ReviewsManifold Blocks

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

Carburetor Intake Manifold Boot,for Yamaha Big Bear 350 Yamaha Warrior YFM 350 YFM350 1987-2004 ATV Carb, by NAKAO

  • ➤[Replace]: Replace your old cracked and broken intake boot. Perfectly connects the carburetor and the engine, provides new power for better operation Replace Part Number：3HN-13586-02-00, 3HN-13586-01-00..
  • ➤[Fitment]: This Carburetor Intake Manifold Boot Fits for Yamaha warrior 350 YFM350 1987-2004, Yamaha MOTO-4 350 YFM350 1987-1990, Yamaha MOTO-4 350 YFM3501992-1995, Yamaha Big Bear 350 YFM350 4WD 1993-1996,Yamaha Big Bear 350 YFM350 2WD 1996-1998, Yamaha Kodiak 400 YFM400 4WD 1996-1998, Yamaha wolverine 350 YFM35F 1995.
  • ➤[Installation]:This Carburetor Intake Manifold Boot installation is super easy and Direct fitment and perfect replacement,meets or exceeds OEM standards.fit for warrior 350 intake boot, yamaha warrior intake boot, warrior 350 intake, yamaha intake manifold, wolverine intake boot, warrior 350 parts, warrior carb boot, banshee intake boots, banshee carb boots, intake manifold, efi yamaha warrior 350 part, yamaha warrior banshee parts, yamaha warrior carburetor, intake manifold rubber boot.
  • ➤[Package include]: 1x Intake Manifold, 1x Carburetor O-Ring ,2x spring pads , 2x Bolts, 2x Washers, 2x Nuts. please check it befor carefully to make sure it is what you need..
  • ➤Providing high quality and professional parts with great serv....
Check Stock

The Gauge War: a dark fantasy from the age of steam (Engine Ward Book 2)

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

Small Block F-ord Intake Manifold - 351W Aluminum Carb Intake Manifold 1500-6500 Satin E42458

  • Our LowRise manifold for 351w engines is the ultimate street performance manifold for this engine.
  • Its long runner dual plane design provides the best of both worlds.
  • It provides good top end power without sacrificing bottom end torque..
  • This manifold has a number of features not found in similar competitive manifolds. It includes a rear water crossover passage which can provide for more balanced cylinder head temperatures and a cooler running engine.
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

How to Setup Your Guitar Like a Pro: An Easy Guide for Beginners

  • 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high ....
Check Stock

Red Seats, Volume 2 [Explicit]

  • Brand New Quick Fuel Technology Brawler Street Carburetor, Mechanical Secondaries, 750 CFM, 4150, Red Billet Color (Holley Part #BR-67320).
  • Brawler continues to lead the pack with their newest family of carburetors in a black with red billet color combination. While the look is new, the out of the box performance is the same that you have come to expect from Brawler..
  • Brawler Street carburetors come with red billet metering blocks with the latest technology in air/fuel calibrations for modern street or race engine demands. They also come with red billet throttle bodies for superior durability and throttle shaft stability..
  • Brawler Street models offer all of the options and tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish, and 4-corner idle adjustment on all mechanical secondary models..
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

Travelpro Platinum Elite Softside Expandable Luggage, 8 Wheel Spinner Suitcase, USB Port, Suiter, Men and Women, Bordeaux, Carry-On 21-Inch

  • Advanced digital refrigerant manifold & micron gauge for HVAC & Refrigeration diagnostics & service.
  • Fieldpiece digital manifold gauges accurately measure low & high pressure, with superheat and subcooling.
  • Advanced digital refrigerant manifold has protected thermocouple jacks for pipe and outdoor temps.
  • Four valve manifold with vacuum gauge has the ability for Job Link Psychrometer probes to connect to SMAN.
  • Equipped with a data log and temperature compensated system tightness test.
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock