ReviewsMagnetic Car Phone Mount

Zchan Car Phone Holder fit for Audi A3,Air Vent Phone Mount fit for A3 2015-2020,Custom fit Magnetic Phone Holder Compatible for All Phones

  • Zchan Magnetic Car Phone Holder Fit For A3 2015-2020 ,Locate To The Instrument Panel,Wouldn'T Obstruct Driving Vision.
  • The Magnetic Car Phone Mount Width Is up To 1.69 Inch,Can Be Compatible With Mobile Phones From 3 To 7 Inches.Almost All Phones Sutiable For iPhone,Samsung,Smartphone without Heavy,Thin Phone Case.
  • No Tools Are Needed.Put The Base On The Car,The Phone Mount Is Stuck On The Base,Then Fasten The Ring,Open The Button Beside,Set The Phone On The Mount And Press It Gently..
  • You Can Use The Phone Mount For Car Vertically Or Horizontally Either.It Is Convenient To Navigate,Pickup Phone Calls.The Phone Mount Will Make Your Driving Safer And More Comfortable..
  • You will Get Magnetic Car Phone With Special Car Mount,Metal Base,Ball Joint,Circular Ring,User Manual,Why Not Purchase One To Light Your Decorative Car?.
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
  • Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous....
Check Stock

Magnetic Wireless Car Charger Mount Compatible with MagSafe Car Charger for iPhone 14/14 Pro/14 Pro Max/13/13 Pro/13 Pro Max/ 12/12Pro/Pro Max Air Vent Car Mount Phone Holder Charger for Mag Safe Case

  • 【Specially Design for iPhone 14/13/12 Series】 Mag safe car mount charger is only compatible with the iPhone 14 13 12/13 12 pro/13 12 pro max/ 13 12 mini without case, magnetic case or with mag-safe case, Not support non-magnetic phone or other phone case. Note: do not use a non-magnetic case, which has no magnet in itself and will weak the magnet between iphone phone series and charger and won’t hold the phone.
  • 【15W Magnetic Wireless Car Charger】 This mag safe charger car mount supports Max 15W fast wireless charging better than other 5W/ 7.5W/10W wireless car charger.(PLEASE NOT:Quick Charger 2.0/3.0 car charger adapter is required for 15W/10W/7.5W fast charging mode, and 5V is Slow Charge).
  • 【Magnetic Attachment】 Built-in strong magnet and anti-slip silicone can provide stable support for the mobile phone. It will auto-lock aligned with the charging coil to max magnetic fast charging and more stable charging. The official mag safe case is recommended for bumpy road. (Note: When using the magnetic ring, please align the magnetic ring with the wireless charging position of the mobile phone, otherwise it will cause the mobile phone to heat up or charge very slowly).
  • 【One-Hand Operation Mag-safe Phone Mount 】 Mag safe car mount charging w....
Check Stock

Unee Magnetic Phone Mount, Magnetic Phone Holder for Car[Nano Silica Gel Strong Adsorption][Strong Magnet][Washable] Phone Holder Car Mount Fits iPhone Samsung etc Most Smartphones

  • PORTABLE & MINI: This Magnetic Phone Holder for car can be flexibly installed in the center console/dashboard without affecting the sight of driving. Pick and place with one hand,suck tightly after release,Relaxed and safe.Its size is only 2 "* 0.5",Mini and easy to use..
  • STRONG MAGNETIC:This Car Phone Holder Mount has strong magnetic suction that provides a steady grip on your devices,Upgraded built-in rubidium magnet ,Fix your phone no shaking,sudden braking,speed bumps and bumpy roads..
  • MULTIFUNCTION & EASY TO USE: This Magnetic Phone Mount is Dual-purpose mount, both mount and hook used,meet needs of car,office,home,cookhouse. The phone can work normally with or without a phone case, Immediately use when you put anywhere you want.
  • NANO SILICA GEL & STABLE: This Magnetic Car Mount, the adsorption surface is made of nano silica gel, can be teared without leaving marks, 360° fix positions at will,adjustable with strong stable anti-slip,strong suction, fix the phone without shaking.Glass, plastic, metal and other smooth and clean surfaces is very suitable for using this Car Holder.But leather is not recommended to use it,that will reduce the stickiness..
  • WASHABLE & WIDELY USED: New Washable Reusable Car Magnetic Phone Stent. It can be applied to mo....
Check Stock

