ReviewsManufacturer Green Laser Module

Laser Kit for S&W SD9VE, SD9, SD40VE, SD40 w/ LASERPRO Holster, Grip Activated ArmaLaser GTO-G Green Laser Sight & 2 Extra Batteries (Does NOT fit SW9VE or SW40VE)

Laser Kit Includes LASERPRO Laser Holster & Grip-Activated ArmaLaser GTO-G GREEN Laser Sight & 2 Extra Batteries.
Middle finger will always touch the gold-plated touch sensor on the FLX Strip of the GTO Series where the trigger guard ends. NO adapter required – laser sight fits directly onto rail of gun..
Grip-Activated Green Laser Sight for S&W SD9VE, SD9, SD40VE & SD40 with Holster that fits pistol with laser attached (Does NOT fit SW9VE or SW40VE).
5 YEAR INDUSTRY LEADING WARRANTY only Laser & 1 Year on Holster! Full control over windage (left to right) and elevation (up and down) adjustments..
Green lasers are brighter than red, especially for daytime use. Class 3R 520nm .

Check Stock

Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module.
Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use..

Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..

Check Stock

Gxcdizx RD-DKL034-ND Internal Disk Drive Replacement for NES WIIU Game Console DKL101-ND DKL034-ND 102-ND

➤ Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module Replacement for Nintendo Wii U.
➤ Fitment: for Nintendo Wii U (Please check your machine model before your purchase).
➤ Tips: This is Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module replacement to replace your old damage Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module, don't include instructions, please install it by a professional technician..
➤ Please contact us if you received the part damaged or if the part you ordered did not fix your problem.We would like to ensure 100% customer satisfaction for you..
➤ Package contents: 1x Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module for Nintendo Wii U.

Check Stock

20W Laser Module Kit for 3018 CNC Router Machine, IKLESTAR 5.5W Optical Power 12V 450nm Laser Head for 3018 Pro/3020 PLUS, Engraving Tool for Wood and Metal DIY

【Excellent 20W Laser】The optical power of laser module is 5.5W. It has 0.08mm sharp compressed focal point and 0.01mm engraving accuracy. The cutting speed is faster, and the engraving accuracy is higher.
【Fixed Focus & Powerful】The fixed focus distance is 20mm. At the same power, this laser module can cut 4mm wood perfectly at once. It is ideal for engraving and cutting many different materials such as plywood, bamboo, cardboard, acrylic, MDF, etc..
【Long Service Life】Equipped with high-quality aluminum heatsink and cooling fan, this can help the heat dissipate faster and ensure the module works continuously. This laser module can work at full power for 8 hours. The service life can be up to 10,000 hours.
【Widely Applicable】Our laser module is compatible with LaserGRBL, LightBurn and most engraving software. LaserGRBL software is compatible with Windows system, LightBurn is compatible with Mac OS and Windows system. Compatible with engraving machines and CNC milling machines 3018 series.
【Customer Service】We are proud of our customer service and providing 1....

Check Stock

Creality 3D Printer Laser Engraver Module Ender 3 S1 Laser Engraving Kit 5W 24V 455nm Blue-Violet Light, Safety Cover, Fixed Focus, and Soot Absorption for Ender 3 S1, Ender 3 S1 Pro & Ender 3 S1 Plus

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality. The 5W high-power engraving speed is faster, and the accuracy is higher..
Fixed Focus: Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. The unique convenient focusing unit can quickly and accurately fix the focus and make the best engraving effect..
Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve airflow, all of which contribute to fast and efficient heat dissipation, the built-in air filter cotton can absorb smoke and odor, allowing for prolonged service life..
Full Protection: Upgraded with a new safety cover that meets FDA Class 4 safety level requirements to prevent laser damage to eyes and skin..
Compatibility and Application: The laser module is compatible with Ender 3 S1, Ender 3 S1 Pro, and Ender 3 S1 Plus. It can be used to cut cardboard, wood, bamboo, rubber, leather, acrylic, plastic, etc..

