ReviewsMagnet Winding

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0157' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 1.0 lb(1300 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 1.0 pounds(1300 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

B&C 21SW152-8 21-Inch 8 Ohm Neodymium Subwoofer, Black

  • 4000 W continuous program power capacity153 mm (6 in) split winding copper voice coil30 - 1000 Hz response96 dB sensitivity60 mm peak-to-peak excursion before damage.
  • Neodymium magnet allows a very high force factor and linear excursion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power.
  • compression Aluminum demodulating ring for very low distortion.
Check Stock

DC Moter, DC12V Adjustable Speed DC Motor 180W Permanent Magnet DC Motor 2000RPM with Bracket (DC 12V 2000RPM)

  • [Excellent performance]: Permanent magnet DC motor drive is super stable, low noise, safe to use and stable in operation..
  • [Optional specifications]: Permanent magnet DC motors are available in two specifications, the rated voltage is optional 12/24 (V), with a high speed of 3500/6000rpm and a larger torque..
  • [Support CW / CCW rotation]: This high-speed DC motor can support CW / CCW rotation, and the speed is adjustable..
  • [Hollow shaft design]: The DC motor adopts a hollow shaft design. The fishing line can pass through the hollow shaft, which is very suitable for floating fish..
  • [Wide application]: This DC motor can be widely used in lawn mowers, polishers, cutting machines, electric drills, cotton candy machines, small generators, winding machines, bag cutting machines.
Check Stock

Youxmoto Reversing Solenoid Switch/Relay Winch Motor, 12V 6 Terminal Reverse Polarity Solenoid DC Contactor, 24450 214-1211A11 214-1231-A11 2141211A1106 214-1211A11-06

  • 【FITMENT】: Reversing Solenoid Relay Switch For Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors & More!.
  • 【REFERENCE PART NUMBER】: 24450BX, 214-1211A11, 214-1231-A11, 2141211A51, 2141211A61, 214-1211A11-06..
  • 【Note】: This Reversing solenoid is only for permanent magnet motors, It is used to reverse polarity on Permanent Magnet winch motors with 2 terminal posts. Not suitable for old style motors with copper winding field..
  • 【6 Terminal Continuous】: 4X - 5/16"-24 threaded studs, 2X - 1/4" male blade terminals..
  • 【75 amps for 5 minutes】: Allow 5 minute cool down time after pushing solenoid to the maximum limit. 12 Volt, 150 surge amps..
Check Stock

MTBs Engage E-Boats : 10 June 1944

  • The kit includes 48V1500 DC motor with MTX Sun Ringle bicycle rim(no tire), 35A max controller, throttle, brake lever, UKC1 TFT display and 7 speed gear. No battery included!.
  • Top speed: 57-58km/h(35mile/h) goes with 26inch wheel.
  • Big torque, 45N./M, good ability to climb the hills.
  • Motor: 180 copper winding+ best quality magnet, hub width: 135mm for rear Wheel.
  • MTX Sun Ringle Bicycle RIm, rim width: 38.9mm..
  • UKC1 TFT display with 3.5” high contrast color screen shows battery power level, time, speed, mileage, gear, input power. Components error checking and report.
  • Pedal Assistance System (PAS)to let you enjoy cycling while driving electric bike..
Check Stock

Bare Copper Wire, Bright, 20 AWG,0.032\ Diameter, 328' Length

  • [Professional Maintenance]: This copper wire is a copper wire coated with a very thin insulating layer which is a professional maintenance for transformers, motors, and other precision motherboards.
  • [Direct Welding without Scraping Paint]: This soldering copper wire is easy to use and can be used directly without rubbing the isolation layer, which effectively improves the use efficiency.
  • [Sufficient Length]: There are 5 enameled magnet wires, each of which is about 15 meters long and can be used for a long time.
  • [Convenient Storage]: This winding wire copper includes a black storage ring on which the copper wire is wound for storage and use.
  • [High Conductivity Copper]: This copper coil is made of high conductivity copper, which has a good effect.
Check Stock

Jensen MOD12-70 70W 12\ Replacement Speaker 8 Ohm

  • 8 ohm impedance 70W rated power 140W musical power 97.5 dB sensitivity @ 1W, 1m Ferrite magnet Copper voice coil winding Epotex voice coil former Paper cone Integrated paper surround Non-treated cloth dust dome Pressed sheet steel basket.
  • Jensen Mods are a series of Jensen musical instrument speakers developed to give a contemporary feel with a touch of the old British sound.
  • The Jensen Mod Series speakers are designed for precision amplifiers which require a speaker that complements the signal without changing the signatures of the amp itself.
  • This combination of transparent sound with a touch of English makes the Jensen Mods perfect for any amplifier.
Check Stock

600W Permanent Magnet Generator 12V 24V 48V Dynamo 3 Phase Gearless Electric Generator Free Energy AC Alternator Use For Water Wind Turbine 48V With Base

  • 1. Gearless, low start up torque and low RPM.
  • 2. Installed by human design, easy installation, maintenance and repair..
  • 3. Using a new set of ring power output devices, to overcome the traditional generator when the cable winding..
  • 4. Permanent magnet generator rotor using patented alternator, together with the special stator design, effectively reduce the generation of....
Check Stock

SA-6.5 CS v3 - Sundown Audio 6.5' 125W RMS Component S

  • Power Handling: 200 Watts RMS | 1.5" Coil with 1" winding length | Thick 10mm Extended Top Plate | Hyper-Extended Pole piece with integrated cooling channels | Full height magnet ID shorting ring for reduced inductive distortion | Fully stitched surround | Flat tied-on high-current tinsel leads.
  • T/S Parameters D2: Fms: 48.9 Hz | Res: 45.5 Ohm | Re: 4 Ohm | Qms: 4.82 | Qes: 0.50 | Qts: 0.46 | Rms: 4.8 kg/s | Cms: 0.14 mm/N | Mms: 74.8 gr.
  • Nref: 0.09 % | Bl: 13.5 N/A | SPL: 81.6 dB | VAS: 4.1 L | Rp: 31 Ohm | Lp: 24.7 mH | Cp: 829.8 uF | Le: 1.69 mH.
  • Enclosure Specifications: 0.25cuft - 0.35cuft ported (NET) per woofer | Port area 4sqin per woofer | Mounting Depth: 3.79".
Check Stock

12/24V 30W Permanent Magnet Motor Hollow Shaft DC Motor Electric Brushed Motor Speed Adjustable CW/CCW (12V 3000RPM)

  • [Hollow shaft design]:It is a hollow shaft DC motor, the fishing line can pass through the hollow shaft, perfect for making fish float..
  • [Safe to use]:This high speed motor drives super smooth, low noise, safe to use..
  • [High performance]:This permanent magnet DC motor can support CW/CCW rotation, features high speed of 3000/6000rpm and large moment of force..
  • [Application]:Can be applied in lawn mower, polishing machine, cutting machine, electric drill, cotton candy machine, small generator, winding machine, bag cutting machine..
  • [Energy saving]:Low heat and low loss, save energy..
Check Stock