ReviewsMakerfocus Esp32

HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board

  • ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..
Check Stock

DORHEA ESP32 Cam WiFi Bluetooth Development Board with OV2640 Camera Module + Micro USB to Serial Port CH340C 4.75V-5.25V Nodemcu for Raspberry Pi - 3 Set

  • The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC..
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications..
  • ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module..
  • The esp32 kit module can work independently as the smallest system..
  • Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions..
Check Stock

3 Pieces ESP WROOM 32 ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

  • Package contains: you will get 3 pieces of ESP-32 2.4GHz dual-mode WiFi development boards, enough for your daily use and replacement.
  • Multiple functions: ESP32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
  • And the entire solution occupies the smallest printed circuit board area.
  • ESP-32 development board is safe, reliable and scalable to various applications, bringing you a lot of convenience.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
Check Stock

DORHEA 10PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding

  • ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding..
  • The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications..
  • ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs..
  • Flash integrated on the module and are not recommended for other uses..
Check Stock

AITRIP 3PCS 30Pins ESP32 Development Board Type-C USB and Micro USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP-WROOM-32 ESP-32 ESP-32S ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board

  • Note: AITRIP Expansion Board ONLY can fit 30pins ESP32. ref asin: B08D5ZD528.
  • ESP32 is a safe, reliable, and scalable to a variety of applications.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Integrated 520-kBSRAM, 448-kBROM16-kBSRAMinRTC.
  • USB driver chip: CH340C, with good system compatibility, higher download speed, and more stability..
  • you will get 3PCS ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board.
Check Stock

UpBright 36V AC/DC Adapter Compatible with Kodak HP-A0601R3 ESP 2150 3250 5300 5500 3/5/7/9 Hero 5.1 6.1 7.1 9.1 1k7602 Printer APD DA-74A36 DA-60A36 Delta EDPA-108BB A LITEON PA-1800-01HK-ROHS 1K2998

  • World Wide Input Voltage 100-240VAC 50/60Hz.OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright New Global 36V AC / DC Adapter Compatible with DC36V Kodak ESP Office 2170 2150 3250 5250 6150 5000 5100 5200 5300 5500 3/5/7/9 Series Hero....
  • Compatible with: Kodak Easyshare ESP Office ESP 3/5/7/9 series ESP-3 ESP-5 ESP-7 ESP-9 ESP3 ESP5 ESP7 ESP9 ESP 3.2 32 ESP3.2 ESP32 2100 2150 5210 5260....
  • Compatible with: APD DA-60A36 DA-18A36 DA-74A36 DA60A36 DA18A36 DA74A36 Asian Power Devices AcBel AD9024 P/N: EADP-108AB A EADP-108ABA PN....
  • Fits: Kodak HP-A0601R3 HPA0601R3 P/N: VP-09500084-000 1K5669 1K5667 1K2866 1K5862.
  • Kodak Hero 3.1, 5.1, 6.1, 7.1, 9.1 91 All-in-One Multifunction....
Check Stock

MakerFocus 2pcs D1 Mini NodeMcu 4M Bytes Lua WiFi Development Board Base on ESP8266 ESP-12F N Compatible NodeMcu Ar duino

  • This is D1 mini, a mini W I F I board based on ESP-8266EX. How to start using Ar duino? Please read the document carefully. The document link is available in the product guide.
  • Ar duino ompatibility. Using the Ar duino IDE for programming..
  • 5V 1A switching power supply (switching power supply）onboard..
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!.
Check Stock

AITRIP 3PCS Type-C USB ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters for Arduino

  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board.
  • Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use..
  • Package: You will get 3 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

ACEIRMC ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE (3pcs)

  • 1.ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
  • 2.Ultra-Low power consumption, works perfectly with the for Arduino IDE.
  • 3.SupportThree Modes: AP, STA, and AP+STA.
  • 5.ESP32 is a safe, reliable, and scalable to a variety of applications.
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock