ReviewsMainboard Motherboard Graphics Cards

BEYIMEI PCI-E 1X to 16X Riser Card, with 0.6 m USB 3.0 Extension Cable & 6PIN SATA Power Cable - GPU Extender Riser Card - for Bitcoin Ethereum Mining ETH (VER009S,6 Pack)

【PCI-E 1X to 16X Riser Card】: VER009S-PLUS Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs.At the same time used with (ASIN:B094FRYRB3) can provide fast data transmission speed..
【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe..
【Reduce the burden on the motherboard】: the adapter card’s 6PIN interface enhances the power supply, and it can be converted to a SATA port with a SATA to 6PIN line to make the graphics card’s power supply independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected..
【Rugged Cable】: 60 cm USB 3.0 cable for flexible placement of PCI-E devices. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3M without signal attenuation..
【Support System】: compatible with all WINDOWS systems, LINUX, MAC.

Check Stock

GELRHONR SLI Bridge 2 Way,10cm 26pin Flexible Graphic Card PCI-e Connection Cable for Dual Nvidia GPUs Graphic Card Crossfire Interconnect - N Card

✪ CONNECTOR FEATURES：The whole length of the SLI bridge adapter is 10cm, This female to female cable has 26 pins at each end.so that you can connect the graphics cards with farther distance in-between, enable you to separate your cards farther in the case for better heat dissipation..
✪ HIGH QUALITY：This replacement NVidia SLI cable made from the latest flame-retardant material, high quality, solid and flexible, not easy to break.Different from hard Sli bridges whose length must match the card position, this Sli connector is flexible and can adapt to different lengths base on your needs..
✪ Over 16GB/s via rare shielded extreme high speed wires and dedicated power lines for lossless signals at range..
✪ N card Crossfire：Flexible circuit board, which can be bent and the length can be adjusted.Dual graphics crossfire line to enhance the graphics performance, speed.Suitable for ASUS, for MSI Gigabyte and other graphics cards..
✪ If the motherboard has two PCI-E slots, you can use this cable to connect two graphics cards while using. NOTE:It's better to have two graphics cards of the same brand and the same model.To build a crossfire platform, it is best to use two crossfire cables at the same time..

Check Stock

TOTOKA Open Chassis Frame Mining Frame Thickened Motherboard Bracket Fixing Frame Mining Rig Case Frame, Computer Motherboard Case Rack

Strong and durable, full protection of graphics cards and electronic devices, can be firmly superimposed..
Wide body heat dissipation design, greatly increase the distance between the graphics cards, ensure good heat dissipation effect, easy installation and maintenance..
Keep your motherboard extra cool with this opening design. Plenty of room between cards allow airflow..
Keep all cables clean and organized, along with everything in your mining machine..
Made up of the highest quality iron material, with the finest craftmanship.

Check Stock

Ziyituod 6 Pack PIC-E Riser Express Cable VER010S GPU Riser Express Kits ,with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

【VER010S-Plus】VER010S-Plus Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs..
【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe..
【Riser Adapter Card】: Two 6PIN+MOLEX interface to enhance the power supply capacity, so that the power supply of the graphics card is independent of the motherboard, thereby reducing the burden on the connection between the motherboard and multiple graphics cards..
【Rugged Cable】: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation. The 60CM USB cable is soft and stable, and the graphics card can be placed at will..
【WIDELY APPLICABLE】: Suitable for all Window systems, LINUX and MAC..

Check Stock

MLLIQUEA 8 GPU Mining Rig Frame Case, Cryptocurrency Mining Machine System & Platform, Barebone Motherboard for ETH with 6 Cooling Fans, Miner Frame Case with SSD, RAM(Without PSU/GPU)

8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 55mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. Small size, more suitable for mining factories. We can provide 24 hours technical support and no reason to return the product..
Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Six cooling fans, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 6 , 6 PIN cable to (6 + 2) Pin * 8pcs（male to male）, screws package. There are two power connection methods: the built-in power supply requires you to purchase additional female to male cables, and the external power supply can directly use the male to male cables we give away. For detailed wiring, please ref....

