ReviewsMagnetic Clamps

FOLIV 100Pcs Single Ear Hose Clamps, 304 Stainless Steel Stepless Hose Clamps with Ear Clamp Pincer, Cinch Rings Crimp Hose Clamps Assortment Kit for Water Pipe, Plumbing and Automotive Use (6-28.6mm)

  • ...tepless clamps and so on, convenient for your installation.
  • Reliable 304 Stainless Steel: These ear hose clamps are made of 304 stainless steel, these clamps are corrosion resistant and anti-rust, can be applied to complex environment.
  • The bigger cold-working deformation 304 stainless steel material get, the greater magnetic properties it will possess, which is normal..
  • Easy to Store: There are many kinds of hose clamps, you will get 100Pcs differnt szies single hose clamp, packed in a clear box, easy to reach the right size and store..
  • Service: If you are not satisfied for any reason, please get touch to us directly, VIGRUE offer a back. No hassles, no delays..
Check Stock

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock

FEBRYTOLD 12 Pcs CV Boot Clamp 6 Pcs Small and 6 Pcs Large Stainless Steel Universal Adjustable Stainless Steel Drive Shaft CV Boot Clamp

  • 【Material】High-quality non-magnetic Stainless Steel. Solid and Durable..
  • 【Function】Use on Drive / CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • 【Compatible】Adjustable Perimeter(Height): 315-415mm(9mm), 142mm-176mm(7mm)..
  • 【Installation】Good Working Condition and Easy to Install. Placement on Vehicle: Left , Right, Front and Rear..
  • 【Package】6 Pcs Small CV Boot Clamps(Height: 7mm), 6 Pcs Large CV Boot Clamps(Height: 9mm)..
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

Phone Case for AT&T Huawei Ascend XT2 Prepaid Smartphone Cricket Huawei Elate Frosted Gel Flex Cover Case with Air Vent Magnetic Car Mount Phone Holder Frosted-Clear

  • Designed for: AT&T Huawei Ascend XT2 Prepaid Smartphone, Cricket Huawei Elate, H1711.
  • Easy fit, apply or removed. Material: TPU / Gel. Tailored holes allow easy access to all buttons without having to remove the skin. Protected your....
  • Air Vent Magnetic Car Mount Phone Holder - Simple design slips right into the air vent and magnetically attaches to your cell phone. The magnetic car....
  • NO HASSLE MOUNT: Magnetic design means, no cradles, brackets, clamps or gel and sticky residue. 3M Adhesive Metal Plate: Stick adhesive metal plate....
  • Package includes: One Air Vent Magnetic Car Mount Phone Holder, One Metal Plate.
Check Stock

Grip Like a Vice Pt. 2 [Vinyl]

  • FUNCTION: Designed to hold your wood, plastic, metal, tubing, threaded items and irregularly shaped stock material safely in place while protecting them from clamping damage.
  • MAGNETIC: Innovative neodymium magnets ensure a quick, reliable attachment onto your vise, giving you a quick and screw-less installation without the need for additional tools.
  • NON-MARRING: Soft vice jaws are made with a high quality plastic polymer construction, producing a delicate, non-abrasive clamping action that will not scrape, scratch, or scuff your working stock or material.
  • VERSATILE: Possesses a multi-groove design that’s perfect and compatible with an assortment of holding slots for drill presses, vise blocks, mill clamps and other woodworking tools.
Check Stock

VIGRUE 100Pcs 6-28.6mm Single Ear Hose Clamps 10 Sizes with Ear Clamp Pincer 304 Stainless Steel Stepless Hose Clamps for Securing Pipe Hoses and Automotive Use

  • ...e clamps, double ear clamps, stepless clamps and so on, convenient for your installation.
  • 【Reliable SS Material】Made of 304 stainless steel, these clamps are corrosion resistant and anti-rust, can be applied to complex environment.
  • The bigger cold-working deformation 304 stainless steel material get, the greater magnetic properties it will possess, which is normal..
Check Stock

Magnetic V-Pads Kit,Strong Hand Tools,Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Pipe Magnets,Magnets On Both Pad Face & Bottom Pull Force 12 lbs 4 Pack

  • Strong Hand Tools, Magnetic V-Pads Kit,Magnetic Tack Welding Tool,Welding accessories and tools,Magnets on both pad face and the bottom,Each v-pad....
  • Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time....
  • Perfect spot welding clamp: Hold tabs, gussets, plates and odd shaped pieces in position for tack welding.Widely applied: Widely used on doors, tool....
  • 4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and....
  • Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F. Feel free to contact us by....
Check Stock

2 Pieces 8.7 Inch Wooden Toaster Tongs With Magnet Magnetic Bamboo Toaster Tongs Wood Toast Tongs Natural Bamboo Kitchen Utensil Accessories for Cooking Bagel Cake Muffin Bread

  • Package content: you will receive two different types of bamboo clamps, 1 piece magnetic round head bamboo toaster tong and 1 piece magnetic square head bamboo toaster tong, their length is 22 cm/ 8.7 inch, which is enough to meet your different needs.
  • Magnetic holder: it adopts a magnet design, wooden toast tongs firmly grasp any metal/ magnetic surface, saving you storage space.
  • Natural material: magnetic bamboo toaster tong is made of natural bamboo, safe, high temperature resistant and reusable, it has the characteristics of anti odor, easy to clean, fast drying, and very convenient to use.
  • Easy to use: it is long enough to keep you away from the heat source, and the long handle design makes you feel comfortable.
  • The nice grip design allows you to grab food easily and comfortably to prevent food from slipping.
  • Application: it is very suitable for transporting light food, such as taking bread from toaster, roasting , grabbing cheese, fruit, etc..
  • It is also a little cooking expert, grilling or frying can easily flip chicken without being scalded.
Check Stock

East Lake Axle replacement for front left cv axle Arctic Cat 550/650 / 700 Prowler 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

  • 1, 【What Will You Get】We prepared 12Pcs small stainless steel cv boot clamps and 12Pcs large clamps for fixing cv boots in this kit!.
  • 2, 【Wide Application】Suitable for inner or outet CV joints on most cars and light commercial vehicles, 100% brand new , professional manufacturing, steel clamp is the best replacement for your old one. A perfect replacement for your car broken drive shaft CV boot clamp..
  • 3, 【Simple to Use 】There is the band that goes round the boot, and then a part of it sticks up like a upside down U and the rest of the band clips into place over the other end of the band making a full loop. You get it as tight as you can then use the pliers to pinch the U shut to tighten it the rest of the way. This would be easier with a drawing..
  • 4, 【 High Quality】The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
  • 5, 【100% Satisfaction Guarantee 】 We promise to provide every customers with 100% satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us by email, we will be here to help..
Check Stock

Magnetic Helping Hand, Preciva Soldering Helping Hands Electronic Repair Tool with 4 Pcs Pillars PCB Holder, 4Pcs Flexible Metal Arms, 6Pcs Alligator Clamps and Heavy Duty Stainless Steel Base.

  • What You Will Get: 4x Flexible Adjustable metal gooseneck arms, 4x Pillars circuit board holders, 1x Stainless steel base and 6x alligator clamps. One User manual, and ONE- year wanrranty..
  • Flexible Magnetic Metal Arms: It comes with four flexible metal gooseneck arms, which could be adjusted to the position you want. Andthe magnet of the end could be stable on the steel base. There are two sizes of the arms, one is 13.78” and another one is 5.91”. Makes you work easier and more convenient..
  • Stainless Steel Base: The size of the steel base is: 9”x 5.9” (230mm x 150mm). It comes with four non-slip rubber pads, which could be stable when you use it for work. Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts.
  • 6PCS Alligator Clips: The alligator clamps could be rotated 360 degrees, can also be adjusted to the exact position you want with the turn of your fingers. They are convenient for soldering, crafts work and DIY projects..
  • 4PCS Magnetic Pillar Holders: Could be Inserted to the hole of PCB board, then help fix the PCB board and assist the welding work,could suitble for different types of PCBs, also can be used with the helping arm..
Check Stock