ReviewsMagnetic Coupling For Blowers

uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L20xD12 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Red,2pcs

  • Connection Diameter: 5mm to 5mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/4 inch to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 1/4 inch to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/4 inch to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 1/4 inch to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue w Wrench

  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,2pcs

  • Connection Bore Diameter: 1/4 inch to 1/4 inch.
  • Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs

  • Connection Bore Diameter: 1/4 inch to 1/4 inch.
  • Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

5016CHN, Coupling Chain, Factory New

  • 003cb003ePrice For:003c/b003e Each 003cb003eApplication003c/b003e: Motors, Pumps, Compressors, Blowers, Mixers and Conveyors 003cb003eHP Rating @ 1200 RPM003c/b003e: 11.14 003cb003eHP Rating @ 100 RPM003c/b003e: 0.93 003cb003eBody Style003c/b003e: 6E 003cb003eWidth003c/b003e: 1.88" 003cb003eOutside Dia.003c/b003e: 3.75" 003cb003eInsert Design003c/b003e: Two-Piece with Retaining Ring 003cb003eOperating Temp.003c/b003e: -30 Degrees to 275 Degrees F 003cb003eRated Torque003c/b003e: 585 in.-lb. 003cb003eItem003c/b003e: Sleeve Coupling Insert 003cb003eInsert Material003c/b003e: EPDM Rubber 003cb003eMax. RPM003c/b003e: 6000.
  • 003cb003eHP Rating @ 3600 RPM003c/b003e: 33.42 003cb003eHP Rating @ 1800 RPM003c/b003e: 16.71 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

XtremeAir PX10-U30, 30\

  • COMPLETION IN THE U.S.A.: This is why XtremeAIR range hoods are different than other brands..
  • POWERFUL YET QUIET: ~900 CFM max, squirrel cage blowers, twin Centrifugal Motors (503 CFM by CEC)..
  • SEAMLESS / NON-MAGNETIC STAINLESS STEEL HOOD BODY: Super thick 1.0 mm or 19 gauge premium commercial grade non-magnetic stainless steel..
  • LED GU10 BASE LIGHTS: Universal GU10 light base, which you can easily find if needed..
Check Stock

Magnetic Jet Motor BF-004 for Luraco Magnetic Jet Pedicure Spa Tubs Wet End Use with Pedicure Liners (Includes Propeller and Cap)

  • BF-004 Pedicure spa chair part magnetic head uses magnetic coupling technology.Whirlpool Spa Chair.MOTOR DIMENSION: 3 3/8"" Diameter Back Head X 3 1/8"" ..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
  • There is no shaft seal, will never leak, is worry free..
  • If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions!.
Check Stock

Showingo New Pipeless Magnetic Jet Head Motor for LURACO Pedicure spa Chair Part Magnetic Head BF-004 Pedicure spa Tubs Includes Propeller and Cap

  • Pedicure spa chair part magnetic head uses magnetic coupling technology..
  • Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • There is no shaft seal, will never leak, is worry free.
  • The Magnet-jet be easily sanitized, clean, and service..
Check Stock

Pipeless Jet Magnetic/Spa Pedicure Chair Motor for Luraco Magnet Jet

  • 【Pipeless Magnetic Jet For LURACO 】Fit Luraco pipeless motor magnetic jet nail pedicure spa chair, Mostly, this Jet is able to be installed in all models..
  • 【Luraco Magnet Jet】Compatible with Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
  • 【FEATURES】Luraco pipeless magnetic jet pedicure spa massage chair, Patented magnetic coupling design,Dual powerful jet streams 35 degrees with respect to pump axis,Easy to install,Super Easy to clean..
  • 【Premium Quality】Pipe-less Jet Long life motor Green Technology only 50W energy consumption,Low power consumption,Long life motor.Very quiet when running..
  • 【Luraco Magnetic Jet 】 Specifications:110VAC,Built with magnetic impeller to be used easily with liner,Need 3"1/2 hole to mount the jet in the tub..
Check Stock