Check Stock

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

...(spark), nicehash, minero (os) and other operating systems.) Provide professional technical support.
❤ 3060 graphics card single-card computing power is as high as 48MH/s or more, which perfectly supports graphics card mining ETH, greatly improving the computing power mining function. BTC-X79-5 card mining machine motherboard, supports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards..
❤ X79-5 card mining machine motherboard adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin and more. The noise of the BTC-X79-5 card mining machine is about 55db when running. It runs very quietly and is perfect for home use..
❤ If you want to use other CPU, please use the CPU below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
❤Please note: Please connect the power supply to the 6pin of motherboard 1.3.6 for power supply to the motherboard. Pleas....

Check Stock

Lian Li STRIMER+ TRIPLE 8-PIN GPU RTX 30 Series Extension Cable Only Compatible with GPU RTX 30 Series

Dual PSU Power Supply 24 Pin (20+4) ATX Motherboard Extension Cable, 12 inch/ 30cm..
Allowing you to connect an additional PSU to your ATX motherboard.
Compatible with 24 pin and 20 pin ATX motherboards (1x 24 pin(20+4) male port and....
Both PSU will be powered up by one single motherboard. Use a second PSU to power multiple graphics cards.
Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
Reminder: If there are pins off, you can plug back in the direction of the slot, does not affect the use!.

Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. This motherboard is adapted to the mining rig frame customized for B85/847 sold in our store..
Upgrade Material - Our mining GPU motherboard is made of high-quality steel, which is sturdy and durable, and can be reused. One large CPU cooling plate, super heat dissipation. You can install your own external cooling fan, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the s....

Check Stock

Aluminum Open Air 12 GPU Mining Rig Frame Case Rack Motherboard Bracket Computer Case for Cryptocurrency Ethereum ETH Ravencoin Ergo Swap Bitcoin Miner

Installation instruction video updated, please check it at the bottom of the gallery..
Keep your Graphics Cards extra cool with this open air design. Plenty of room between cards allows airflow..
Professional team design for miner, accelerating the air convection, enhancing the cooling and extending the service life of graphics cards..
Solid aluminium construction, durable and available for repeated addition, fully protecting your GPU and electronic device..
Frame Only, Not include Fans, CPU, GPU, PSU, Motherboards, or Cables. Not Compatible with BTC Motherboard..

Check Stock

(2-Pack) COMeap GPU PCI Express Power Extension Cable PCIe 8 Pin Female to 8 Pin(6+2) Male Adapter 9-inch(23cm)

『Solution』Providing a convenient solution for extending the connection length from PCIe cable to GPU.
『PCIe 8P Extension』PCIe 8 pin female end to plug into the PCIe 8 pin male connector of PCIe cable and 8 pin(6+2) male end to plug into the video graphics card (8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin).
『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA Tesla, etc..
『Parameter』Length(including connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcs, Self-adhesive tape*1pcs.
『Note』This cable was only designed for graphics card (GPU), not motherboard or CPU. It will be damaged and burned once you connect it to motherboard or CPU and we won’t take any responsibility for wrongly using or installing. Please contact us if you have any questions.

Check Stock

Flexible SLI Bridge GPU Cable, VGA Card SLI Flexible Bridge Cable Interconnect Connector 10cm 26pin, for ASUS, for MSI Gigabyte Graphics Cards

【High Quality】The whole length of the SLI bridge adapter is 10cm, made from the latest flame-retardant material, quality hand soldered gold-plated contacts for signal integrity. And the SLI bridge has 26pin interface at each end.
【Adjustable Connector】Flexible circuit board, which can be bent and the length can be adjusted. Dual graphics crossfire cable to improve the graphics card performance, speed. Compatible for NVIDIA Graphic Cards, for ASUS, for MSI Gigabyte and other graphics cards.
【Connection Feature】To build a crossfire platform, it is best to use two crossfire cables at the same time. This replacement NVIDIA SLI cable can replace your old broken original cable. Extreme high speed wires and dedicated power lines can achieve lossless signals at range.
【SLI Bridge 2 Way】It works better for two graphics cards in same brand and same model. A graphics card with two bridging positions, inserting two bridges can achieve a transmission rate of 24bit dual (12bit×2) 400MHz.
【Special Note】Please confirm whether the motherboard supports SLI protocol before purchase. Our SLI bridge is shipped after strict quality inspection. If you have any questions, please feel free to contact us.

Check Stock