ReviewsMagpul Side Mount Sights

RTMGOB No-Tritium Fiber Optic Red/Green Sights for Pistol Taurus G2C, PT111, G3, TX22, G2, 709, G2S, PT140, 740, Taurus G2C Accessories Sights Set (Red Sights)

  • 【Sights for Taurus Models】: The sights fit with Taurus G2C, PT111, G3, TX22, G2, 709, G2S, PT140, and Taurus 740 models.
  • 【Red/Green Fiber Optic Sights】: The Taurus G2C sights use traditional fiber optic material, encase 3 bright red/green-dot fiber rods, better for aiming in day-time or bright light environment. Easy for eyes to pick up sights, aids quick and accurate targeting.
  • 【Durable & Concealed Design】: The traurus G2C sights designed with solid aluminum alloy sheath, strong and lightweight, give better protection to optical fiber tube from damage or falling off, thus very durable Taurus accessories sights to use in training, practice, and outdoor sports activities.
  • Also, the fiber optic sights, low profile, with great visibility for users, but concealed from target.
  • 【Front & Rear Sights, Easy to Mount 】: The sights set easy to align and mount tightly on pistol Taurus. Set the rear and front sights onto Taurus slide, and secure screws with the hex wrench attachment. Only take seconds to mount the sights on your Taurus pistol.
  • 【Notice & Service】: Please notice the Taurus sights fit for Taurus G2C, PT111, G3, TX22, G2, 709, G2S, PT140, and Taurus 740 models. Before purchase, please check your Taurus model. The sights are traditiona....
Check Stock

Monstrum Ghost UltraCompakt 3X Micro Red Dot Magnifier with Flip-to-Side Mount | Black

  • 3x magnifier for use with red dot sights, providing a secondary 3x magnified sight picture.
  • Flip-to-side mount with quick engage mechanism allows for rapid transition between red dot usage with or without magnification – allowing for standard 1x red dot usage for close range targets and 3x magnification for mid to long range targets.
  • Built atop our all-new Ultracompakt prism optic assembly – 15% shorter and 10% lighter than our previous generation magnifiers.
  • Compatible with the Monstrum Ghost Red Dot and other 1×20 form factor red dots.
  • 11 ounces in weight and 3.5 inches in length with a center height of 1.55 inches from the base of mount for absolute cowitness with standard front sights.
Check Stock

RTMGOB Flip Up Sights - Fiber Optic Red Green Dot Sights Folding Polymer Sights for Picatinny Rail Adjustable Front and Backup Sights Set (Black)

  • 【Red and Green Dot Sights】: RTMGOB flip up sights desined with bright red and green dots, easy to get a fast and accurate target aiming. Tactical optic accessories to increase visibility and help you improve your targeting accuracy.
  • 【Easy-to-mount Flip Up Sights】: RTMGOB flip up sights with spring-loaded foldable parts and Allen wrench, easy to mount and flip up/down. Simply sliding the back cover with thumb, and pushing the flip up sight optic part upward.
  • fastening the front and backup sights on the rail with the Allen wrench accessory attached in the case. The flip up sight is a great aiming optic equipment accessory, easy for you to mount and use.
  • 【Adjustable & Foldable Front and Rear Sight】: Rotating the gear under the front sight aperture to adjust sight elevation to get the best visual targeting effect.
  • rotating the rear sight knob to move the sight wintage aperture left or right.
  • when the sights are not needed, just flip down the folding sights. Convenient to use in outdoor sports and recreation activities.
  • 【Light & Durable Fiber Optics Sight】: Polymer fiber optic front and backup sights, light in weight and portable for you to carry.
  • solid and durable construction, designed to increase sight steadiness and accuracy as much as po....
Check Stock

EOTECH HHS II Holographic Hybrid Sight - EXPS2-2 with G33 Magnifier

  • EOTECH HHS II – Holographic Hybrid Sight includes EXPS2-2 sight with G33 Magnifier.
  • Quick Transitions – Change quickly from close quarter to medium range targets with the included G33 Magnifier and Switch-to-Side mount.
  • Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
  • Side Button Operation – Compact design and side button operation consumes minimal rail space. G33.STS is compatible with all EOTech Holographic Weapon Sights.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock

Monstrum Ghost 3X Red Dot Magnifier with Flip-to-Side Mount | Black

  • 3x magnifier for use with red dot sights, providing a secondary 3x magnified sight picture.
  • Flip-to-side mount with quick engage mechanism allows for rapid transition between red dot usage with or without magnification - allowing for standard 1x red dot usage for close range targets and 3x magnification for mid to long range targets.
  • Built with the Monstrum proprietary Helios3 glass prism optical system, the Ghost 3x Magnifier refracts light with a glass prism providing a crisper sight picture in a more compact form factor than competing magnifiers.
  • Rugged 6061 grade aluminum scope housing.
  • both nitrogen charged and o-ring sealed for IPX7 rated water and fog resistance.
  • 4 inches in length with a center height of 1.55 inches from the base of mount for absolute cowitness with standard front sights.
Check Stock

