ReviewsMagnet Wire Capacitor

Pair Rockville 6.5' Component Car Speakers w/Kevlar Cones+Silk Dome Neo Tweeters

  • ...h Accordion Suspension. Linear Progressive Conex Spider. Acrylic Bullet Phase Plug High SPL Design. High Tinsel Expanded Steel Basket. Super Slim Design facilitates Door Installations. Oversize 1.5 High Temperature CCAR Voice Coil. 60 oz Magnet Structure Weight. Includes Wire Mesh Grill. Prewired with Bass Blocking Capacitor. Frequency Response: 125Hz-10KHz.
  • Sensitivity: 100dB @ 1w/1m. Impedance: 4 Ohms (8 ohm also available. Shallow Mounting Depth. Mounting Depth: 2.2. Cutout diameter: 5.63". Mounting diameter: 6.14". Mounting hole diameter: 4 holes- 0.197" x 0.276". TS Parameters: FMS: 173.2 Hz. QMS: 8.60. QES: 0.83. QTS: 0.76. RES: 12.2 Ohm. RMS: 1.6 kg/s. CMS: 0.07 mm/N. MMS: 12.9 gr. NREF: 0.70 %. BL: 6.4. SPL: 100 dB. VAS: 1.6 I. RE: 3.4 Ohm.
  • RP: 7.1 Ohm. LP: 2.7 mH. GP: 436.5 uF. LE: 0.3 mH. Features: Rockville RT6 Silk Dome Neo Swivel Tweeters. 1 Swivel Silk Dome Tweeters. Complete Pair with Flush, Surface, and Angle Mount Hardware. Neodymium Magnet. Ferro-Fluid Cooled Voice Coil. High Temperature ABS Housing. In-Line Crossover Network. s: Power Handling Per Pair: 240 Watts Peak / 60 Watts RMS.
  • Power Handling Per Tweeter: 120 Watts Peak / 30 Watts RMS. Impedance: 4 Ohm. Cutout Diameter: 2.00. Mounting Depth: 0.75. Frequency Response: 1.3KHz - 24....
Check Stock

Rockville RFC30F 30 Farad Capacitor Blue Voltage Display

  • Rockville RFC30F 30 farad capacitor Blue voltage display + built in distribution block.
  • SR (equivalent Series resistance): 0.015 ohm @ 120Hz, 25°c.
  • 30 farad digital Hybrid capacitor with Blue illumination.
  • Blue illuminated window with light following played music.
Check Stock

3.25\ Car Audio Speaker Tweeter - 300 Watt High Power Aluminum Bullet Horn with 1 Inch Super Titanium Tweeters, 2 kHz - 25 kHz Frequency, 96 dB, 4 Ohm, Heavy Duty 30 oz. Magnet - Pyramid TW18 (Pair)

  • 300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this tweeter with 3.25" aluminum bullet horn w/1 inch super titanium tweeter. The heavy-duty housing and structure provides a strong foundation.
  • COMPLETE PAIR: This complete set includes a pair of aluminum die-cast super titanium tweeters with 30 oz magnet structure, capacitor crossover network, and mounting hardware which are very easy to install.
Check Stock

(2) Rockville RXM68 6.5' 300w 8 Ohm Mid-Range Drivers Car Speakers, Mid-Bass

  • (2) RockvilIe RXM68 6.5″ 8-Ohm Car Speakers Totaling 300 Watts. Features: . RockvilIe RXM68 6.5″ 150W Peak / 75W RMS 8 Ohm Mid-Bass Driver Car Audio Speaker. Power Handling: 150 Watts Peak / 75 Watts RMS. 6.5 Open Basket Midrange Speaker. Cone is made of Kevlar. Reinforced Black Pulp Cone.
  • Treated Cloth Accordion Suspension. Linear Progressive Conex Spider. Acrylic Bullet Phase Plug High SPL Design. High Tinsel Expanded Steel Basket. Super Slim Design facilitates Door Installations. Oversize 1.5 High Temperature CCAR Voice Coil. 60 oz Magnet Structure Weight. Includes Wire Mesh Grill.
  • Prewired with Bass Blocking Capacitor. Frequency Response: 125Hz-10KHz. Sensitivity: 100dB @ 1w/1m. Impedance: 8 Ohms (4 ohm also available). Shallow Mounting Depth: 2.2. Cutout diameter: 5.63″. Mounting diameter: 6.14″. Mounting hole diameter: 4 holes- 0.197″ x 0.276″. TS Parameters:.
  • FMS: 170.6 Hz. QMS: 8.02. QES: 0.86. QTS: 0.78. RES: 6.1 Ohm. RMS: 3.3 kg/s. CMS: 0.05 mm/N. MMS: 8.4 gr. NREF: 0.83 %. BL: 6.4. SPL: 100 dB. VAS: 1.31. RE: 6.8 Ohm. RP: 7.9 Ohm. LP: 2.5 mH. GP: 296.2 uF. LE: 0.5 mH.
Check Stock

