ReviewsMale Barb Fitting

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....

Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....

Check Stock

ANPTGHT Plastic Hose Barb Fitting 3/8 Barb X 1/4 NPT Male Thread Adapter Connector Pipe Fittings for Fuel Gas Liquid Air Pack of 5

【Material】 Plastic barb connector, made of high-quality PP（Polypropylene） material.
【Size】3/8" Barb X 1/4" NPT Male Thread.
【Product】Fitting connects to hose on one end and has an NPT male connector on the other..
【Features】Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule..
【Use】Suitable for applications in pharmaceutical, food and beverage, laboratory and others..

Check Stock

Dorman 84949 Electrical Switch Modular Mounting Panels Right Center Left, 3 Pack

Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
Fitting connects to tubing on one end and a male connector on the other.
Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
Single-barb design for increased pull-off resistance compared to three-barb styles.
Nickel-plated brass hex nut included for secure fit.

Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..

Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....

Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..

Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Legines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs

Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
Hose barb on one end and male NPT threads on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Hose Fitting SUNGATOR Brass Hose Barb Fitting Adapter 1/4 Barb x 1/4 NPT Male Pipe 4-Pack

【PREMIUM MATERIAL】: SUNGATOR selects high quality solid brass, firm and durable, brass is corrosion resistant and can be used in wet environments, 1/4”barb X 1/4”NPT male pipe, 4 pack.
【DURABLE】: The barb fitting is not a cast product and has a longer service life.
【SUPERIOR THREADS】: Barbed edges provide excellent connection, deeper and smoother threads design makes work easier and more effective.
【FUNCTION】: A barb (or hose barb), which connects flexible hose or tubing to pipes, one side is used to connect hoses while the other side is used to connect to NPT pipes, especially for small rubber hoses and plastic hoses as well as air tools.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).

Check Stock

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
-6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
The barb can use in 3/8" inner diameter fuel hose..
Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

Check Stock