ReviewsMale Pipe Plug

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

BIGFOOT RV Water Hose 25 ft - Drinking Water Hose for RV Camper, Boats - Food Grade Hose - Lead, Phthalate, BPA Free Hose - Anti Kink, Lightweight Water Hose - Purple, 5/8inch Diameter, 25 ft Long

  • ...hich with water supply system, by blowing out water from water lines/plumbing or pipes. Very easy and convenient anti-freezing method to use and help to reduce the use of antifreeze..
  • Universal threaded connection - Our winterize blowout adapter is standard threaded connection in most cases. Designed with a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread. Easy attach air line to water lines or hose system to make a nice winterization solution..
  • High quality product - The winterize blowout adapter is made of brass, strong ruggedness and good durability, very safe to use and not easy to break or deform, can serve you longer time.
  • Easy to use - Screw the water pipe to the female thread side and connect the quick plug to the quick coupling inside the air compressor line, then turn on the air compressor and turn around the ball stem to open or close and adjust the air flow rate to blow dry water from the water pipe..
  • Widely Application - This quick winterize adapter is suitable for many systems (such as RV, camper, boat, travel trailer and so on that the vehicle with a water supply system) blow out or winterize with a male garden hose thread..
Check Stock

DEUTSCH 80 PCS DTP 2-PIN Gray Connector KIT 10-12AWG Stamped Contacts (Made in USA)

  • Material: ABS + Copper Wire + Plastic Pipe.
  • Deutsch DT DTP 2 pin Male Female Connector Adapter, Compatible with most LED work lights, LED light bars on the market.
  • Package include: 2 set Wiring Harness (not include lights).
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Air Compressor Pressure Regulator with Dial Gauge, 0-175 PSI Air Gauge for Air Compressor and Air Tools (Four Way Valve)

  • Four Way Valve: This air pressure regulator has four holes. Three holes of 1/4″ NPT and one hole for 1/8″ NPT..
  • Package included: 1 x Air Pressure Regulator (Four-way valve), 1x Dial gauge for the 1/8″ , 1 × 1/4″ × 1/4″ Male Pipe, 1 × Nickel-plated Iron Air Plug, 1 × Nickel-plated Iron Air Coupler, 1 ×Thread Pipe Plug, 1 × Hex Wrench, 2 × portable Teflon tapes..
  • Max pressure: 175PSI, 12BAR. Practical and durable, easy to install and disassemble..
  • With the barometer: This regulator comes with a dial gauge meter, it can be set and read the data..
  • With the valve knob: can according to need to adjust air pressure. In use it can help to save electric energy..
Check Stock

RV Winterize Blowout Adapter with 1/4 Quick Connect Plug and 3/4 Garden Water Hose Threading Winterize Quick Adapter with Ball Valve for Boat Camper Trailer Sprinkler Systems Irrigation Kit Fitting

  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with RV Winterize Blowout Adapter, drop us a....
  • ✔ HIGH-QUALITY MATERIAL: This RV Winterize Blowout Adapter is made from brass which is durable and it can withstand high temperature. Beside brass....
  • ✔ KEY PURPOSE: This tool is perfectly designed to winterize garden hose, sprinkler systems, faucets (such as RV, camper, boat, travel trailer and so....
  • ✔ STANDARD SIZE: 1/4 inch male air compressor quick plug to a Female 3/4 inch garden hose inner thread and 1/4 Inch Male Quick Connecting Plug and....
  • ✔ EASY TO USE: Step one: screw the water pipe to the female thread side,connect the quick plug to the quick coupling inside the air compressor line,....
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

WINKA Deutsch DT DTP 4 pin Male Female Wiring Harness for LED Work Light/LED Work Light Bar Replacement Connectors

  • Material: ABS + Copper Wire + Plastic Pipe.
  • Deutsch DT DTP 2 pin Male Female Connector Adapter, Compatible with most LED work lights, LED light bars on the market.
  • Package include: 2 set Wiring Harness (not include lights).
Check Stock

TOMALL Deutsch DT DTP 2 pin Male Female Wiring Harness for LED Work Light/LED Work Light Bar Replacement Connectors

  • Material: ABS + Copper Wire + Plastic Pipe.
  • Deutsch DT DTP 2 pin Male Female Connector Adapter, Compatible with most LED work lights, LED light bars on the market.
  • Package include: 2 set Wiring Harness (not include lights).
Check Stock

Mayouko 11PCS 3/8 Drive SAE Pipe Plug Socket Set Tapered Male Square Drive Chamfered Female Square Drive CR-MO

  • Includes: 11pcs 3/8"drive SAE pipe plug sockets: male: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8".
  • female: 1/4", 9/32", 5/16", 11/32", 3/8".
  • Made of impact grade chrome molybdenum steel with black phosphate finish..
  • Tapered male square drive and chamfered female square drive aligns socket to fastener quickly..
  • The storage hard case is lightweight which is convenient for storage and carry..
  • All Mayouko Tools meet or exceed ANSI & DIN performance standards. It comes with 1 year quality guarantee..
Check Stock

2 Way Connection Heavy Duty Air Chuck Set-1/4 Inch Female NPT Closed Ball tire Chuck Dual Head Air Chuck and Standard Male Quick Plug Tire Air Fill Kit for Tire Inflator Gauge and Air Compressor

  • ➤【What in the box】 Includes 1 pcs dual head closed flow air chuck, 1 pcs ball head air chuck, 1pcs male quick plug/fitting, 1pcs teflon tape. Both air chucks with closed flow air chucks, which will shut down the air flow and air flows only the chuck engaged with tire valve cores. Wide applicable and convinient for inflating schrader valve of most bike, motorcycle, car, truck, etc..
  • ➤【Solid and Durable】 Constructed with high quality solid metal alloy and brass, offers more hardness and durability, corrosion resistance and wear resistance, which is a perfect choice no matter for business or household use, will serve you faithfully for years..
  • ➤【2-way Easy Connection】 Both air chucks featured a female 1/4"NPT thread for easily connected to air lines, air compressor or tire inflator gauges for tire inflation. Also included a standard 1/4" male quick plug, for easy and swiftly connecting to air lines' female quick couple..
  • ➤【Dual Head Air Chuck】 Featured with 1/4" inch female national pipe thread, extended metal alloy air rod, 2-in-1 dual head closed flow air chuck, allows for inflating easily on awkwardly located tie valves, easy push or pull operation, quickly tire air fill with no air leakage..
  • ➤【Ball Air Chuck】 Featured with ....
Check Stock