Pop-Tech 3M Adhesive Sticker Tapes Accessories Pack Replacement Kit for Magnetic Phone Car Mount and Pop Grip Mount Base, Includes Rectangle Metal Plate and Round Magic Plate, Clear Protective Films

  • 6 pack of 3m VHB adhesive mount stickers replacement for your magnetic car phone mounts and magnetic air vent mounts. Additional replacement 3m tapes to share with family members or friends. Great Backup 3m double sided stickers to make your mobile phone car mount reusable and best 3m adhesive sticker for car mount base. Do not worry about purchasing another phone mount..
  • 4 larger thin metal plates designed for multiple devices as backup. These round metal mounting plates have 3m adhesive on their back which can be worked with all magnetic car mounts to hold any size of smartphones firmly even in bumpy roads. 2 Pack of rectangle magnet plates is exclusively designed to better hold the larger and heavier devices.
  • 4 pack of protective films designed to protect your device from scratching. It also helps you to easily remove the magnet plate from your phone without leaving any residue. Remember to apply the protective film on the back of your device before sticking the metal plate.
  • 1 pair of round adhesive sticker replacement for your mount metal plate. Make the car mount plate reusable. 2 piece of alcohol prep pads sent as a GIFT to help you to take care of the surface where you attach your magnetic car mount. You may use the alcohol pad to cl....
Check Stock

Metal Plate for Phone Magnet, 10 Pack Volport MagicPlate with 3M Adhesive Replacement for Magnetic Phone Car Mount Holder & Cradle & Stand (Vent/CD/Windshield/Dashboard) - Rectangle and Round

  • This car magnet metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. Good quality and value replacement metal plates for magnetic cell phone holder.
  • All 10 pack magnet mount plates have strong 3m adhesive on the back – 4 pack rectangular and 6 pack round. Give you enough options to use with multiple devices. The rectangular thin metal plate is better for larger phones, i phone xs, xs max, xr, 8 plus, mini tablets and gps devices.
  • Super thin metal plate and add no perceptible bulk for your phone or phone case. This phone mount plate for cell phone magnets allows you to place your phone horizontally or vertically. No more phone falling off even going over bumpy roads.
  • 8 pack for multiple devices and 2 pack extra small metal plates. You can share the extra metal plates with your family members or friends. These car mount magnet plates are also great additions for various phone cases.
  • All of the metal plates are not magnetic plates, we recommend this metal mounting plate along with universal magnetic mounts for dashboard, vents, cd slot, windshield or windows. for WIRELESS CHARGING, please place metal plate on the phone AWAY FROM wireless charging sensor. Or place ....
Check Stock

SCOSCHE MAG12VB MagicMount Magnetic Power Outlet Mount Holder for Vehicles In Frustration Free Packaging Black

  • Car Phone Holder Charger - Safely and quickly secure any mobile device in your car lighter power outlet. Includes a 12V USB outlet to quickly charge....
  • -Magnetic Phone Holder - Comes with 30% stronger Rare-Earth neodymium phone magnets that provide a secure grip to your iPhone, Android or Tablet. 100%....
  • -Optimal Viewing - 360-degree adjustable rotating neck, this magnetic car mount allows viewing from any angle. The car magnetic phone mount connection....
  • -Convenient Design - Integrated cable clip secures the charging cable to our car cell phone holder for a clean mount. The cradle-free design permits....
  • -Home Accessories Included - Phone mount with 12V Power Adapter, MagicPlate.
Check Stock

Magnetic Phone Holder for Car,Foldable Phone Mount Multi-Functional 360°Rotation,Magnet for car Dashboard Phone Holder Magnetic Car Mount for iPhone 13 Pro Max / 13 Pro and All Smartphone

  • 2022 Upgraded Magnetic Mount: This magnetic Car Phone Holder Mount upgraded the function that have arm can be retracted and folded, more flexible to adapt to the angle you like. Mini Size design without taking up space never worry block the sight line..
  • Upgrade Import Stronger Magnet: The magnetic car mount has built-in 6*N52 magnets and a wider contact surface, which can create a strong attraction and firmly support your 4"~7" inch smartphone. The adhesive provides super strong adhesion between the dashboard and the car phone holder, which can be firmly attached to any flat surface in the car without worrying about the phone falling..
  • Adjustable design: This Foldable Desk Phone Holder for Car Dashboard is a versatile phone holder for car/home/office.Rotary gears built into the base can be 360-degree Adjustable, One-handed adjustment of any optimal viewing angle. Make calls and GPS navigation more convenient..
  • Wide Compatibility: This foldable phone stand is compatible with all 4-7 inches smartphones in phone cases, like iPhone 13 Mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, 12, 11 Pro XS Max XR X 8 7 6 6S ets.
  • Warm Note: When you use this universal magnetic car mount, please note: 1. After the phone mount is installed, please wait 12 hours....
Check Stock

BROOKSTONE, Air Vent Phone Car Holder, Magnetic Car Cradle, Fits Most Vehicle, 360 Degree Rotating Automotive Mount

  • BROOKSTONE AUTOMOTIVE CAR PHONE HOLDER – having your mobile device to hand while driving while being completely hands-free is simple and easy when using the Brookstone air vent phone mount for car! Now you never need to worry about your phone holder not securely attaching to the windshield as this magnetic cell phone cradle for car simply slots and securely locks into the air vent, providing clear and secure access to your phone while driving..
  • MAGNETIC CELL PHONE CRADLE FOR CAR – your mobile device is held securely via the magnetic disc which attaches to the back of your phone. This slim and discreet magnetic disc can be attached to either the back of your phone or phone case, which then magnetises to the air vent holder for phone for a strong hold. These peel-and-stick magnetic discs come in a pack of 2 so you have a spare or you can use for multiple mobile devices..
  • 360-DEGREE ROTATING CAR VENT PHONE MOUNT – once your mobile phone is secured into the phone holder for car, you can safely use the 360-degree rotating feature which allows you to view your cell phone in either portrait or landscape mode. Experience safe, optimum viewing of your phone screen, without obstructing your view – ideal for using when making calls, using the GPS nav....
Check Stock

6pcs 3M Sticky Adhesive Replacement Parts for Socket Base, VOLPORT Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs VHB Sticker Pads for Cell Magnetic Phone Car Mount Holder

  • ...TO COMPATIBLE WITH COLLAPSIBLE GRIP: VOLPORT new top 3M sticky adhesive flex tape pack is exclusively designed to compatible with phone grip back&base.
  • extra strong and easy to change skin gel for grip. Big vhb sticky tape fit perfect phone grip base&back.
  • small double side sticky adhesive compatible with magnetic car mount&holder’s back replacement. Best cover replacement sticker parts ever, great but cheap magic gift for boys and girls, man and woman..
  • 6 PIECES BIG ADHESIVE STIKER BACK BASE: We adopt original 3m VHB super adhesive gel, which is 40% stronger than ordinary black glue, high temperature and low temperature resistance. Big stickey adhesive great compatible with base&backing..
  • 2 PIECES MAGNETIC PHONE CAR MOUNT ADHESIVE: 2 small double sided adhesive 3m phone car mount sticky can be use on the bottom of dashboard magnet car phone holder, flat 3m adhesive magnetic phone mount, magnetic wall mount replacement, collapsible phone grip wall holder, 360 Rotation magnetic car mount replacement, pad wall mount magnetic, dash cam mount ect, wide use in car or at home. Please clean the adhesive surface with alcohol pad before use..
  • WIDE APPLICATIONS: Volport universal accessories can be used in home bathroom mirror, refrig....
Check Stock