Check Stock

Green Rechargeable Laser Sight for Taurus G2 G2C G2S G3 G3c & Compact Guns & Pistols w/ a Rail - Micro USB Charger

LASERPRO Rechargeable Green Laser Sight w/ Green Beam that's visible in daylight!.
Ambidextrous: on/off buttons accessible on the left or right side of the laser. Class 3R 635nm .
FITS pistols and guns with rails that have a distance of 1.25" between the cross notch in the rail to the front of the trigger guard..
1 Year manufacturer's warranty handled by Lasersightpro when purchased through Cyber Marketing, LLC.
Green Laser is Adjustable for windage and elevation with included allen wrench..

Check Stock

Laser Kit for Glock 42, 43, 43x (NOT The MOS or Any w/ a Rail) & 48 Pistols w/ Tactical Holster, Touch-Activated ArmaLaser TR5-G Green Laser Sight & 2 Extra Batteries

Touch-Activated Laser Sight for Glock 42, 43, 43x & 48 Pistols (NOT the MOS or any w/ a rail).
Laser Kit Includes Tactical Laser Holster & Touch-Activated ArmaLaser TR5-G Laser Sight & 2 Extra Batteries.
Middle finger will always touch the gold-plated touch sensor on the TR Series where the trigger guard ends. NO adapter required – laser sight fits directly onto trigger guard of gun.
5 YEAR INDUSTRY LEADING WARRANTY only Laser & 1 Year on Holster! Full control over windage (left to right) and elevation (up and down) adjustments..
Green lasers are brighter than red, especially for daytime use. Class 3R 520nm .

Check Stock

High Power 520nm-1000 Green Dot Laser Diode Module with Cooling Fan for Clothes Cutting/Wood Cutting/Mechanical Positioning Laser Module + Adapter + Bracket

Wavelength: 520nm (center wavelength) / Dimensions: 33x33x65mm / Output power(mW): 1000 / Conector: 1M DC Wire with 5.5-2.1mm.
Glass lens produces an elliptical collimated beam or focal spot. ACC (Auto Current Control) has a constant value of input current. Aluminum structure for the best shock resistance and better heat transfer consideration..
Green laser, has an integrated optic, compact size with PCB inside Ideal for Clothes Cutting/Wood Cutting/Mechanical Positioning/Laser Positioning..
Package: 1 Laser Module + 1 Fixed Bracket (Standard Mount) + 1 US Power Adapter (if you need EU Adapter please leave message)..
Standard Shipping usually takes 6 to 13 days after date of shipment..

Check Stock

Twotrees Laser Engraver TR2 Pro 4 in 1 Rotating Module for Engraving Cylindrical Objects, Wine Glass, Tumbler, Ring,Y-axis Rotary Roller Module for TTS-25,TTS-55,TS2 Laser Engraving Machine

The Twotrees 4-in-1 rotary module for laser engraver machine is a high-precision and easy-to-use product designed for the engraving needs of laser engraving enthusiasts, designers, small and micro enterprises, and carpenters.By using laser engraver and this rotary module to achive all of your creativity..
Multi-functional: an engraving module that integrates four engraving functions: roller rotary, chuck rotary, sphere rotary, ring rotary. It can meet the clamping and engraving of various special-shaped workpieces, and solve the engraving needs of most users.
Such as wine glass, yeti tumbler, baseball bat, ring, ball, or mug with handle..
Highly Precise Engraving ： High-precision engraving can be achieved with different components. TR2 Pro Laser can hold the object tightly with a soft-pad covering jaws chuck, allowing smooth and efficient operation. The maximum vector engraving speed can reach 360°/s. The laser rotary module packs a precision stepper motor with a minimum angle of 0.45°, amazing detail on the engraving of the Chuck Rotary..
Wide compatibility : Default 80CM two types of motor adapters are suitable for dif....

Check Stock

Ucreate 3D Printer Laser Engraver Kit for Ender-3 S1/pro 24V 1.6W Engraving Laser Modules Simple Installation Safety Protection Precise Focusing Soot Absorption

Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances..
Compatible with Ender-3 S1/Ender-3 S1 Pro/CV-01 Carving Machine, can be adapted to various 3D printers, laser engraving machine, CNC engraving machine and other machines according to requirements..

Check Stock