ReviewsManifold Air Injection System

G1/4 Threaded Pneumatic 4 Way 7 Port Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting (Pack of 2)

  • Operating Temperature: 0 - 60 Degree Celsius.
  • Air cylinder manifold is the starting points for air cylinder systems. Can be mounted in line or at a take-off point easily with the G1/4 diameter threaded hole design..
  • It takes one row of air from a pump, air cylinder, compressor, vacuum engine or other such system and splits it into many..
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

  • SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
  • WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
  • features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
  • DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
  • EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
  • SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.
Check Stock

Platinum series air injection iron sulfur removal filter system

  • Abundant flow water, platinum 10 aip10-25sxt air injection system.
  • Platinum 10 system, with filox brand filter media.
  • Remove iron up to 27 ppm, sulfur up to 10 ppm, manganese up to 6 ppm.
  • Air injection creates pocket of air to super oxidize your water for optimal filtration.
Check Stock

AFWFilters Platinum 10 air injection iron, sulfur removal filter system

  • Abundant Flow Water, Platinum 10 AIP10-25sxt air injection system.
  • Platinum 10 system, With Filox (Mang-Ox) filter media.
  • Air injection creates pocket of air to super oxidize your water for optimal filtration.
  • Remove iron up to 27 ppm, Sulfur up to 10 ppm, Manganese up to 6 ppm.
Check Stock

Premier Whole House AIO Air Injection Oxidizing Well Water Filter System Fleck 2510SXT 10T-FE | Removes Iron Sulfur and Manganese

  • Perfect for Well Water: Filtration with Air injection Oxidizing Whole House Water System.
  • System is equipped with a Fleck SXT air injection control valve, 1” by-pass valve (or 3/4" by request), black Structural mineral tank and all....
  • Can remove up to 8 ppm Hydrogen Sulfide and up to 7 ppm Iron. A daily backwash will remove accumulated iron and replenish the filter media bed. The....
  • Lower required backwash flow rates and less frequent backwash frequency reduces the amount of water used by the backwash cycle..
  • Easy to install system offers air injection, oxidation, and contaminant removal all within a single tank. This minimizes space requirements, reduces....
Check Stock

Durawater Air Injection Iron Eater Filter. Removes Iron, Manganese, H2S. Black Series

  • DuraWater, Black Series HD Digital air injection system.
  • Black Series system, for best removal iron 12 ppm,.
  • Remove iron up to 12 ppm, Sulfur up to 10 ppm, Manganese up to 2 ppm.
  • Easy to install yourself with our instructions and some basic plumbing skills.
  • Air injection creates pocket of air to super oxidize your water for optimal filtration.
Check Stock

OTC Water Pump Holding Tool

  • ...tic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage..
  • A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time..
  • Thermometer uses stainless steel material, with scale range 0 - 200℃(32 - 400℉). Blue plastic case k....
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • ...r damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help radiator purge and coolant refill. Please check your radiator opening size before bidding, there are only 32mm 35mm 40mm 45mm, 4 sizes adapters.
  • EASY OPERATION: Completely discharge the old coolant and trapped air first. Use the adapter or work with a suitable adapter sleeve to seat on the radiator opening, rotate the golden knob to seal. Connec....
Check Stock

PHITUODA 1\\/2 3 Ways 6 Ports Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting with Pipe Sealant Tape - Pack of 2

  • *Package Included: 2 x Air Hose Manifold Block, 2 x Pipe Sealant Tape. Position: 3 Ways. The number of Threaded Ports: 6 Ports. Threaded Port Dia: 1/2" BSPT..
  • *Premium Material: The manifold body is made of high corrosion-resistant anodized aluminum with a sky blue brushed nickel finish, which makes it not easy to deform, more durable, and 50% lighter than standard fittings..
  • *Practical Design: The operating pressure is 0 to 1MPa / 145 PSI. Guaranteed pressure resistance is 1.2MPa / 175 PSI. The max working pressure is 2MPa / 300 PSI. The working Temperature is 32 - 140 ℉ / 0 - 60 ℃..
  • *Ideal Application: Manifold Block takes one line of air from a pump, air cylinder, compressor, vacuum engine, or other such system and splits it into many of them. All ports are in the same size so that you can use it as a 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirement..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!.
Check Stock

Air Lift 72000 Wireless Air Leveling Compressor

  • Easiest installation of air compressor for air springs ever with no lines or wires to the cab.
  • Wireless handheld unit for convenient operation in or outside vehicle.
  • Includes compressor and manifold and control box.
  • Inflate and deflate each air spring independently to different pressures perfect for users with uneven or top-heavy loads. With two user-defined....
  • Exclusive two way communication for advanced air system diagnostics.
Check Stock