ReviewsManifold Fitting

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock

Weber 67069 21 QCC1 Hose and Regulator for Spirit II 2017-2019 Genesis II 210/ LX 240 and Genesis II 300/400 2017-2019 Gas Grills

  • Genuine Weber part # 67069 21" QCC1 Hose and Regulator..
  • Fits: Spirit II (2017-2019), Genesis II 210/ LX 240, and Genesis II 300/ 400 (2017-2019) gas grills..
  • Female 3/8" flare connector fitting which attaches to a male fitting at the grill bulkhead or manifold.
Check Stock

Sewtanc Vacuum Block Intake,Aluminum 6 Port Vacuum Block Intake Manifold Kit,Wastegate Turbo Boost,Fuel Wastegate Turbo Boost 3/8in Inlet Outlet 1/8NPT,for Racing

  • 【Premium Material】New Universal Boost/Vacuum Manifold. T6061 aluminum billet is processed by high-quality CNC machine tools. The surface is anodized for a durable finish with a high finish. The perfect retrofit accessory, the billet vacuum manifold is a great add-on tuner that requires an extra vacuum source. Wastegate for boost vacuum block.
  • 【6 Port Block Intake】6 1/8" vacuum ports, also with plugs if the tuner doesn't need as many ports. This will relieve all the hassle of splitting the lines and making extra ports if needed, great for hooking up Pressurized controls, gauges and any components that require a separate vacuum source. You can also use tape for fuel and oil requirements..
  • 【Excellent Aftermarket Replacement】Includes 6X 1/8NPT Aluminum Fitting Ports for Boost Controllers, Map Sensors, Fuel Pressure Regulators, Boosters, Exhaust Valves and any other fuel/ignition that requires a vacuum source management components.
  • 【Additional Vacuum Source Required】A billet vacuum manifold is a great add-on tuner, and the design of supercharged cars and single throttle bodies requires multiple vacuum sources. Turbo vacuum ports for automotive vacuum block intake manifolds.
  • [After-sales guarantee] After you receive the product, if the product ....
Check Stock

CW209000AV Air Compressor Pressure Switch 135/100 PSI for Campbell Hausfeld

  • Air Compressor Pressure Switch 135/100/Part # CW209000AV.
  • 1/4" Quick disconnect fitting for check valve line.
Check Stock

W164 Vent Tab-for mercedes Gl450 2012 Vent Clips - Hlyjoon Air Vent Outlet Repair Kit A/C Air Conditioning Vent Outlet Tab Clip Repair Kit Brown Air Vent Tab Clip Fits for mercedes for Benz W164

  • EASILY CONVERT any R134a manifold gauge set to a R1234yf manifold gauge set.
  • R1234yf HIGH AND LOW SIDE COUPLERS allow recovery of entire refrigerant, including the space between the coupler & fitting.
  • MALE X FEMALE ADAPTER is 1/2” ACME-M x 1/2” ACME-F LH thread.
  • (2) MALE X FEMALE ADAPTERS are 12mm-M x 14mm-F R1234yf.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • ...r damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help radiator purge and coolant refill. Please check your radiator opening size before bidding, there are only 32mm 35mm 40mm 45mm, 4 sizes adapters.
  • EASY OPERATION: Completely discharge the old coolant and trapped air first. Use the adapter or work with a suitable adapter sleeve to seat on the radiator opening, rotate the golden knob to seal. Connec....
Check Stock

Half Mask Respirator, S/M, Single Filter

  • Stainless steel (hexavalent chromium), galvanized steel (zinc oxide), steel/manganese alloys, aluminum, cadmium and lead fumes.
  • OSHA Classification Loose-fitting powered air purifying respirator (no fit test required).
  • Patent-pending Dualtec manifold system optimizes helmet balance and sound, while 6-point air distribution system maximizes cooling through targeted air placement..
  • ClearLight lens technology optimizes contrast and clarity in light and welding states, easing eye strain..
  • NIOSH 42 CFR 84 (PAPR system) ANSI Z87.1+ 2015 (helmet).
Check Stock

Apollo PEX 6907932CP 32 Port PEX Manifold (3/4-inch Inlets, 1/2-inch Outlets) with Shutoff Valves

  • Fitting is Manufactured Sch 40, Gray Material.
  • Fittings are O-Ring Sealed and do not require paste, dope, or teflon tape.
Check Stock

Quluxe 1 Pack 3 Ways Aluminum Alloy Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/5-Inch Output Port, Silver

  • 1/4" BSP Female 2 Way 4 Port Solid Aluminum T-Shape Pneumatic Fitting Air Manifold Block Splitter.
Check Stock

BACOENG 5 Gallon Vacuum Chamber Kit with Vacuum Pump Standard HVAC

  • 5 Gallon Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc..
  • Silicone gasket to be used over 10,000 times without deterioration..
  • Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3.6CFM.
  •  Intake fitting: 1/4 inch Flare Oil Capacity : 220 ml.
Check Stock