Wadoy CSR-U3 Compressor Saver Compatible with 5-2-1 4-5 Tons Hvac/AC Hard Start Capacitor Kit for Air Conditioner

  • [Main Function]:The compressor saver uses a powerful multi-layer starting capacitor and a smart switch to give your compressor the boost it needs to....
  • [Easy to Operate]: This Capacitor has been pre-wired for you. There are only 3 color coded wires which need to be connected. The Black wire will be....
  • [Applications and Specifications]: For scroll/reciprocating 208-240V only,capacitorsize:270-324 Mfd, Tonnage: 4 to 5 Ton..
  • [Package Includes]:Potential relay, Capacitor, mounting screws, zip-tie..
  • [High Quality]:CSR-U3 Compressor Saver Not Non-Original Aftermarket Parts , The quality is the same as the original， Please feel free to contact us....
Check Stock

AC Hard Start Capacitor Compatible with 5-2-1 CSR-U2 Compressor Saver for 3.5-4- 5 Tons Hvac Hard Start Kit

  • ♥ [ PROLONGED EQUIPMENT LIFE ] - This potential relay reduces the amount of time your compressor is on high amp start-up, add years to the life of....
  • ♥ [ START FASTER ] - Significantly reduces the amount of time it takes for your compressor to start.CSR-U2 start capacitor uses a powerful....
  • ♥ [ HARD STAR CAPACITOR ] - The Capacitor has been pre-wired for you. There are only 3 color coded wires which need to be connected.The Black wire....
  • ♥ [ LOWER ELECTRIC BILLS ] - Reduces the load on your compressor & Saves Electricity.
  • ♥ [ QUALITY GUARANTEE ] - This is Non-Original Aftermarket Parts, but the quality is much better. If you have any problem, please contact us, we....
Check Stock

ADUCI BBYPP 1Pairs 200W Two Bass Crossover Treble + Midrange + Dual Woofer Speaker Crossover Audio 3 Way Crossover Frequency Divider 4-8OHM

  • The frequency divider for a treble, a midrange, two bass, the speaker can also use a single bass for high,Mid and low speakers, speakers for 4-8 ohm impedance, the design is to take 4-8 OHM public value design Of the market products are mostly the same, in order to better improve the sound quality,.
  • Material: Inductor with oxygen-free copper around the system, pure copper wire diameter thick, has been verified, 100% pure copper wire, never with enameled aluminum production.
  • capacitor with audio-specific non-polar capacitor, Need more, design reasonable, beautiful appearance,.
  • Size: 11 cm length, 7 cm wide, 2.5 cm thick..
Check Stock

DS18 EN2T High Density Abs Universal A Pillar Pod 2 X 1 Tweeters (No Tweeters)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

Ugtell Motor Capacitor Cbb60 capacitance 60Uf 450Vac frequency 50/60Hz white capacitor (50Uf)

  • Package Content : 1 x motor run capacitor.
Check Stock

Wadoy CBB61 Fan Capacitor 2 Wire 10uf 2 Pack Celiling Fan Capacitor 250V

  • ▶Model Number: CBB61, Replacement for Motor Capacitor..
  • ▶Specification: Rated Voltage: 250V, 10uf 2-Wire, Tolerance : +/-5%, Rated Frequency : 50/60Hz, Max Temp: 70℃.
  • ▶Material: Plastic, Dielectric Material : Metalized Polypropylene Film. The product explosion-proof design, reliable quality..
  • ▶Package Include: 2 Pcs CBB61 Fan Capacitor.
  • ▶For any reason you are not completely satisfied, you can ask for a replacement or full refund.
Check Stock

1.5” Audio Car Tweeter Speaker - Aluminum Die-Cast Frame, 500 Watt Peak, 2 kHz - 25 kHz Frequency Response, 4 Ohm, Heavy Duty 30 oz. Magnet Structure - Pyle PDBT31 SILVER

  • 2 kHz - 25 kHz FREQUENCY RESPONSE: Pyramid’s 1'' car tweeter speaker has enhanced Ferrofluid and 2 kHz - 25 kHz frequency response that will complete a sound system of a car or woofer enclosure.
  • 500 WATT POWER: This bullet horn super tweeter speaker provides up to 500 watts peak power because it is equipped with 30 oz magnet structure. It's all housed in heavy duty aluminum housings.
  • 4 OHM IMPEDANCE: This car tweeter has 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation.
  • SENSITIVITY: This titanium super tweeter is very easy to install with a capacitor crossover network and hardware. The sensitivity is 106dB and weighs 3.4 lbs.
Check Stock