ReviewsMagnetic Torque Coupling

BMA0-G Zero Backlash Ball Torque Limiter Safety Coupling Overload Clutch Torque limiters with Coupling Small Torque Slip Clutch

Under normal over-load conditions, it can function as an ordinary coupling. Once overloaded, it can function as a protection, which is convenient for customers to connect shaft to shaft..
Set the torque by adjusting the scale of its adjusting nut. This operation makes the adjustment of the torque very convenient and simple..
When an overload occurs, instantaneous reduction of torque transmission can be achieved..
The shortest response time and the highest sensitivity..
It can be equipped with an elongated center body to connect with various drives..

Check Stock

uxcell Shaft Coupling 14mm to 14mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Shaft Usage: 14mm to 14mm/0.55 inch to 0.55 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock

uxcell 5mm to 8mm Bore One Diaphragm Motor Wheel Flexible Coupling Joint

Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Bore Diameter: 5mm to 8mm / 0.19inch to 0.31inch.
Material: Aluminum alloy Type: Plum shaped.
Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen.
Flexibility of coupling shaft removes stress between the motor and driving components.
The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc.

Check Stock

uxcell 6mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock

uxcell Shaft Coupling 12.7mm to 12.7mm Bore L35xD30 Flexible Coupler Joint for Servo Stepped Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Shaft Usage: 12.7mm to 12.7mm/0.5 inch to 0.5 inchTotal Size: 35 x 30mm / 1.38 inch x 1.18 inch (L*D).
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock

uxcell 5mm to 6.35mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.

Check Stock

uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D).
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Check Stock

uxcell 3mm to 1/8 inch Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock

8 Pack 7mm Flexible Coupling Connector for Any Motors with Shaft Diameter of 0.275in/7mm - Car Wheels Tires Shaft

【SIZE】--L25mm x D20mm/0.98inch x 0.79inch( L*D).
Diameter: 5mm to 8mm / 0.19inch to 0.31inch.Set screwsThread Size: M3.
【MATERIAL】--The product is made of high-quality aluminum alloy with high hardness and blue polyurethane to make the overall effect more textured. Type: Plum shaped..
【SPECIAL DESIGN】--Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, Wear resistant ,high hardness and excellent response..
【QUALITY】--Super torque can absorb vibration, appropriate a large torque transmission.It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
【APPLICATION】--The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..

Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

Check Stock