ReviewsManual Pneumatic Valves

PSCCO 8PCS Air Pneumatic Mufflers 1/4'' Bronze Exhaust Muffler Silencer

Package includes: 5 sintered bronze mufflers, 1 teflon tape.
Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.

Check Stock

Flexible Drill Extension Hex Shank Drill Nut Driver Bit Set, 2pcs Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, Screwdriver Bit Set, 105° Right Angle Drill Extension

Drill Extension Kit: Package included 2pcs bendable drill bit extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 10pcs screwdriver bit set, 1pcs 105° right angle drill extension, a complete match to meet daily needs..
Universal Socket Adapter Set: There are 3 pieces of socket adapters in different sizes, 1/4 inch, 3/8 inch, 1/2 inch, but they have the same size hex drill bit, which is 1/4 inch.
You can match them with your pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool..
Hex Shank Flexible Drill Extension: It come with a 105° right angle drill extension bit and a 11.7 in flexible extension bit.easy, lightweight, fast, connect to the standard hex screwdriver..
10pcs Screwdriver Bit Set: Screwdriver bit drill set is made of 45 steel, precision-ground, polished alloy steel, each piece under a rust-resistant satin finish with high hardness, very sturdy and durable to use..
Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills, manual screwdrivers and other hexagonal tools. A must-have package for conversion. Sufficient quantity and variety of tools to meet your various needs..

Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..

Check Stock

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

...ive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..

Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..

Check Stock

5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)

Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
They don't break easily, and have nice sealing performance, not easy to leak.
Air valve can be applied for a long time.
Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
They are suitable for PU/ PA/ PE/ PVC products.

Check Stock

Quickun Air Pneumatic Mufflers 1/4 Male Thread Sintered Bronze Exhaust Muffler Silencer Pack of 3

G-thread size: 1/4". Each package includes 3 sintered bronze mufflers..
Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.

Check Stock

Mtsooning 10PCS Air Pneumatic Flow Control Mufflers 1/4inch Exhaust Muffler Filters Bronze Thread Hex Brass Silencer Replacement for 1/4 NPT BSL-02

MATERIAL: The pneumatic Mufflers are made of copper, with high pressure resistant, not easy to rust and trip, providing better noise reduction..
SIZE: The size of the brass flow control muffler is thread outer diameter: 1/4 inch/12.5 mm.
thread length: 0.28 inch. Please pay attention to whether the size of the product matches your device before placing an order..
PRINCIPLE: The sintered exhaust muffler designed in many small holes drilled in the pipe wall, when the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
APPLICATION: The thread hex brass muffler can be used in air cylinder, solenoid valves, crankcase, gearbox, oil tanks and pneumatic tools, etc..
PACKAGE: You will receive 10PCS exhaust muffler filters, and if you have any question about our product , please contact us. We are here to serve and support..

Check Stock

Universal Socket Wrench Tool and Flexible Drill Bit Extension Set, Bendable Drill Bit Extension, 1/4 3/8 1/2\ Universal Socket Adapter Set, 105° Right Angle Drill Extension, Screwdriver Bit Kit

... right-angle drill bit extension, 1 x Universal Socket and 1pcs socket adapter, a complete match to meet daily needs..
Socket Adapter Set: There are 3 pieces of socket adapters in different sizes, 1/4 inch, 3/8 inch, 1/2 inch, but they have the same size hex drill bit, which is 1/4 inch.
You can match them with your pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool..
Universal Socket Wrench: Unique design of this universal socket can automatically adjust to any size or shape, suitable for standard 1/4 to 3/4 inches and metric 7mm to 19mm screws, nuts, and blots, meeting all your needs..
Bendable Flexible Drill Extension: Bendable drill bit extension can twisted and rotated at many different angles. It can be drilled into a small space, in a variety of gaps, rather than your hand, flexible installation work. Let our flexible drill bit extension tool help you solve more problems quickly..
Widely Used: Installed in the installation of pneumatic screwdrivers, electric screwdrivers, pneumatic drills, manual screwdrivers and other hexagonal tools. A must-have package for conversion. Sufficient quantity and variety of tools to meet your various needs..

Check Stock

Pneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp

...ference mechanics and dynamics design and the overall structure is ergonomic that the thin, compact fixture is suitable for narrow working spaces. With a total length of 300mm and a maximum clamping force of 230 kg,the Clamp helps to ensure the machining accuracy of the workpiece..
【operate easily】 This Cylinder Pneumatic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages,....

Check Stock

LEGO Technic Material Handler Crane 42144 Building Toy Set for Kids, Boys, and Girls Ages 10+ (835 Pieces)

This LEGO Technic Material Handler model crane toy features manual and pneumatic functions for kids to learn how this mighty truck works.
The LEGO pneumatic functions include a movable arm with a reach of approximately 13 inches, plus a functioning ‘orange peel’ style grapple.
The manual functions: upper arm that rotates 360 degrees, elevating operating cab, a mobile undercarriage system with steering and 4 outriggers.
LEGO Technic construction toys feature realistic movement and mechanisms that introduce young builders to the universe of engineering.
This mechanical toy with a range of functions is a great gift for fans of LEGO Technic construction vehicle toys and kids aged 10 plus years old.

Check Stock