ReviewsManual Miter Saw

DEWALT Miter Saw, 12-Inch, Double Bevel, Compound, XPS Cutline, 15-Amp (DWS716XPS)

  • Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade..
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence..
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree.
  • 0 degree - 50 degree left and right miter capacity.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles..
  • LED work light system provides adjustment-free cut line indication for accuracy and visibility..
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Gohelper Miter Saw Protractor Angle Finder Tool Guide case, 7 inch Aluminum Measuring Miter Gauge Protractor Inside & Outside Corner Angle Finder Protractor for Woodworking, Metal, Crown molding

  • Accurate Measurement: The miter saw protractor angle finder provides two scales: single cut and miter cut, external scale to measure a single cut and internal scale to measure a miter cut, conversion table which allows values of the spring and corner angles being converted into mitre and bevel angles..
  • Exquisite Craftsmanship: The O-ring design makes the saw protractor angle finderrotate full 360 degrees, ensures mitre saw protractors fit the corner smoothly when doing measuring operation, precise read on inside or outside corners. precision laser engraving scale ensure the dial is clear and easy to read..
  • Excellent Material: The miter saw protractor tool is made of aluminum alloy, which has strong wear resistance and corrosion resistance, expand itself service life, 7inch size and lightweight material makes it easy to carry..
  • 4. Wide Applications: the miter saw protractor guide can perform applications, such as measuring external angles, measuring internal angles, and measuring height angles, it is suitable for saw protractor for woodworking, metalworking, miter single cut, miter cut, crown shaped, pipe, and other carpentry applications..
  • Quality Assurance: We have great quality aluminum saw protractor, if you have any questions or problems in the proce....
Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

  • MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
  • USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
  • NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
  • Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
  • BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
  • PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....
Check Stock

ACEgoes 12" Miter Box with Saw Included, Reinforced Steel Back Saw for Accurate Cutting, Preset 90 Degree 45 Degree 22.5 Degree and 0 Degree Cuts

  • ☘【Accuracy】The cam-shaped pins can be twist and lock with honeycomb base to secure work for accurate cuts..
  • ☘ 【4 Cut Angles】Vertical slots in the miter box allow for the wood to be cut at 45 degrees, 22 1/2 degrees, and 90 degrees. and bevel cut at 45 degrees..
  • ☘【Durable】This miter box is made of high-impact polystyrene, sturdy built 1.5lb better than normal. and The reinforced saw blade is made of premium steel, double-sided mechanical grinding..
  • ☘【Safe】Minor injuries are the most you can expect when properly using a manual miter saw.
  • ☘【Quiet】Little noise will not bother others compared to power saws.
Check Stock

Carbon Motor Brushes Compatible for Dewalt DW718 / DWS780 / DW717 Miter Saw, Replacement Part for Power Tools - 2 Pack

  • Restores life to your DW718 DW718 / DWS780 / DW717 Miter Saw..
  • Replacement brushes suitable for Dewalt table saw, miter saw, crosscut miter saw, compound miter saw and circular saw power tools..
  • Carbon motor brushes comes complete with wire lead and connection terminal..
  • It is a common motor component replacement item fix for motor malfunctions..
  • This carbon brushes is a genuine Dewalt replacement part, change the carbon motor brush use the original spring is a better choice..
Check Stock

DEWALT Miter Saw Stand With Wheels (DWX726)

  • Easily adjustable mounting rails of DEWALT miter saw stand adapt to nearly any miter saw.
  • Miter saw stand with wheels featuring wide rubber grip provide easy jobsite mobility.
  • The rolling miter saw stand features three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up.
  • Durable tubular steel construction allows for a 300 lb maximum weight capacity.
  • Compact vertical storage option maximizes workplace efficiency and ease of transport.
  • Straightforward one-time assembly minimizes down time.
Check Stock

Saw

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

Miter Saw Box Set, 12Inch Plastic Miter Saw Box Kit Multiple Angle 90 Degrees 45 Degrees and 22.5 Degrees For Woodworking DIY Home Decoration Craftsmanship

  • 3 Cutting AnglesThe miter saw's bevel box has three angles of cut: 90 degree, 45 degree and 22.5 degree, you can choose the right angle for cutting according to your needs.
  • Precise PositioningThis miter saw set is used as a woodworking aid tool to help you better position and cut quickly, making your work easier.
  • Easy to UseThe miter saw is simple in structure and very convenient to use. It is in accordance with the design of human engineering mechanics and it is labor-saving.
  • Premium Alloy SteelThe rear saw of this product is made of SK5 alloy steel, sharp and durable. The miter box is made of ABS engineering plastic, which has high wear resistance.
  • ApplicationsComing with a 14" back saw, this miter saw kit is mainly used for woodworking DIY, home decoration, crafts, etc.
Check Stock

POWERTEC MT4000MBA Miter Saw Stand Mounting Brackets – Set of 2

  • INCLUDES: (2) Miter Saw Stand Mounting Brackets and mounting hardware.
  • FUNCTION: The perfect OEM replacement, this bracket assembly utilizes tool mounts to allows you to attach and detach your saw and power tools from your stand. Extra sets will allow you to quick change multiple tools..
  • DESIGN FEATURES: Ergonomically designed clamp handles for comfortable operation, along with a heavy-duty, durable steel construction featuring a black powder coated finish to withstand long-term wear and tear.
  • NON-MARRING: Equipped with premium plastic feet that can be used off the stand with level base to protect the brackets and prevent your work material from scratching.
  • COMPATIBILITY: IMPORTANT check the dimensions listed in the attached images to determine if these brackets fit your application. Fits miter saw stand frames made from 1-1/2” steel tubing with an overall width of 7” and can be adjusted +, - ½” Works with POWERTEC Deluxe Miter Saw Stand with Wheels and 110V Power Outlet (MT4000), along with the Ryobi Miter Saw Stand, and other similarly sized popular brands of miter saws stands..
Check Stock

DEWALT 20V MAX* 7-1/4-Inch Miter Saw, Cordless (DCS361M1)

  • DEWALT 20V miter saw utilizes 20V Max* battery pack (DCB204) which provides on average 183 cuts of 2x4 Pine or 275 cuts of 3-1/4 pine baseboard.
  • Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility for the mitre saw.
  • DEWALT miter saw has the capacity to cup 3 5/8-inch nested crown and 3 1/2 base vertically.
  • Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy,.
  • Oversized bevel scale makes bevel angle adjustments accurate and easy.
  • Compact, lightweight design (31.6 bs.) allows for easy transport and storage.
  • Cam lock miter handle delivers quick and accurate miter angles.
  • Precise miter system and machined base fence support optimize durability and cutting accuracy.
Check Stock