GunSkins AR-10 Mag Skin - Premium Vinyl Mag Wrap with Precut Pieces - Easy to Install and Fits 20/25 rd Magazines - 100% Waterproof Non-Reflective Matte Finish - Made in USA - Proveil Victory

  • GUN SAFE MOUNTING SOLUTIONS: Customized for standard "Mil-Spec" AR-10 and 1 Magpul PMAG, our rifle mount latches directly into the magazine release and locks in to ensure that your gun is ready to be put safely on display.
  • PROUDLY MADE IN AMERICA: At Spartan Mounts, all of our products are made in the U.S.A. from raw plastic sourced from American producers, and everything in our product line is manufactured just north of Pittsburgh, PA.
  • LOW PROFILE, AMBIDEXTROUS DESIGN: Our ambidextrous mount allows both left and right mounting, and is a lower profile design that covers a small area so that your firearm is the center of attention when on display.
  • HORIZONTAL AND VERTICAL MOUNTING: Each holder is extremely versatile and can be angled or mounted in all directions to accommodate AR-10 rifles.
  • Please note that this model does not fit the 308 DPMS or Armalite AR-10b.
Check Stock

Monstrum Ghost 3X Red Dot Magnifier with Flip-to-Side Mount | Flat Dark Earth

  • 3x magnifier for use with red dot sights, providing a secondary 3x magnified sight picture.
  • Flip-to-side mount with quick engage mechanism allows for rapid transition between red dot usage with or without magnification – allowing for standard 1x red dot usage for close range targets and 3x magnification for mid to long range targets.
  • Built with the Monstrum proprietary Helios3 glass prism optical system, the Ghost 3x Magnifier refracts light with a glass prism providing a crisper sight picture in a more compact form factor than competing magnifiers.
  • Rugged 6061 grade aluminum scope housing.
  • both nitrogen charged and o-ring sealed for IPX7 rated water and fog resistance.
  • 4 inches in length with a center height of 1.55 inches from the base of mount for absolute cowitness with standard front sights.
Check Stock

OZARK ARMAMENT 45 Degree Offset Iron Sights - Canted Iron Sights - Works for Right & Left Hand Offset Iron Sights - 45 Degree Backup Sights - 45 Degree Offset Sights - Fixed Iron Sights

  • ADAPTABLE, MULTIFUNCITON USE: Our angled 45 offset sights are designed to easily fit any situation and feature a dual aperture design. Easily switch between optics or iron sights without having to flip up your iron sights..
  • AMBIDEXTROUS DESIGN: Our 45 Degree Offset Iron Sights can be used by both left handed and right handed shooters. Mount the left hand offset iron sights backwards to use them left handed or mount normally to use them right handed..
  • HEAVY-DUTY METAL CONSTRUCTION: Our Fixed iron sights are constructed of metal for a lifetime of use, Tight tolerances gives our canted iron sights a secure fit to any standard Picatinny or weaver rail..
  • LOW PROFILE: Our 45 degree offset sights feature a low profile design allowing you to easily switch between your iron sights or your optics..
  • A BRAND YOU CAN TRUST: All back up iron sights including our 45 degree offset iron sight accessories are Backed by a full NO B.S. Lifetime warranty against any and all defects, full and dedicated U.S. based support team to answer any questions you have..
Check Stock

Vortex Optics Precision Quick-Release Extended Cantilever 30mm Riflescope Mount - 2-Inch Offset , black

  • This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle..
  • The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle..
  • This mount positions thecenterof the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base..
  • The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish..
  • Weighs 8.9 ounces. Made with pride in the USA.DescriptionVortex Precision QR Cantilever Mount 30mm 2" offset::Set your sights on the best. The Vortex Precision QR Cantilever Mount is a quick-release cantilever mount that's designed for mounting telescopic sights. The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement. Take the performance to a new level with Vortex..
Check Stock

GOLDEN SKS Scope Mount

  • This SKS scope mount requires no drilling or tapping or any gunsmith work, just remove present receiver cover and replace with mount,( some minor fitting by filing may be required.) Side mounting allows instant use of iron sights, comes with set of one inch rings.
Check Stock

Magpul MBUS 3 Flip-Up Backup Iron Sights, Olive Drab Green, Back Sight

  • The next evolution in our MBUS (Magpul Back-Up Sight) line, the MBUS 3 incorporates the best features, strengths and value of our original MBUS and MBUS Pro Sights in a feature-packed back-up sight system.
  • Significantly reduced in size from the MBUS, it sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware.
  • Aesthetics are derived from the MBUS Pro, but the MBUS 3 Front Sight is constructed of our impact-resistant polymer, making it lightweight and extremely durable.
  • Featuring the same spring-loaded technology as its predecessor, they can be deployed with an ambidextrous push-button.
  • Sits at standard height when deployed and includes tool-less elevation adjustment of a dual width enhanced front post similar to the MBUS Pro.
Check Stock