ReviewsMain Chip

BIGTREETECH Octopus Pro V1.0 Controller Board New Upgrade with Octopus 32bit Motherboard Compatible TMC5160 Pro Stepper Driver Support Powerful DIY for 3D Printer Main Chip is STM32F446ZET6

  • 【Main Control Chip】The main control adopts the 32-bit ARM Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180 MHz. The external....
  • 【About Using Firmware】Support the use of Marlin2.0, killper, RRF three types of firmware. Please note: STM32F446ZET6 MCU flash memory space is....
  • 【Stepper Motor】The Octopus Pro 3D printing motherboard can support up to 8 stepper motor drivers, and the motor drive power supply supports up to....
  • 【Support Proximity Sensor】Support proximity sensor, jumper optional pull-up resistor, support more models. This function can be sensed without....
  • 【High Temperature Test】The onboard MAX31865 can support 2/4-wire PT100/PT1000 temperature measurement without welding (the soldering resistance....
Check Stock

TCMMRC FC F4 Flight Controller 2-6S OSD BetaFlight 20x20mm for FPV Racing Drone

  • VERY EASY TO SOLDER, The F4 Flight Controller has multiple ports, no soldering, just plug in the port line. This is convenient for beginners..
  • FAST RESPONSE TIME AND EXCELLENT SHOCK ABSORPTION,MPU6000 gyro with SPI bus mode.
  • HIGHER RATE PID100MHz STM32F411 main control chip.
  • CLEANER IMAGE DISPLAYOSD chip and 5V BEC on board.
  • REASONABLE LAYOUT TO AVOID JUMPERSAccording to the installation requirements of most pilots, the functional pads are grouped together.
Check Stock

CNC Motion Controller - DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.
  • ARM9 main control chip,FPGA core algorithm chip.
  • USB flash disk support for G code file input,no size limited of the G-code file.
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
Check Stock

Creality 48CM TF to Micro SD TF Extension Cable Memory Card Adapter for/Raspberry Pi/Arduino GPS TV SDXC Creality CR10/10S/S4/S5/Ender 3/Ender 3 Pro Monoprice Select Mini 3D Printer

  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....
Check Stock

SoarUp 35A 4 in 1 ESC, 48mhz Frequency Throttle Response BLHeli‑32 4 in 1 ESC for FPV Traversing Machine

  • 35A ESC and Advanced SMTs: Integrate 4 high performance 35A ESCs, built in galvanometer, and purchase new advanced SMTs. After such high integration, the volume is only the same as that of the control of the traversing aircraft, so the installation.
  • Hardware PWM and Damped Light Technology: Hardware PWM drive motor, less noise, more throttle response. Damped Light technology, regenerative braking function, make motor deceleration more sensitive and effective, control more accurate.
  • BLHeli‑S Firmware and ESC Setting: Using BLHeli‑S firmware has powerful performance and rich functions.
  • it also supports setting ESC parameters in various ways, or upgrading ESC firmware (such as setting or upgrading ESC via throttle signal line, using ot.
  • Support and Input Output Line: It not only supports ordinary PWM throttle signal mode, oneshot 125, oneshot 42 and multshot ultra high speed throttle signals, but also supports the latest dshot150 / 300 / 600 digital throttle, with strong anti interferenc.
  • Main Control Chip and PCB Production: EMF8BB21F16G main control chip, operating frequency up to 48mhz. For mosfet, three in one IC driver and high quality high frequency ceramic capacitor. In high end PCB production process, pads are metallized to avoid p.
Check Stock

4ct Diamond Tennis Bracelet 14K White Gold

  • [71000+ Retro Games] Kinhank 2tb gaming HDD is pre-installed 73+ emulators and 71000+ classic video games,including 5000+3D games, well compatible....
  • [Plug and Play] Kinhank 2tb hard drive is plug and play, No driver needed, just a data cable connection, your computer will instantly become a game....
  • [Widely Compatible]Kinhank hard drive game console is compatible with all Windows / Mac OS / Linux operating system that with X86 architecture,....
  • [SATA 3.0 Chip]Super hd kinhank 2tb game console is adopt SATA 3.0 main control chip, support UASP protocol, greatly reduce CPU occupancy rate, data....
  • [Fast Transmission Speed] USB 3.0 Interface,Fast Transmission Speed. 10 Min Smart Sleep, LED indicator,monitor working status at any time.reducing the....
Check Stock

Aexit 5 Pcs Fixed Resistors HD74LS04P Hex Inverter 2.54mm Pin Pitch Black Silver Resistor Chip Arrays Tone DIP

  • Package Content: 5 Pcs x Hex Inverter Chip.
  • Main Body Size: 19 x 8 x 7mm/0.8"x0.3"x0.3"(L*W*H).
  • Material: Electronic Part, Metal, Plastic.
Check Stock

Gator Cases Multi Output Pedal Board Power Supply; (8) 9v Outputs and (3) 18v Outputs (G-BUS-8-US)

  • Support for XBOX ONE S/XBOX ONE X console..
  • Support for Windows PC (the first support for PC development)..
  • Perfect compatibility, stable and applicable, with a diagrammatic drawing, clear at a glance, easy to use..
  • Support for computer use, computer hardware requires a 64bit (X64) processor..
  • Builtin USB3.0 bus (for Intel or for Renesas chip is the main control chip of USB3.0 if possible)..
Check Stock

DDCSV3.1 Upgrade Offline Stand-alone 4 Axis CNC Controller CNC Router Engraver Machine Motion Controller System Read G Code TFT screen 24VDC for CNC Carving Milling Lathe Machine/Servo/Stepper Motor

  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
  • 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs.
  • USB flash disk support for G code file input,no size limited of the G-code file.
  • ARM9 main control chip,FPGA core algorithm chip.
  • The Power Supply for the controller is 24VDC,DDCSV3.1 needs two power supplies,main power is for system,IO port is for input and output ports, Current is not less than 1A.
  • Because of the IO power,system can supply the power for all IO ports.So no need the external power supply for IO port anymore.
  • 3.1 Version enhenced Algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
  • Jog function for each axis (continuous, step, defined distance).
Check Stock

Wai Danie 2x H7 LED Headlight Kit 1950W 295000LM High-Low Beam Bulb CREE 6500K Lamp White

  • 2x H7 LED Headlight Kit 1950W 295000LM High-Low Beam Bulb CREE 6500K Lamp White..
  • Main Advantage: Irradiation distance up to 200 meters.Brightness highly arrived 8000Lm/pair,4000Lm/piece..
  • Package Included: 2x H7 MINI LED Headlight Bulbs..
  • Chip: COB LED Chip Color Temperature:6500K Super White Work Temperature:-40 C ---- +90 C..
Check Stock

KeeYees SOP8 SOIC8 Test Clip and CH341A USB Programmer Flash for Most of 24 25 Series EEPROM BIOS Chip with PDF Tutorial

  • The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient..
  • The main purpose of the CH341A Programmer is to back up, erase, program, calibrate and other actions on various software..
  • The CH341A programmer supports most of the 24/25 series EEPROM SOP8 chips on the market, but not all of them. Please be sure to check whether your chip model is within the compatible range in the product description before purchasing..
  • The SOP8 clip support both wide body and narrow body SOP8 chip with 1.27MM Pitch..
  • We provide detailed PDF tutorials, CH341A software, and drivers, which will be sent to you by email after the order. If you do not receive it, please send us a message..
Check Stock