ReviewsMain Distribution Board

PowerMax PM3-55-MBA Smart Battery Charger Built-in 3 Stage Charging Replacement for WFCO WF-8955

  • RV AC & DC Power Distribution Center, with 30 Amp AC and 12 Volt DC Distribution Panel.
  • Exact Replacement for any WF-8900 PEC RV Power Center.
  • Built-in 3 Stage charging and single output modes.
  • Pre-wired DC board and strain reliefs for easier installation.
  • Overdamp and Reverse polarity protection.
Check Stock

Retrospec Ruck Sack iSup Inflatable Standup Paddle Board Bag

  • Impressively durable nylon shell prevents damage to your board and accessories.
  • Mesh netting on top and sides for better ventilation to dry board.
  • Fits Retrospec's WEEKENDER, WEEKENDER-TOURING, and WEEKENDER-NANO inflatable standup paddle boards.
  • Adjustable sides and shoulder straps for easy transporting and storing, torso strap for better distribution of weight.
Check Stock

Retrospec Ruck Sack iSup Inflatable Standup Paddle Board Bag

  • Impressively durable nylon shell prevents damage to your board and accessories.
  • Mesh netting on top and sides for better ventilation to dry board.
  • Fits Retrospec's WEEKENDER, WEEKENDER-TOURING, and WEEKENDER-NANO inflatable standup paddle boards.
  • Adjustable sides and shoulder straps for easy transporting and storing, torso strap for better distribution of weight.
Check Stock

Buachois 2 Pcs 68x36mm 0.3W 5V Solar Power Solar Energy Panels Electric Motor STEM Kits Electronic Assembly Solar Powered Toy Kit for Boys and Girls

  • POLYSILICON PRODUCTS:The circuit board is made of high-quality polysilicon, with high photoelectric conversion rate, energy saving, good insulation....
  • MAIN FUNCTION:The circuit board is a device that directly or indirectly converts solar radiation energy into electrical energy through photoelectric....
  • SCOPE OF APPLICATION:The circuit board is usually used in solar garden lighting, small home lighting systems, solar street lights, outdoor solar....
  • ANTI-WIND AND ANTI-FREEZE:The circuit board adopts the design of anti-wind and anti-freeze, so that it can work normally in various environments, with....
  • MAIN PARAMETERS:The circuit board has a working voltage of 5V, an open circuit voltage of 6.2V, a working current of 0-60mA, a short-circuit current....
Check Stock

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock

NEW W10515057 LED Light compatible for Whirlpool, Kenmore, Maytag, KitchenAid, Refrigerators, WPW10515057 AP6022533 PS11755866 by IcetechCo- 1 YEAR WARRANTY

  • Quality Design Backed by Icetech 1 YEAR WARRANTY for Peace of mind – The package includes one high quality led light designed fit for Whirlpool and many other major brands.
  • This high quality part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid..
  • Replacing Part Number: WPW10515057, W10398007, W10515057, PS11755866, AP6022533..
  • There are two of these lights used in your refrigerator. One is located in the back panel cooler side, the other one is located in the freezer side. The led light located on the ceiling is main led board W10515058, you need to make sure the main board works well before replacing any of the other two ligths, the secondary light are being fed power thru main led light. If main led does not work, the secondary led will not work..
  • Make sure to DISCONNECT the refrigerator before replacing the led to avoid burning the new led..
Check Stock

NEW W10515057 LED Light compatible for Whirlpool, Kenmore, Maytag, KitchenAid, Refrigerators, WPW10515057 AP6022533 PS11755866 by Primeco - 1 YEAR WARRANTY

  • Quality Design Backed by Primeco- 1 YEAR WARRANTY for Peace of mind – The package includes one high quality led light designed fit for Whirlpool and many other major brands.
  • This high quality part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid..
  • Replacing Part Number: WPW10515057, W10398007, W10515057, PS11755866, AP6022533..
  • There are two of these lights used in your refrigerator. One is located in the back panel cooler side, the other one is located in the freezer side. The led light located on the ceiling is main led board W10515058, you need to make sure the main board works well before replacing any of the other two ligths, the secondary light are being fed power thru main led light. If main led does not work, the secondary led will not work..
  • Make sure to DISCONNECT the refrigerator before replacing the led to avoid burning the new led..
Check Stock

Goshfun Motherboard Kit for Repairing and Upgrading of NERF Modulus Regulator C1295 Regulator

  • The modified body can be refit 12v lithium battery..
  • Since the original main body can not modify aluminum battery after changing the flywheel, it is very limited in performance. After the main board is modified, the main board can withstand the voltage of 12-20v, and the lithium battery can be discharged with large rate, which is convenient for subsequent modification of metal flywheel, flywheel cage and other products.
  • Feature-rich: Single / three / burst mode, dart count, empty magazine on-hook, flywheel instantaneous stop / noise reduction control, voltage display and low voltage prompt.
  • Motherboard kit for repairing and upgrading damaged motherboard of NERF modulus Regulator C1295 REGULATOR.
  • Simple installation: the wire is fixed with screw column, can be installed without welding. Wide voltage operation (6-12V). Can hold for most 2s motor.
Check Stock

Household Essentials Basic Sleeve Mini Ironing Board | Natural Cover and White Finish | 4.5\ x 20\ Ironing Surface

  • This high-quality and compact sleeve ironing board provides you with a convenient way to press smaller and hard-to-reach angles of your clothing.
  • The board’s plastic top allows for even distribution of heat and steam The cotton cover is scorch- and stain-resistant.
  • Use to iron face masks, sleeves, collars, hems and other small articles on its own or in conjunction with a regular ironing board.
  • No-scuff leg caps prevent scratches on table and countertops.
  • Set Up 4 62” H x 4 5” W x 20” L Folded 1 5” H x 22 25” L.
Check Stock

PCB007 1X 12 Position Power Distribution Board 2 Inputs 2 x 13 Outputs for DC AC Voltage New

  • 100% Brand new and high quality.Perfect for Railway & Building Layout!This distribution is the ideal solution for the model train to supply all lighting..
  • Operation with DC/AC or digital current.2 input terminals.24 + 2 output terminals..
  • Layout Wire and Lighting.For use with your scale model railroad..
  • Brand:evemodel.Size:Approx.9.5cm or 3.74inch(L),1.87cm or 0.74inch(W)Max. Current via individual outputs: 10 A (observe total current).Max. External operating voltage: 24 V ~ / –.
  • Package included:1 Set Power Distribution Board..
Check Stock

SALAV Iron Professional Clothes Steamer with Vertical Steaming

  • Steam iron, fabric steamer ironing board 3-in-1, with vertical steaming and dry ironing functions, for high efficient professional and heavy duty garment handling..
  • SALAV latest 1800W Double-Heating System(on steam nozzle and main heater) steaming technology, melts even hardest wrinkles in no time..
  • Built-in ironing board can be adjusted to any angle, fits for vertical steaming and horizontal ironing at any angle convenient for you freely..
  • Main body is also designed to used without telescopic poles and base, portable for steaming curtains, household upholstery and more..
  • 1-year warranty. ETL and CETL certifications approved..
Check Stock