ReviewsMale Nipple Fittings For Air Pipe

CEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack

  • Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
  • 1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32~140°F.
  • 1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

Universal 1/8 NPT Female Connector and 8mm Male Plug Fill Nipple Quick-Disconnect Set, Stainless Steel Remote Line Male & Female Set for PCP Foster Paintball Airsoft Air Gun Tool

  • Material - Made of high-quality stainless steel, they won't rust. Rated to 5000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
  • Accuracy - NC machining, accurately, 1/8 NPT(National Pipe Thread) Inner Thread and Universal 8mm Male Plug Refill Nipple. (The Male Plug Comes Without a Valve Inside.).
  • Easy to Operation - Simply connect each fill adapter to the air tool fittings, high pressure resistance,this is one of the needed items to have in your parts kit..
  • Quick Connect Adapter - Fit for 1/8 NPT thread. It's Time to Replaced Your Brass and Galvanized Connectors. The Best 8mm Quick Release QD You Could Ever Get!.
  • Application - Easy to Install. Fit for new replacements on your remote coil, fill station ect..
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

1/4 NPT Plug Pipe Plug Fitting Countersunk Thread Internal Hex Head Style Male Plug (1/4 inch Brass Plug, Pack of 5)

  • SIZE -- Brass 1/4 inch NPT pipe fitting plug, pack of 5..
  • ACID-RESISTANCE & ANTI-CORROSION MATERIAL-- Internal Hex Thread Male Plug is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.achinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • APPLICATIONS -- Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These pipe plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • HIGH STRENGTH AND HARDNESS -- NPT Male Pipe is high strength and hardness ,make it last longer. Reduces the trouble of leaking and leaking during your use..
  • CUSTOMER SERVICE -- Professional factories produce quality threaded pipe. Every detail reflects a strong texture performance. Fast Delivery, we guarantee the quality before the item ships. 30 Days Free Refund..
Check Stock

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

  • MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
  • CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
  • ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
  • DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
  • 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
  • Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
  • Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
Check Stock

SUPPLY GIANT OQCM2025-5 Nipple pipe, 2 in. x 2-1/2 in, Black, 5 Pack

  • PIPE NIPPLE TYPE: pipe nipple fitting male NPT (National Pipe Thread) thread made of superior coating steel for commercial use residential application and all your DIY projects. Black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: nipple joins two pipes or extending length.
  • HIGH QUALITY: durable pipe steel material manufactured using advanced technology.
  • RATING APPROVAL: meets ASTM and ANSI standards.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture shelves and accessories.
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

  • 【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
  • 【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
  • 【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
  • 【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
  • 【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.
Check Stock