ReviewsMale Header

iFlight Mirco BEC 5V 3A / 12V 2A Output Adjustable Step-Down Voltage Regulator 2-6S for FPV Quad Drone Built 3pcs

  • ★ Product Type: High quality male and female housing and 2.54mm female pin header connector compatible with jst-xh connector Kit..
  • ★ Temperature Range: -25 Degree Celsius to 85 Degree Celsius(including temperature rise in applying electrical current)..
  • ★ Easy to use: This set of connector is easy to install, Just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • ★ Widely Application: widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers,....
  • ★ Package include: This set include JST-XH 2.54mm Female Pin Connectors 320PCS,2/3/4 Pin male and female housing each 20PCS,5/6 Pin male and female....
Check Stock

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

  • Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
  • It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
  • 4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
  • ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
  • PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..
Check Stock

DEPEPE 30 Pcs 40 Pin 2.54mm Pin Headers Male and Female Header Pins PCB Board Headers for Arduino Prototype Shield

  • 620PCS Dupont Connector Kit: Dupont style 2.54mm connector kit consists of a selection of housings as well as male and female crimp pins to make....
  • The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal....
  • Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male....
  • The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low....
  • Applications: Dupont connector serves as electronic connectors for making custom wires for FPV, drone, breadboard, 3D printer, robots, etc..
Check Stock

Vilros 40 Pin Hammer-in Pin Header for Raspberry Pi Zero with Install Rig---Easy Pinheader Installation Solution for a Raspberry Pi Zero----No Soldering Required

  • Simple and easy no solder solution to install a pin header on a Raspberry Pi Zero & Zero W, Zero W 2..
  • High Quality acrylic base & metal striking plate for a sturdy easy install without the need to fasten bolts or worry about breaking the rig during installation.
  • Includes one 40 pin male header- additional headers can be purchased separately to be reused with the rig.
Check Stock

LINKUP - [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

  • Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
  • including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
  • Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in ....
Check Stock

Vilros Raspberry Pi Zero- Zero W Compatible Case (Black)

  • Features 3 Covers, Sealed Open GPIO and Camera Module Compatible.
  • Includes a 40mm Raspberry Pi Zero / Pi Zero W Compatible Camera Cable and 2×20-pin Strip Dual Male Header.
  • Case ONLY Does NOT include Raspberry Pi Board Or Cables.
Check Stock

Micro Connectors F04-RGB01-30 30cm RGB Extension Cable

  • Compatible with 5050/3528 4-pin RGB LED strip lights.
  • Works with 4-pin RGB or 5-pin RGBW header.
  • Flexible PVC material for easy routing in tight spaces.
Check Stock

Phanteks 3 Pin Digital RGB LED (PH-CB-DRGB3P_MB) 600mm Extension Adapter Cable for Motherboard - Black

  • 600mm in length and flexible for easy cable routing and management.
  • Synchronize and control using Phanteks DRGB cases or compatible addressable RGB motherboards.
  • The cable features two connectors one for Phanteks DRGB products and the other for third party addressable RGB products.
  • Compatible with Asus MSI Gigabyte and Asrock addressable RGB motherboards.
  • Connector 1 x 3 Pin adapter (Female 5V Data X Ground) to MB DRGB PIN header (Male) 1 x 3 Pin adapter (Male 5V Data X Ground) to split another DRGB adapter 1 x 3pin connector (Female 5V Data X Ground) to PHANTEKS DRGB Device.
Check Stock

LOGISYS Computer CLK15RD 15 Red Deluxe Sound Activated CCFL Kit

  • RedCold CathodeCase Light Kit General Features: 15-inch Redcold cathodecase light.
  • Slimcold cathodetube can be installed anywhere in case.
  • I/O header with power switch and sound sensitivity adjustment Very low heat output.
  • Connects via 4-pin power connector (Male/Female passthrough) Regulatory Approvals: CE.
Check Stock

risingsaplings 2pcs DC 12V Current 0.4A Current Mini Electromagnetic Electric Drawer Lock Solenoid Control Lock for Door Access Cabinet Lock Farm School Hotel Design Slim Tongue 27X29X18(mm)

  • Length, Width and Height: 27mmx28mmx17.6mm..
  • With 2pin(2.54mm) male header wire, cable length is about 105mm(not include pin header)..
  • Small size, energy saving, light weight and responsive..
  • Applicatin for being installed in the escape door, fire door electronic controlled system,smart lockers, vending machine, electromagnetic lock, electric control lock and all kinds of doors and windows cabinets etc..
Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

  • Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
  • Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
  • Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
  • Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
  • Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.
Check Stock