ReviewsMandrel For Flap Wheel

SCOTTCHEN Airway Buffing Wheel Extension Shaft 2-1/4 L Angle Grinder Buff Extender Kit 5/8 -11 Threads Arbor Extended Adapter Steel - 1set

【Application】This 5/8" Shank Cotton Buffing Polishing Wheel Extender suitable for Angle Grinder with 5/8"-11 threads mandrel and fit for polish....
【Function】This 5/8" Buffing Wheel shaft extender is used for extend the mandrel length then can fit thicker buffing wheels /airway buffing wheels,....
【High Quality】This 5/8" Buffing Wheel extension’s screw shaft and washer are made of firmness steel, the threads tube is made of aluminum, which....
【Excellent Effect】This buffing adapter is good effect to extend the shaft length of angle grinder and make your buffing work more easy and....
【Dimension】Threaded shaft dia x L: 5/8” x 1-7/8”, threaded tube ID x OD x L: 9/16” x 15/16” x 2-1/4”, Washer dia x thickness: 1-5/16”....

Check Stock

Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105

High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..

Check Stock

Dremel 687-01 52-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray

Ideal for cutting, sanding, polishing, grinding, engraving or carving. The Dremel 52-piece General Purpose Accessory set is the complete start-up kit you need to complete a wide range of projects.
Accessory set includes a reusable storage case for easy organization of the included bits.
Carving/Engraving accessories: 194 1/8" Carving Bit (x1).
Grinding/Sharpening accessories: 952 3/8" Aluminum Oxide Grinding Stone (x1), 85422 25/32" Silicon Carbide Grinding Stone (x1).
Cutting accessories: 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel (x1).
Cleaning & Polishing: 421 Polishing Compound (x1), 414 1/2" Felt Polishing Wheel (x2), 429 1" Felt Polishing Wheel (x2), 403 3/4" Bristle Brush (x1).
Sanding accessories: 409 15/16" Emery Cut-Off Wheel (x36), 407 1/2" Drum Sander (x1), 408 1/2" 60 Grit Sanding Band (x1), 432 1/2" 120 Grit Sanding Band (x2) Includes 401 Mandrel (x1) & 402 Mandrel (x1).
USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..

Check Stock

Cutting Wheels for Rotary Tool, Diamond Metal Wood Cutting Wheels and Drill Cutting Disc with 1/8\ Shank and Resin Cutting Off Wheels with Mandrels for Wood Metal DIY Craft

Mini Rotary Tool Kit: 20 resin cutting wheels, 10 diamond cutting wheels with 2pcs (1/8'' /3mm) Mandrel, 6 HSS Cutting Saw Blade Discs with 1pcs (1/8'' /3.2mm) Mandrel, 1pcs For Circular Saw Blades (1/4'' /6mm) Mandrels, 2pcs For Resin Cutting Wheels (1/8'' /3mm) Mandrel..
Diamond circular saw blade size： 22mm (7/8'')，suitable for cutting gems, glass and ceramics..
The wood cutting saw blade discs are made of high speed steel and are 22mm (7/8''), 25mm (1''), 32 mm (1-1/4 ''), 35mm (1-1/2 '' ), 44mm (1-3/4''), 50mm (2''), suitable for cutting wood, plastic, copper, laminate and aluminum..
Resin cutting wheel ： 32mm (1.27''), suitable for cutting metal. Do not use too much force when installing the resin cutting piece..
Suitable for most power rotary tools. The rotary cutting wheel set is suitable for cutting wood, plastic, gemstone, glass, ceramic, stone, aluminum and copper. The mini rotary tool is suitable for DIY projects and the home hobbyist..

Check Stock

545 Diamond Cutting Wheel 22mm 25pcs with 402 Mandrel 3mm 5pcs and Screwdriver for Rotary Tool

APPLICATION: Designed for rotary tools and replacement EZ545/544 lock cut off wheel..
HIGH QUALITY AND DURABLE: The alumi/num oxide cut off discs are thin and sharp. It is completely coated with fine diamond particles..
MULTI-PURPOSE: This diamond grit cutting wheel are suitable for doing DIY, cutting, sawing, carving, sharpening and filing hard..
ATTENTION: For your safety, please must wear gloves and goggles and be care around spark when using mandrel diamond cutting tools. It may become very hot when cutting, add some water to keep it cool..

