J2-CBE-DS-034 Stainless Steel Cat Back Exhaust System [Compatible with 09-13 Infiniti G37 Sedan 4-Door]

  • MODERATE SOUND/STREET SERIES – Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2008-2013 Infiniti G37 and 2014-2015 Q60.
  • CAT-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the ex....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 15658 - Street Series, Stainless Steel 2.5in Main Piping, Quad Split Rear Exit, Polished Finish 3.5in Exhaust Tip - Corvette Performance Exhaust Kit

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. This exhaust kit is specifically designed for the 1986-1991 Chevrolet Corvette.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit AND outperform the original equipment.
  • STAINLESS STEEL CONSTRUCTION - Highly corrosion resistant, stainless steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifetime of your vehicle.
  • LIMITED LIFETIME CONSTRUCTION WARRANTY - Performance that ....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 19421 - Street Series, Stainless Steel 3in Main Piping, Single Passenger Side Rear Exit, Polished Finish 4in Exhaust Tip - Titan Performance Exhaust Kit

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2007-2021 Nissan Titan.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel constructi....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15715 - Designed for the 1990-1997 Mazda Miata - 2.25in Main Piping, Single Straight Passenger Rear Exit, Polished 4in Exhaust Tip

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 1990-1997 Mazda Miata.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifeti....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Overland Series Kit 19538 - Designed for the 1996-2002 Toyota 4Runner - 2.5in Main Piping, Single Passenger Side Rear Exit, Satin Finish Dual Mufflers

  • MODERATE SOUND/OVERLAND SERIES - Overland Series performance exhausts are designed to add MagnaFlow's signature deep tone and dyno-proven performance to your overlanding rig. The weight optimized exhaust system’s mandrel bent tubing and single, straight-through muffler are designed to fit higher up in the undercarriage than the stock exhaust configuration to ensure improved ground clearance and utility. Specifically designed for the 1996-2002 Toyota 4Runner.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the ex....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System 16518 - Street Series, Stainless Steel 3in Main Piping, Single Passenger Side Rear Exit, Polished Finish 4in Exhaust Tip - F-150/Mark LT Exhaust Kit

  • MODERATE SOUND/STREET SERIES – Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2004-2010 Ford F-150 and 2006-2008 Lincoln Mark LT.
  • CAT-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15712 - Designed for the 2001-2005 Honda Civic - 2.25in Main Piping, Single Straight Passenger Side Rear Exit, Polished 4in Exhaust Tip

  • MODERATE SOUND/STREET SERIES – Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2001-2005 Honda Civic, L4 1.7L engine.
  • CAT-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhau....
Check Stock