ReviewsMale Elbow Compression Fittings

Elbow Compression Sleeve for Men & Women – Elbow Brace for Tendonitis and Tennis Elbow Relief, Golf Elbow, Joint Pains, Bowling, Weightlifting in Premium Breathable Fabric (1 Piece GREY X-Large)

  • ✅ ELBOW SUPPORT FOR TARGETED CONDITIONS: Whether your discomfort is from exercise, work, or tendonitis, Physix elbow compression sleeve for women & men will help reduce strain, avert achy elbows & damaged tendons, offer general elbow joint rehabilitation, and almost instant relief for tendonitis, tennis elbow & golfer’s elbow arthritis!.
  • ✅ NO-RISK PURCHASE: It’s not easy to look for elbow compression sleeves for men & women that really work! Physix Gear Sport truly cares and will give you nothing less. Our products are shipped from the USA, with a service team right here to listen to you 24/7. So if our compression elbow wrap fails to meet your expectations, contact us and we’ll assist you right away!.
  • ✅ TRUE GRADE COMPRESSION without Blood Flow Restriction: Our elbow sleeves’ Effective Compression applies even pressure across your elbow to help inhibit & recover from tendonitis, inflammation, tennis & golf elbow and other elbow pains. The perfect elbow sleeve weightlifting champions rely on!.
  • ✅ MOISTURE-WICKING & BREATHABLE MATERIAL: Our elbow brace for tendonitis and tennis elbow features a sweat-busting + breathable fabric that keeps elbows dry & odorless, even with prolonged use & even in hot, humid weather!.
Check Stock

Spears 1413 Series PVC Tube Fitting, 90 Degree Elbow, Schedule 40, Gray, 2' Barbed x NPT Male

  • 90-degree elbow for connecting flexible polyethylene tubing to pipe at an angle.
  • Barbed male insert on one end and male NPT threads on the other end for connecting flexible tubing to female NPT threaded pipe.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2609 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

Vent Systems 4\ inch Elbow 90 degree Duct Pipe Connector Flexible Round Tube Ventilation Hose ABS Plastic 100 mm

  • Made of High Quality ABS Plastic and perfectly designed for home improvement, DIY and Trade.
  • Flexible Coupling, Male Fitting for a 4 Inch pipe - Compatible with Round Pipe, Flexible Hose and other pipe, 90 degree elbow.
  • Easy to install - fit perfectly with any other pipe, vent and connector. Push-fit duct and fittings together..
  • Elastic 90 degree Elbow Ducting Pipe Connector is simple to adjust and connect with pipe..
  • Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability..
Check Stock

CNAODUN 10 Pcs Push-to-Connect Fittings 3/8 Inch Tube OD x 1/4 Inch NPT Thread Pneumatic Male Elbow Quick Connect Air line fittings…

  • ♥【What You Get】3/8" Od x 1/4" NPT Thread Push to Connect Fittings,10pcs in total.Body Style: Male Elbow.
  • ♥【High Quality】These air fittings are made of high quality plastic and copper ,are widely used for automatic industry, workshop equipment, auto repair ,decoration spray paint, woodworking, dental equipment, etc..
  • ♥【Working Parameters】Working Pressure:0~145psi.
  • ♥【Wide Range of Applicable Tubes】These fittings can be used for a wide range of pipes, and can be used for PU / PA / PE / PVC pipes..
  • ♥【Easy Application】Plug-in design, easy installation, clear threads, strong sealing..
Check Stock

3/8\ OD Tube 316ss Single Ferrule Elbow Fitting Parker 6-6 EBZ-S

  • Package Content : 30 PCS(Include Nut And Ferrule).
  • Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale..
Check Stock

Eaton Aeroquip 2062-8-6S Steel Flared Tube Fitting, 90 Degree Elbow, 9/16\ Male JIC x 3/4\ O-Ring Boss Male

  • 90-degree flared tube fitting elbow for connecting tubes at a 90-degree angle.
  • Male 3/4-16 SAE O-ring threads on one end and male 9/16-18 JIC threads on the other for use with 3/8" OD tubes.
  • Zinc-plated steel for strength, durability, and resistance to corrosion.
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different....
Check Stock

MANUEKLEAR Elbow Sleeves for Weightlifting, Elbow Compression Sleeves for Men, Adjustable Elbow Wraps for Weightlifting, Supportive Elbow Straps Brace for Lifting Weight Bodybuilding Powerlifting White XL

  • 【3-SECTION SEGMENTED COMPRESSION】– Unlike traditional elbow sleeves for weightlifting, our 10-stage segmented compression elbow sleeves feature three adjustable compression bands, allowing you to easily adjust the perfect and most appropriate size and compression for the best protection based on the various sizes of your upper arms, elbows, and forearms as well as your training needs. Additionally, the adjustable elbow pads improve blood circulation to increase training results..
  • 【DURABLE & COMFORTABLE MATERIAL 】– The adjustable elbow sleeves weihghtlifting are made of a high-quality polyester fabric and covered with stretch latex fibers, allowing them to withstand severe pulling and rubbing without being damaged or breaking. The unique way the fabric is woven also ensures optimal breathability and comfort, so that our compression elbow pads do not rub or irritate the skin, allowing you to practice without distraction..
  • 【WIDE SIZE RANGE FOR MOST PEOPLE 】– M MANUEKLEAR elbow straps for weightlifting are available in 4 sizes options. These 4 sizes cover most arm dimensions for men as well as fitness enthusiasts, and the adjustable design makes this elbow compression sleeves for men more flexible and suitable for more specific body types....
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

Breg Tennis Elbow Strap

  • ✅ ELBOW PAIN RELIEF: If you suffer from Elbow Tendonitis, either Tennis Elbow ( Lateral Epicondylitis ) or Golfer’s Elbow ( Medial Epicondylitis....
  • ✅ HIGH QUALITY: Elbow support strap velcro is strong enough,all the stitching and seamwork is done very well and the compression pad in the brace is....
  • ✅ ADJUSTABLE DESIGN: Adjustable Elbow Strap Equipped with two adjustable and improved velcro straps, it allows you to tighten or loosen at your....
  • ✅ TARGETED COMPRESSION: Lined with a firm foam padding, the elbow brace contours to the arm for targeted compression therapy. The compression brace....
  • ✅ A VERSATILE BRACE FOR ANYONE IN NEED: This tennis elbow strap can be definitely used by any sportsperson who suffers from tendonitis or who wants....
Check Stock

2 Pack - 316 Stainless Steel 1/4 NPT Female to 1/4 NPT Female Straight Hex Coupler/Coupling for Air, Liquid or Hydraulic Fitting - Industrial Air Tool Hose 1/4 Inch Coupling

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Fitting has a JIC flared male connector on one end and an NPTF male connector on the other.
  • Made of forged steel for weldability, rust resistance, and durability.
  • Operating temperature ranges from -63 to 400 degrees F.
  • Meets SAE standard J514 for quality assurance.
Check Stock