Check Stock

Yutnqin 69Pcs Abrasive Wheel Buffing Polishing Wheel Wire Brushes Set for Rotary Tool Accessories,Shank 3mm Mini Brush Polishing Kit,for Power-Operated Grinders

Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on ceramic,wood, hardened steel, cast iron, stainless steel and so on.High efficiency, low cost,good wear resistance, durable and practical..
These polisher abrasive buffing wheel are used for Dremel DIY.Widely used in derusting, grinding, sanding, deburring and stripping residue..
Package include:40pcs scouring pad mini-brushes,24pcs stainless steel wire brushes,5pcs flap wheels,Total 69pcs..
Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
Buffing wheels diameter:Shaft is 3mm (approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Dremel Rotary Tools, Polishers, Hand Drill etc..

Check Stock

Benchmark Abrasives 3\ Quick Change Zirconia Flap Discs - 10 Pack (40 Grit)

QUANTITY: This is a pack of 10 premium zirconia quick change flap discs..
DIMENSIONS: 3" Diameter with a Male R-Type backing pad.
APPLICATIONS: Zirconia discs provide a very good cut rate to cost ratio. They are the go-to choice on carbon/mild steel applications. You can also use them on stainless steel, aluminum and other alloys..
USE: Our QC discs are made for use on a die grinder and should be only be used with the proper mandrel. 3" discs should be used with a 3 inch mandrel..
INFO: Our discs are made with a special, self-sharpening zirconia grain that are designed for aggressive stock removal, enhanced surface quality and long life..

Check Stock

100pc 1/8\ Shank Rotary Tool Accessory Set for Dremel (Sanding | Polishing | ...

Universal fit for all rotary type tools including Dremel | 1/8th Shank.
Sanding Band, Rubber Mandrel for Sanding Band, Fiber Glass Cutoff Wheel, Abrasive Wheel,.
15pc Soft Wool, 9pc Pink Aluminum Oxide, 9pc Green Aluminum Oxide, Polishing Woolen Wheel.
30pc Soft Wool, 10pc Hard Wool, Silicon Cutoff Wheel, Aluminum Oxide Cutoff Wheel,.
Stainless Steel Brush, Mounted Abrasive Point, Diamond Burs, HSS Burs/ Drills, HSS Burs/ Drills.

Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..

Check Stock

Dremel EZ688-01 EZ Lock Rotary Tool Cutting Discs Accessory Kit- Cut-Off Wheels – Plastic, Metal, and Thin Cuts, 11 piece,As the picture shown,Medium

The 11-piece set includes 100% Dremel EZ Lock accessories ideal for cutting including soft & hard metals, wood, plastic, ceramic, drywall and more..
Kit includes the patented EZ Lock accessory system allowing for quick and easy accessory changes. EZ Lock makes accessory changes 6X faster than using a standard mandrel..
Cutting accessory kit features the EZ456 Metal Cut Off Wheels reinforced to last 2X longer than current fiberglass-reinforced wheels..
Includes a reusable storage bins for easy organization of the included cut-off wheels..
Cutting accessories: EZ476 1-1/2" Plastic Cutting Wheel (x3), EZ409 1-1/2" Thin-Cut, Cutting Wheel (x3), EZ456 Metal 1-1/2" Cutting Wheel (x4).
US-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..

Check Stock

Diamond Cutting Wheels + Burs For Dremel Rotary Tool Glass Stone Tile Cutter 545 Cut Off Disc Masonry Ceramic Concrete Notching Die Grinder Bits 35pc + 6 Mandrels

Turn your Dremel rotary tool into a powerful cutting machine with the 11-piece EZ Lock Cutting Kit. Compatible with all Dremel Rotary Tools..
SMOOTH CUTS: The cut-off wheels included in the kit have been specially curated to perform all cutting applications, ideal for cutting in either metals or plastics..
QUICK ACCESSORY CHANGE: Variety of EZ Lock cutting wheels. The patented Dremel EZ Lock system makes accessory changes 6X faster than using a standard mandrel..
COMPACT CASE: Accessory set includes a reusable storage case for easy organization of the included bits..
KIT CONTENTS: EZ409 1-1/2" EZ Lock Cut-Off Wheel (x3), EZ456 1-1/2" EZ Lock Cut-Off Wheel (x4), EZ476 1-1/2" EZ Lock Cut-Off Wheel (x3), EZ402 - EZ Lock Mandrel (x1).
USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..

Check Stock