ReviewsMale Hose Fitting

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Master Airbrush Brand 100 Pipette Eyedroppers for Liquid Transfer and Airbrush Paint

Master Airbrush Brand Airbrush Fitting Conversion Adapter for Badger Airbrushes.
Converts a Badger airbrushes male M5 0.5 mm thread size to standard 1/8" BSP male thread size for easy connection to 1/8" BSP air hoses.
Adapter has 1/8" BSP male threads on the outside and Badger size female threads on the inside.
The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata.

Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
If leakage, please put teflon tape on the male threads of your wand or other products..
Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

Jabsco 34060-0130 Marine Engine Oil Drain Hand Pump (10.25' Long, 1.25' Diameter),Brass

Screws onto threaded male 3/4″ garden hose fitting on top of dipstick tube.
Complete with 2′ of 1/2″ ID drain hose.
Fitting: connection for 3/4″ GHT male thread.
Dimensions: 10-1/4″ long x 1-1/4″ diameter..

Check Stock

SHINESTAR 1/2-Inch Natural Gas Hose (24-Feet) with Quick Connect Fitting, Propane to Natural Gas Conversion Kit, Perfect for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance

[ Works Perfectly ] With a 3/8" female x 1/2" male adapter, you can use natural gas to supply propane gas appliance. Perfect for grill, patio heater, pizza oven, and more..
[ Perfect for ] The hose works for Blackstone, Weber, Charbroil Grill, and more NG appliances.
[ Enough Flow ] 1/2-inch inside diameter hose, provide adequate gas flow for grills and other gas appliance..
[ Easy to Install ] With quick-disconnect brass fittings on both ends make it easy to attach and remove this gas hose as needed..
[ Package ] Includes 24ft 1/2″ ID hose (1/2" male quick disconnect plug X 1/2" female flare), 1/2" quick connect/release fitting, 3/8" female x 1/2" male fitting..

Check Stock

Cen-Tec Systems 94225 Shop Vacuum 20 Ft Whip Hose and Power Tool Adapter Set for Dust Collection, Black

... The 1. 0” interior diameter adaptor press fits on the end of the 1” whip hose end and can fit over male power tool or shrouds with a 1. 0” male connection. The 1. 0” adaptor has four concentric rings to press fit firmly tonto the tool and hold during use. Some tools and shrouds accept this same fitting as a 1. 40” tapered male connection where to soft TPE material holds firm.
The second soft 1. 50” TPE adaptor for mating with major power tools and shrouds equipped for a 1. 50” hose connection. The 1. 50” adaptor will press fit onto either the shop vacuum hose swivel adaptor or onto the 1” whip hose end fitting as deemed appropriate for the application.

Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.

Check Stock

NQN 2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare

【Specification & parameters】RV Propane Regulator: Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, RV Pigtail Propane Hose: 1/4" Male Inverted Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainless steel braided. Propane Hose and regulator with CSA Certification ensure air tightness 、stability.
【2 Pack 18''Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak.
【Application Scenarios】This 2-Stage Auto Changeover LP Propane Gas Regulator for RV , s....

Check Stock

2 Pieces M22 Pressure Washer Hose Coupler,M22 Metric Male Thread Fitting 15mm Male X 15mm Male Pressure Washer Hose Extension Adapter, Solid Brass, 4500 PSIconnectors

Warm Reminder - This is a 15mm diameter male connector, can't compatible for some electric pressure washer and hose which equipped with a 14mm fitting . Please check that first, or send the brand and model to us to confirm it.nt brass with precision process, easy connect and disconnect..
Pressure Washer Hose Extender - 15mm male X 15mm male to extending your hose to longer length, you don't have to move around your house and driveway, get done your clean work faster!.
Premium Solid Brass - High-quality SOLID BRASS and rustproof coating, outstanding ductility at high temperatures, low magnetic permeability. Much thicker and heavier, connected with hose thread firmly without water leak or pressure loss, More durable..
TOP Performance - Up to real 4,500 PSI working pressure, perfect for almost all the M22 pressure washer hose?can't compatible for some electric pressure washer and hose which equipped with a 14mm fitting ..
100% service and technical support, If you need any help, please feel free to contact us and our customer service team. If you are not sure that your pressure washer matches it or not, please feel free to contact us..

Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock